DIN EN ISO 12683-2005 Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683 2004) German version EN ISO 12683 2004《机械镀锌涂层 规范和试验方法》.pdf

《DIN EN ISO 12683-2005 Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683 2004) German version EN ISO 12683 2004《机械镀锌涂层 规范和试验方法》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 12683-2005 Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683 2004) German version EN ISO 12683 2004《机械镀锌涂层 规范和试验方法》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM February 2005DIN EN ISO 12683 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 11 www

2、.din.de www.beuth.de06.05 9631716Continued overleaf.Document comprises 18 pages.Mechanically deposited coatings of zincSpecication and test methods(ISO 12683 : 2004)English version of DIN EN ISO 12683Durch mechanisches Plattieren aufgebrachte Zinkberzge Anforderungen und Prfverfahren (ISO 12683 : 20

3、04)A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 262 to adopt, without alteration, International Standard ISO 12683 as a European Standard.The responsible German body involved in its preparation was the Normenaus

4、schuss Materialprfung (Ma-terials Testing Standards Committee), Technical Committee Schmelztauchberzge.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows:ISO Standard DIN StandardISO 1463 DIN EN ISO 1463ISO 2079 DIN EN ISO 2079ISO 2080 DIN

5、 EN ISO 2080ISO 2177 DIN EN ISO 2177ISO 2178 DIN EN ISO 2178ISO 3497 DIN EN ISO 3497ISO 9220 DIN EN ISO 9220ISO 9227 DIN 50021ISO 10111 DIN EN ISO 10111ISO 10474 DIN EN 10204ICS 25.220.40National Annex NAStandards referred to(and not included in Normative references and Bibliography)DIN 50021 Corros

6、ion testing Spray tests with different sodium chloride solutionsDIN EN ISO 3497 Metallic coatings Measurement of coating thickness X-ray spectrometric methodDIN EN 10204 Inspection documents for metallic productsDIN EN ISO 1463 Metallic and oxide coatings Measurement of coating thickness Microscopic

7、al method (ISO 1463 : 2003)DIN EN ISO 2079 Surface treatment and metallic coatings General classication of terms (ISO 2079 : 1981)DIN EN ISO 2080 Electroplating and related processes Vocabulary (ISO 2080 : 1981)DIN EN ISO 2177 Metallic coatings Measurement of coating thickness Coulometric method by

8、anodic dis-solution (ISO 2177 : 2003)DIN EN ISO 2178 Non-magnetic coatings on magnetic substrates Measurement of coating thickness by the magnetic method (ISO 2178 : 1982)DIN EN ISO 9220 Metallic coatings Measurement of coating thickness with the scanning electron micro-scope method (ISO 9220 : 1988

9、)DIN EN ISO 10111 Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods (ISO 10111 : 2000)Page 2 DIN EN ISO 12683 : 2005-02English versionICS 25.220.40Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for St

10、andardizationComit Europen de NormalisationEuropisches Komitee fr Normung 2004. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members.Ref. No. EN ISO 12683 : 2004 EEN ISO 12683November 2004Mechanically deposited coatings of zincSpecication and test m

11、ethods(ISO 12683 : 2004)Dpts de zinc par voie mca-nique (matoplastie) Spcica-tions et mthodes de contrle (ISO 12683 : 2004)Durch mechanisches Plattieren auf-gebrachte Zinkberzge Anfor-derungen und Prfverfahren (ISO 12683 : 2004)This European Standard was approved by CEN on 2004-06-24.CEN members are

12、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th

13、e Management Centre or to any CEN member.The European Standards exist in three ofcial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notied to the Management Centre has the same status as the

14、ofcial versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Sp

15、ain, Sweden, Switzerland, and the United Kingdom.Page 2 EN ISO 12683 : 20043445555566667777777881010111111111112121213131313141516Page 3 EN ISO 12683 : 2004Page 4 EN ISO 12683 : 2004Page 5 EN ISO 12683 : 2004Page 6 EN ISO 12683 : 2004Page 7 EN ISO 12683 : 2004Page 8 EN ISO 12683 : 2004Page 9 EN ISO 12683 : 2004Page 10 EN ISO 12683 : 2004Page 11 EN ISO 12683 : 2004Page 12 EN ISO 12683 : 2004Page 13 EN ISO 12683 : 2004Page 14 EN ISO 12683 : 2004Page 15 EN ISO 12683 : 2004Page 16 EN ISO 12683 : 2004