DLA DSCC-DWG-06015 REV B-2012 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM.pdf

《DLA DSCC-DWG-06015 REV B-2012 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM.pdf》由会员分享，可在线阅读，更多相关《DLA DSCC-DWG-06015 REV B-2012 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Add part purchase requirement 6 Dec 2006 Michael A. Radecki B Add an approved source of supply. 30 August 2012 Michael A. Radecki Prepared in accordance with ASME Y14.100 Source control drawing REV STATUS OF PAGES REV B B B B B B B B B B B B B B B PAGES 1 2

2、 3 4 5 6 7 8 9 10 11 12 13 14 15 PMIC N/A PREPARED BY Ken Bernier DESIGN ACTIVITY: DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH Original date of drawing 11 May 2006 CHECKED BY Patrick Kyne TITLE CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM APPROVED BY Michael A. Radecki SIZE A CO

3、DE IDENT. NO. 037Z3 DWG NO. 06015 SCALE N/A REV B PAGE 1 OF 15 AMSC N/A 5910-2012-E14CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 HAS CHANGED NAMES TO: DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE

4、 SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 06015 REV B PAGE 2 1. SCOPE 1.1 Scope. This drawing and MIL-PRF-39006/30 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/30 capacitors with additional test re

5、quirements for use in high reliability applications. 1.2 Part or Identifying Number (PIN). The complete PIN is as follows: 06015- XXXXH Drawing Dash number number (see table I) 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specifi

6、cation. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirement

7、s of documents cited in sections 3 and 4 of this specification, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwi

8、se specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-39006 - Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD

9、-202 - Electronic and Electrical Component Parts. MIL-STD-1285 - Marking of Electrical and Electronic Parts. MIL-STD-1276 - Leads for Electronic Component Parts (Copies of these documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700

10、Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, ho

11、wever, supersedes applicable laws and regulations unless a specific exemption has been obtained. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 06015 REV B PAGE 3 NOT

12、ES: 1. Dimensions are in inches. 2. Metric equivalents are in parentheses. 3. Metric equivalents are given for general information only. 4. The weld shall not be enclosed in the end seal. Case size Dimensions Basic case Insulated case E .250 (6.35) L 1/ +.031 (0.79) -.016 (0.41) D .016 (0.41) D max

13、T1 .453 (11.51) .188 (4.78) .219 ( 5.56) 1.500 (38.10) T2 .641 (16.28) .281 (7.14) .312 ( 7.92) 2.250 (57.15) T3 .766 (19.46) .375 (9.52) .406 (10.31) 2.250 (57.15) T4 1.062 (26.97) .375 (9.52) .406 (10.31) 2.250 (57.15) 1/ Length of basic case sleeving shall be as specified in MIL-PRF-39006. FIGURE

14、 1. Configuration and dimensions. + + + - + Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 06015 REV B PAGE 4 3. REQUIREMENTS 3.1 Item requirements. The individual it

15、em requirements shall be in accordance with MIL-PRF-39006/30 “R” failure rate level, “H” shock and vibration requirements and the requirements specified herein. 3.1.1 Dimensions and configuration: See figure 1. 3.1.2 Case type: Tantalum, tubular, insulated. 3.1.3 Seal type: Hermetic (glass-to-tantal

16、um anode). 3.1.4 Terminals: Axial-wire lead: Cathode and anode (N32, N51, or N52 of MIL-STD-1276). 3.1.5 Rated voltage: See table I. 3.1.6 Capacitance (Cap.) (nom): See table I. 3.1.7 Cap. tolerance: See table I. 3.1.8 DC leakage: See table I. 3.1.9 Dissipation factor: See table I. 3.1.10 Equivalent

17、 series resistance (ESR). See table I. 3.1.11 Operating temperature: -55C to +85C, voltage de-rated to +125C (see figure 2). FIGURE 2. Voltage derating with temperature. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS

18、COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 06015 REV B PAGE 5 TABLE I. Capacitor characteristics. Rated voltage (+85C) 1/ Cap. Cap. toler-ance DC leakage (max) Dissi-pation factor (max) ESR at +25C (max) 2/ Derated voltage (+125C) 1/ Surge voltage (+85C) Imped- ance (max) Capacitance change

