DIN EN ISO 15877-1-2011 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 General (ISO 15877-1 2009 + AMD 1 2010) Ger.pdf

《DIN EN ISO 15877-1-2011 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 General (ISO 15877-1 2009 + AMD 1 2010) Ger.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 15877-1-2011 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 General (ISO 15877-1 2009 + AMD 1 2010) Ger.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、March 2011 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、23.040.01!$ne“1752566www.din.deDDIN EN ISO 15877-1Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General (ISO 15877-1:2009 + AMD 1:2010)English translation of DIN EN ISO 15877-1:2011-03Kunststoff-Rohrleitungssysteme fr die Warm- und Kalt

3、wasserinstallation Chloriertes Polyvinylchlorid (PVC-C) Teil 1: Allgemeines (ISO 15877-1:2009 + AMD 1:2010)Englische bersetzung von DIN EN ISO 15877-1:2011-03Systmes de canalisations en plastique pour les installations deau chaude et froide Poly(chlorure de vinyle) chlor (PVC-C) Partie 1: Gnralits (

4、ISO 15877-1:2009 + AMD 1:2010)Traduction anglaise de DIN EN ISO 15877-1:2011-03SupersedesDIN EN ISO 15877-1:2009-07www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 22 pages03.11 DIN EN ISO 15877-1:2011-03 2 A comma is used as the decimal

5、 marker. National foreword This standard has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” (Secretariat: NEN, Netherlands), Working Group WG 16 “Systems for hot and cold water applications” (lead-management: SIS, Sweden) in collaboration with ISO/TC 13

6、8 “Plastics pipes, fittings and valves for the transport of fluids”, Subcommittee SC 2 “Plastics pipes and fittings for water supplies” (Secretariat: SNV, Switzerland). Normenausschuss Wasserwesen (Water Practice Standards Committee), Working Committee NA 119-04-06-05 GUA Kunststoffrohre in der Trin

7、k-wasserversorgung; Warm- und Kaltwasserleitungen. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. The DIN Standards corresponding to the International Standards referred to in this document are as follows, whereby EN ISO Standards are only listed

8、 below if these have not been published as DIN EN ISO Standards with the same number: ISO 472 DIN EN ISO 472 ISO 1043-1 DIN EN ISO 1043-1 ISO 1158 DIN EN ISO 1158 ISO 1183-1 DIN EN ISO 1183-1 ISO 9080 DIN EN ISO 9080 ISO 15877-2 DIN EN ISO 15877-2 ISO 15877-3 DIN EN ISO 15877-3 ISO 15877-5 DIN EN IS

9、O 15877-5 ISO/TS 15877-7 DIN ISO/TS 15877-7 Amendments This standard differs from DIN EN ISO 15877-1:2009-07 as follows: a) the scope has been extended to include chlorinated poly(vinyl chloride) (PVC-C) piping systems, Type I, on underfloor heatings and low temperature radiators (Application Class

10、4 according to ISO 10508) for design pressures of 4 bar and 6 bar. Previous editions DIN EN ISO 15877-1: 2004-03, 2009-07 The responsible German body involved in its preparation was the DIN EN ISO 15877-1:2011-03 3 National Annex NA (informative) Bibliography DIN EN ISO 472, Plastics Vocabulary DIN

11、EN ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics DIN EN ISO 1158, Plastics Vinyl chloride homopolymers and copolymers Determination of chlorine content DIN EN ISO 1183-1, Plastics Methods for determining the density of non-cellular plasti

12、cs Part 1: Immersion method, liquid pyknometer method and titration method DIN EN ISO 9080, Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation DIN EN ISO 15877-2, Plastics piping systems for hot and cold w

13、ater installations Chlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes DIN EN ISO 15877-3, Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings DIN EN ISO 15877-5, Plastics piping systems for hot and cold water installations Chlori

14、nated poly(vinyl chloride) (PVC-C) Part 5: Fitness for purpose of the system DIN ISO/TS 15877-7, Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity DIN EN ISO 15877-1:2011-03 4 This page is intention

15、ally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15877-1 March 2009 November 2010 ICS 23.040.20; 91.140.60 Supersedes EN ISO 15877-1:2003English version Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General (ISO 15877

16、-1:2009 + AMD 1:2010) Systmes de canalisations en plastique pour les installations deau chaude et froide Poly(chlorure de vinyle) chlor (PVC-C) Partie 1: Gnralits (ISO 15877-1:2009 + AMD 1:2010) Kunststoff-Rohrleitungssysteme fr die Warm- und Kaltwasserinstallation Chloriertes Polyvinylchlorid (PVC-

17、C) Teil 1: Allgemeines (ISO 15877-1:2009 + AMD 1:2010) EN ISO 15877-1:2009-03 was approved by CEN on 2009-02-28 and Amendment A1:2010 on 2010-10-31. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o

18、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version

19、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, D

20、enmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMAL

21、ISATIONEUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15877-1:2009 + A1:2010 E+ A1 Contents Page Foreword to EN ISO 15877-1:2009 3 !Forew

