DLA MS35685 REV A-1969 RIVET SPLIT OVAL HEAD BRASS《黄铜半圆头裂痕柳钉》.pdf

《DLA MS35685 REV A-1969 RIVET SPLIT OVAL HEAD BRASS《黄铜半圆头裂痕柳钉》.pdf》由会员分享，可在线阅读，更多相关《DLA MS35685 REV A-1969 RIVET SPLIT OVAL HEAD BRASS《黄铜半圆头裂痕柳钉》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、MS35b85 REV A 53 = 7777732 0005727 B M Ei! !i fl-L5- width of slot - k0.005; depth of slot - f0.015, unless other- wise specified. 5. PART NUUBERS: The US part number consists of the US number plus the dash number. Example: US35685-1. 6. 7. Referenced documents shall be of the issue in effect on dat

2、e of invitations for bid. 8. For design feature purposes, this standard takcs precedence over procurenent documents ref- erenced herein. A washer should be used under the split end of the rivet when riveting soft materials. 9. The bearing surface of oval head rivets shall be at right angles with the axis of the rivet shank within two degrees. ENTIRE STANDARD REVISED MILITARY STAWDAR .A YC TITLt ihawt os 82 MS35685 RIVET, SPLIT- OVAL HE AD, BRASS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-