19、at Max +85C 40 kHz ripple current 3/ Case size DSCC drawing PIN 06015- +25C +85C +125C -55C +85C +125C V dc F % A A % Ohms V dc V dc Ohms % % % mA rms 6 30 20 1 2 4.5 1.99 4 6.9 100 -40 +10.5 +12 820 T1 0441H 6 30 10 1 2 4.5 1.99 4 6.9 100 -40 +10.5 +12 820 T1 0442H 6 30 5 1 2 4.5 1.99 4 6.9 100 -40

20、 +10.5 +12 820 T1 0443H 6 68 20 1 2 7.5 1.58 4 6.9 60 -40 +14 +16 960 T1 0444H 6 68 10 1 2 7.5 1.58 4 6.9 60 -40 +14 +16 960 T1 0445H 6 68 5 1 2 7.5 1.58 4 6.9 60 -40 +14 +16 960 T1 0446H 6 140 20 1 3 10.5 0.99 4 6.9 40 -40 +14 +16 1,200 T2 0447H 6 140 10 1 3 10.5 0.99 4 6.9 40 -40 +14 +16 1,200 T2

21、0448H 6 140 5 1 3 10.5 0.99 4 6.9 40 -40 +14 +16 1,200 T2 0449H 6 270 20 1 6.5 22.5 1.11 4 6.9 25 -44 +17.5 +20 1,375 T2 0450H 6 270 10 1 6.5 22.5 1.11 4 6.9 25 -44 +17.5 +20 1,375 T2 0451H 6 270 5 1 6.5 22.5 1.11 4 6.9 25 -44 +17.5 +20 1,375 T2 0452H 6 330 20 2 7.9 18 0.73 4 6.9 20 -44 +14 +16 1,80

22、0 T3 0453H 6 330 10 2 7.9 18 0.73 4 6.9 20 -44 +14 +16 1,800 T3 0454H 6 330 5 2 7.9 18 0.73 4 6.9 20 -44 +14 +16 1,800 T3 0455H 6 560 20 2 13 27.5 0.65 4 6.9 25 -64 +17.5 +20 1,900 T3 0456H 6 560 10 2 13 27.5 0.65 4 6.9 25 -64 +17.5 +20 1,900 T3 0457H 6 560 5 2 13 27.5 0.65 4 6.9 25 -64 +17.5 +20 1,

23、900 T3 0458H 6 1,200 20 3 14 45 0.50 4 6.9 20 -80 +25 +25 2,265 T4 0459H 6 1,200 10 3 14 45 0.50 4 6.9 20 -80 +25 +25 2,265 T4 0460H 8 25 20 1 2 3.75 1.99 5 9.2 100 -40 +10.5 +12 820 T1 0461H 8 25 10 1 2 3.75 1.99 5 9.2 100 -40 +10.5 +12 820 T1 0462H 8 25 5 1 2 3.75 1.99 5 9.2 100 -40 +10.5 +12 820

24、T1 0463H 8 56 20 1 2 7 1.66 5 9.2 59 -40 +14 +16 900 T1 0464H 8 56 10 1 2 7 1.66 5 9.2 59 -40 +14 +16 900 T1 0465H 8 56 5 1 2 7 1.66 5 9.2 59 -40 +14 +16 900 T1 0466H 8 120 20 1 2 10 1.11 5 9.2 50 -44 +17.5 +20 1,220 T2 0467H 8 120 10 1 2 10 1.11 5 9.2 50 -44 +17.5 +20 1,220 T2 0468H 8 120 5 1 2 10

25、1.11 5 9.2 50 -44 +17.5 +20 1,220 T2 0469H 8 220 20 1 7 18.5 1.12 5 9.2 30 -44 +17.5 +20 1,370 T2 0470H 8 220 10 1 7 18.5 1.12 5 9.2 30 -44 +17.5 +20 1,370 T2 0471H 8 220 5 1 7 18.5 1.12 5 9.2 30 -44 +17.5 +20 1,370 T2 0472H 8 290 20 2 6 17 0.78 5 9.2 25 -64 +17.5 +20 1,770 T3 0473H 8 290 10 2 6 17