22、ord to EN ISO 15877-1:2009/A1:20104 Introduction.5 1 Scope6 2 Normative references6 3 Terms and definitions, symbols and abbreviated terms.7 3.1 Terms and definitions .7 3.2 Symbols and abbreviated terms 10 4 Classification of service conditions 12 5 Material .13 5.1 General .13 5.2 Density13 5.3 Ch

23、lorine content 13 5.4 Hydrostatic stress properties 13 5.5 Verification of the malfunction temperature.13 5.6 Influence on water intended for human consumption 13 5.7 Reprocessable and recycable material.14 Annex ABibliography18 2 DIN EN ISO 15877-1:2011-03 EN ISO 15877-1:2009 + A1:2010 (E) (normati

24、ve) Test method for the verification of the malfunction temperature, Tmal, of PVC-C, Type-I material103Foreword to EN ISO 15877-1:2009 This document (EN ISO 15877-1:2009) has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems”, the secretariat of which is he

25、ld by NEN, in collaboration with Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, a

26、nd conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.

27、This document supersedes EN ISO 15877-1:2003. This part of ISO 15877 is part of a System Standard for plastics piping systems of a particular material for a specified application. There are a number of such System Standards. The System Standards are consistent with general standards on functional re

28、quirements and recommended practices for installation. This second edition cancels and replaces the first edition (ISO 15877-1:2003). 1) Part 1: General Part 2: Pipes Part 3: Fittings Part 5: Fitness for purpose of the system Part 7: Guidance for the assessment of conformity Technical Specification

29、At the date of publication of this part of ISO 15877, System Standards Series for piping systems of other plastics materials used for the same application are the following: ISO 15874 (all parts), Plastics piping systems for hot and cold water installations Polypropylene (PP) ISO 15875 (all parts),

30、Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) ISO 15876 (all parts), Plastics piping systems for hot and cold water installations Polybutylene (PB) ISO 22391:2)(all parts), Plastics piping systems for hot and cold water installations Polyethylene of rai

31、sed temperature resistance (PE-RT) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

32、 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 1) This System Standard does not incorporate a Part 4: Ancillary equipment or a Part 6: Guidance for install

33、ation. For ancillary equipment, separate standards can apply. Guidance for installation of plastics piping systems made from different materials, intended to be used for hot and cold water installations, is covered by ENV 12108 3. 2) To be published. (Revisions of ISO 22391-1:2007, ISO 22391-2:2007,

34、 ISO 22391-3:2007, ISO 22391-5:2007.) DIN EN ISO 15877-1:2011-03 EN ISO 15877-1:2009 + A1:2010 (E) ISO 15877 consists of the following parts , under the general title Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C): 4 !Foreword to EN ISO 15877-1:

35、2009/A1:2010 This document (EN ISO 15877-1:2009/A1:2010) has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transp

36、ort of fluids”. This Amendment to the European Standard EN ISO 15877-1:2009 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the latest by May 2011. Atte

37、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of

38、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roma

39、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.“ DIN EN ISO 15877-1:2011-03 EN ISO 15877-1:2009 + A1:2010 (E) 5Introduction The System Standard, of which this is Part 1, specifies the requirements for a piping system when made from chlorinated poly(vinyl chloride) (PVC-C)

40、. The piping system is intended to be used for hot and cold water installations and for heating system installations. In respect of potential adverse effects on the quality of water intended for human consumption caused by the product covered by ISO 15877, the following are relevant. a) This part of

41、 ISO 15877 provides no information as to whether the product may be used without restriction in any of the Member States of the EU or EFTA. b) It should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteris

42、tics of this product remain in force. When using solvent cement, relevant national safety rules or regulations concerning their use (e.g. protection of workers) are to be observed. Requirements and test methods for components of the piping system are specified in ISO 15877-2 and ISO 15877-3. Charact

43、eristics for fitness for purpose (mainly for joints) are covered in ISO 15877-5. ISO/TS 15877-7 gives guidance for the assessment of conformity. This part of ISO 15877 specifies the general aspects of the plastics piping system. DIN EN ISO 15877-1:2011-03 EN ISO 15877-1:2009 + A1:2010 (E) 6 1 Scope

44、This part of ISO 15877 specifies the general requirements of chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating

45、 systems, under design pressures and temperatures appropriate to the class of application (see Table 1). This part of ISO 15877 covers a range of service conditions (classes of application), design pressures and pipe dimension classes. For values of TD, Tmaxand Tmalin excess of those in Table 1, thi

46、s part of ISO 15877 does not apply. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It also specifies the te

47、st parameters for the test methods referred to in this part of ISO 15877. In conjunction with the other parts of ISO 15877, it is applicable to PVC-C pipes and fittings, their joints and joints with components of other plastics and non-plastics materials intended to be used for hot and cold water in

48、stallations. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 472, Plas

49、tics Vocabulary ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics ISO 1158, Plastics Vinyl chloride homopolymers and copolymers Determination of chlorine content ISO 1183-1, Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method ISO 9080, Plastics piping and ducting systems Determination of the long-term hydrostatic stre