26、0.78 5 9.2 25 -64 +17.5 +20 1,770 T3 0474H 8 290 5 2 6 17 0.78 5 9.2 25 -64 +17.5 +20 1,770 T3 0475H 8 430 20 2 14 23 0.71 5 9.2 25 -64 +17.5 +20 1,825 T3 0476H 8 430 10 2 14 23 0.71 5 9.2 25 -64 +17.5 +20 1,825 T3 0477H 8 430 5 2 14 23 0.71 5 9.2 25 -64 +17.5 +20 1,825 T3 0478H 8 850 20 4 16 30 0.4

27、7 5 9.2 22 -80 +25 +25 2,330 T4 0479H 8 850 10 4 16 30 0.47 5 9.2 22 -80 +25 +25 2,330 T4 0480H 10 20 20 1 2 3 1.99 7 11.5 175 -32 +10.5 +12 820 T1 0481H 10 20 10 1 2 3 1.99 7 11.5 175 -32 +10.5 +12 820 T1 0482H 10 20 5 1 2 3 1.99 7 11.5 175 -32 +10.5 +12 820 T1 0483H 10 47 20 1 2 6.5 1.84 7 11.5 10

28、0 -36 +14 +16 855 T1 0484H 10 47 10 1 2 6.5 1.84 7 11.5 100 -36 +14 +16 855 T1 0485H 10 47 5 1 2 6.5 1.84 7 11.5 100 -36 +14 +16 855 T1 0486H 10 100 20 1 4 7.5 0.99 7 11.5 60 -36 +14 +16 1,200 T2 0487H 10 100 10 1 4 7.5 0.99 7 11.5 60 -36 +14 +16 1,200 T2 0488H 10 100 5 1 4 7.5 0.99 7 11.5 60 -36 +1

29、4 +16 1,200 T2 0489H 10 180 20 1 7 15 1.11 7 11.5 40 -36 +14 +16 1,365 T2 0490H See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A CODE IDENT NO. 037Z3 DWG NO. 06015 RE

30、V B PAGE 6 TABLE I. Capacitor characteristics - Continued. Rated voltage (+85C) 1/ Cap. Cap. toler-ance DC leakage (max) Dissi-pation factor (max) ESR at +25C (max) 2/ Derated voltage (+125C) 1/ Surge voltage (+85C) Imped- ance (max) Capacitance change at Max +85C 40 kHz ripple current 3/ Case size

31、DSCC drawing PIN 06015- +25C +85C +125C -55C +85C +125C V dc F % A A % Ohms V dc V dc Ohms % % % mA rms 10 180 10 1 7 15 1.11 7 11.5 40 -36 +14 +16 1,365 T2 0491H 10 180 5 1 7 15 1.11 7 11.5 40 -36 +14 +16 1,365 T2 0492H 10 250 20 2 10 15 0.80 7 11.5 30 -40 +14 +16 1,720 T3 0493H 10 250 10 2 10 15 0

32、.80 7 11.5 30 -40 +14 +16 1,720 T3 0494H 10 250 5 2 10 15 0.80 7 11.5 30 -40 +14 +16 1,720 T3 0495H 10 390 20 2 16 22 0.75 7 11.5 25 -64 +17.5 +20 1,800 T3 0496H 10 390 10 2 16 22 0.75 7 11.5 25 -64 +17.5 +20 1,800 T3 0497H 10 390 5 2 16 22 0.75 7 11.5 25 -64 +17.5 +20 1,800 T3 0498H 10 750 20 4 16

33、25 0.44 7 11.5 23 -80 +25 +25 2,360 T4 0499H 10 750 10 4 16 25 0.44 7 11.5 23 -80 +25 +25 2,360 T4 0500H 15 15 20 1 2 2.5 2.21 10 17.2 155 -24 +10.5 +12 780 T1 0501H 15 15 10 1 2 2.5 2.21 10 17.2 155 -24 +10.5 +12 780 T1 0502H 15 15 5 1 2 2.5 2.21 10 17.2 155 -24 +10.5 +12 780 T1 0503H 15 33 20 1 2

34、5 2.01 10 17.2 90 -28 +14 +16 820 T1 0504H 15 33 10 1 2 5 2.01 10 17.2 90 -28 +14 +16 820 T1 0505H 15 33 5 1 2 5 2.01 10 17.2 90 -28 +14 +16 820 T1 0506H 15 70 20 1 4 6.5 1.23 10 17.2 75 -28 +14 +16 1,150 T2 0507H 15 70 10 1 4 6.5 1.23 10 17.2 75 -28 +14 +16 1,150 T2 0508H 15 70 5 1 4 6.5 1.23 10 17

35、.2 75 -28 +14 +16 1,150 T2 0509H 15 120 20 1 7 9 0.99 10 17.2 50 -28 +17.5 +20 1,450 T2 0510H 15 120 10 1 7 9 0.99 10 17.2 50 -28 +17.5 +20 1,450 T2 0511H 15 120 5 1 7 9 0.99 10 17.2 50 -28 +17.5 +20 1,450 T2 0512H 15 170 20 2 10 12.5 0.98 10 17.2 35 -32 +14 +16 1,480 T3 0513H 15 170 10 2 10 12.5 0.

36、98 10 17.2 35 -32 +14 +16 1,480 T3 0514H 15 170 5 2 10 12.5 0.98 10 17.2 35 -32 +14 +16 1,480 T3 0515H 15 270 20 2 16 16 0.79 10 17.2 30 -56 +17.5 +20 1,740 T3 0516H 15 270 10 2 16 16 0.79 10 17.2 30 -56 +17.5 +20 1,740 T3 0517H 15 270 5 2 16 16 0.79 10 17.2 30 -56 +17.5 +20 1,740 T3 0518H 15 540 20

37、 6 24 20 0.49 10 17.2 23 -80 +25 +25 2,330 T4 0519H 15 540 10 6 24 20 0.49 10 17.2 23 -80 +25 +25 2,330 T4 0520H 25 10 20 1 2 2 2.66 15 28.8 220 -16 +8 +9 715 T1 0521H 25 10 10 1 2 2 2.66 15 28.8 220 -16 +8 +9 715 T1 0522H 25 10 5 1 2 2 2.66 15 28.8 220 -16 +8 +9 715 T1 0523H 25 22 20 1 2 3.3 1.99 1

38、5 28.8 140 -20 +10.5 +12 825 T1 0524H 25 22 10 1 2 3.3 1.99 15 28.8 140 -20 +10.5 +12 825 T1 0525H 25 22 5 1 2 3.3 1.99 15 28.8 140 -20 +10.5 +12 825 T1 0526H 25 50 20 1 2 5.5 1.46 15 28.8 70 -28 +13 +15 1,130 T2 0527H 25 50 10 1 2 5.5 1.46 15 28.8 70 -28 +13 +15 1,130 T2 0528H 25 50 5 1 2 5.5 1.46

39、15 28.8 70 -28 +13 +15 1,130 T2 0529H 25 100 20 1 10 7.5 0.99 15 28.8 50 -28 +13 +15 1,435 T2 0530H 25 100 10 1 10 7.5 0.99 15 28.8 50 -28 +13 +15 1,435 T2 0531H 25 100 5 1 10 7.5 0.99 15 28.8 50 -28 +13 +15 1,435 T2 0532H 25 120 20 2 6 10.5 1.16 15 28.8 38 -32 +13 +15 1,450 T3 0533H 25 120 10 2 6 1

40、0.5 1.16 15 28.8 38 -32 +13 +15 1,450 T3 0534H 25 120 5 2 6 10.5 1.16 15 28.8 38 -32 +13 +15 1,450 T3 0535H 25 180 20 2 18 13 0.96 15 28.8 32 -48 +13 +15 1,525 T3 0536H 25 180 10 2 18 13 0.96 15 28.8 32 -48 +13 +15 1,525 T3 0537H 25 180 5 2 18 13 0.96 15 28.8 32 -48 +13 +15 1,525 T3 0538H 25 350 20

41、7 28 17.5 0.67 15 28.8 24 -70 +25 +25 1,970 T4 0539H 25 350 10 7 28 17.5 0.67 15 28.8 24 -70 +25 +25 1,970 T4 0540H See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO SIZE A C

42、ODE IDENT NO. 037Z3 DWG NO. 06015 REV B PAGE 7 TABLE I. Capacitor characteristics - Continued. Rated voltage (+85C) 1/ Cap. Cap. toler-ance DC leakage (max) Dissi-pation factor (max) ESR at +25C (max) 2/ Derated voltage (+125C) 1/ Surge voltage (+85C) Imped- ance (max) Capacitance change at Max +85C

43、 40 kHz ripple current 3/ Case size DSCC drawing PIN 06015- +25C +85C +125C -55C +85C +125C V dc F % A A % Ohms V dc V dc Ohms % % % mA rms 30 8 20 1 2 2 3.32 20 34.5 275 -16 +8 +12 640 T1 0541H 30 8 10 1 2 2 3.32 20 34.5 275 -16 +8 +12 640 T1 0542H 30 8 5 1 2 2 3.32 20 34.5 275 -16 +8 +12 640 T1 05

44、43H 30 15 20 1 2 2.5 2.21 20 34.5 175 -20 +10.5 +12 780 T1 0544H 30 15 10 1 2 2.5 2.21 20 34.5 175 -20 +10.5 +12 780 T1 0545H 30 15 5 1 2 2.5 2.21 20 34.5 175 -20 +10.5 +12 780 T1 0546H 30 40 20 1 5 5 1.66 20 34.5 65 -24 +10.5 +12 1,120 T2 0547H 30 40 10 1 5 5 1.66 20 34.5 65 -24 +10.5 +12 1,120 T2

45、0548H 30 40 5 1 5 5 1.66 20 34.5 65 -24 +10.5 +12 1,120 T2 0549H 30 68 20 1 8 6.5 1.27 20 34.5 60 -24 +13 +15 1,285 T2 0550H 30 68 10 1 8 6.5 1.27 20 34.5 60 -24 +13 +15 1,285 T2 0551H 30 68 5 1 8 6.5 1.27 20 34.5 60 -24 +13 +15 1,285 T2 0552H 30 100 20 2 12 8.5 1.13 20 34.5 40 -28 +10.5 +12 1,450 T

46、3 0553H 30 100 10 2 12 8.5 1.13 20 34.5 40 -28 +10.5 +12 1,450 T3 0554H 30 100 5 2 12 8.5 1.13 20 34.5 40 -28 +10.5 +12 1,450 T3 0555H 30 150 20 2 18 11.5 1.02 20 34.5 35 -48 +13 +15 1,525 T3 0556H 30 150 10 2 18 11.5 1.02 20 34.5 35 -48 +13 +15 1,525 T3 0557H 30 150 5 2 18 11.5 1.02 20 34.5 35 -48

47、+13 +15 1,525 T3 0558H 30 300 20 8 32 15.5 0.69 20 34.5 25 -60 +25 +25 1,950 T4 0559H 30 300 10 8 32 15.5 0.69 20 34.5 25 -60 +25 +25 1,950 T4 0560H 50 5 20 1 2 1.5 3.98 30 57.5 400 -16 +5 +6 580 T1 0561H 50 5 10 1 2 1.5 3.98 30 57.5 400 -16 +5 +6 580 T1 0562H 50 5 5 1 2 1.5 3.98 30 57.5 400 -16 +5

48、+6 580 T1 0563H 50 10 20 1 2 2 2.66 30 57.5 250 -24 +8 +9 715 T1 0564H 50 10 10 1 2 2 2.66 30 57.5 250 -24 +8 +9 715 T1 0565H 50 10 5 1 2 2 2.66 30 57.5 250 -24 +8 +9 715 T1 0566H 50 25 20 1 5 4 2.13 30 57.5 95 -20 +10.5 +12 1,005 T2 0567H 50 25 10 1 5 4 2.13 30 57.5 95 -20 +10.5 +12 1,005 T2 0568H 50 25 5 1 5 4 2.13 30 57.5 95 -20 +10.5 +12 1,005 T2 0569H 50 47 20 1 9 5.5 1.56 30 57.5 70 -28 +13 +15 1,155 T2 0570H 50 47 10 1 9 5.5 1.56 30 57.5 70 -28 +13 +15 1,155 T2 05