DIN EN 16811-2-2016 Winter service equipment and products - De-icing agents - Part 2 Calcium chloride and Magnesium chloride - Requirements and test methods German version EN 16811.pdf

《DIN EN 16811-2-2016 Winter service equipment and products - De-icing agents - Part 2 Calcium chloride and Magnesium chloride - Requirements and test methods German version EN 16811.pdf》由会员分享，可在线阅读，更多相关《DIN EN 16811-2-2016 Winter service equipment and products - De-icing agents - Part 2 Calcium chloride and Magnesium chloride - Requirements and test methods German version EN 16811.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、October 2016 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.030.40; 71.100.45!%1=“2581426

2、www.din.deDIN EN 16811-2Winter service equipment and products Deicing agents Part 2: Calcium chloride and Magnesium chloride Requirements and test methods;English version EN 168112:2016,English translation of DIN EN 16811-2:2016-10Winterdienstausrstung Enteisungsmittel Teil 2: Calcium und Magnesiumc

3、hlorid Anforderungen und Prfverfahren;Englische Fassung EN 168112:2016,Englische bersetzung von DIN EN 16811-2:2016-10Matriels de viabilit hivernale Fondants routiers Partie 2 : Chlorure de calcium et chlorure de magnsium Exigences et mthodes dessai;Version anglaise EN 168112:2016,Traduction anglais

4、e de DIN EN 16811-2:2016-10www.beuth.deDocument comprises 33 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.10.16 DIN EN 16811-2:2016-10 2 A comma is used as the decimal marker. National foreword This document (EN 16811-2:2016

5、) has been prepared by Technical Committee CEN/TC 337 “Road operation equipment and products”, Working Group WG 1 “Winter service equipment and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Kommunale Technik (DIN Standards Comm

6、ittee Municipal Services), Working Committee NA 051-03-02 AA Maschinen fr den Straenbetriebsdienst (Spiegelgremium fr CEN/TC 151/WG 16 und CEN/TC 337). The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 565 DIN ISO 565 National Annex NA (info

7、rmative) Bibliography DIN ISO 565, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16811-2 August 2016 ICS 13.030.40; 71.100.45 English Version Winter service equipment and products - De-icing

8、 agents -Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods Matriels de viabilit hivernale - Fondants routiers - Partie 2 : Chlorure de calcium et chlorure de magnsium - Exigences et mthodes dessai Winterdienstausrstung - Enteisungsmittel - Teil 2: Calcium- und Magnesium

9、chlorid - Anforderungen und Prfverfahren This European Standard was approved by CEN on 15 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U

10、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

11、slation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla

12、nd, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION

13、 COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16811-2:2016 EEN 16811-2:2016 (E) 2 Contents Page

14、European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 Requirements for calcium chloride and magnesium chloride . 7 4.1 Chemical requirements . 7 4.1.1 Calcium chloride 7 4.1.2 Magnesium chloride . 8 4.2 Sieve analysis 8 4.2.1 Calcium chloride 8 4.2.2 M

15、agnesium chloride . 9 4.3 General requirements . 9 4.4 Packaging and marking . 10 4.5 Material safety data sheet and product description 11 5 Requirements for solutions of calcium chloride and magnesium chloride 11 5.1 Chemical Requirements . 11 5.1.1 Calcium chloride . 11 5.1.2 Magnesium chloride 1

16、1 5.2 General requirements 12 5.3 Marking, material safety data sheet and product description 13 6 Requirements for blends of calcium chloride and magnesium chloride with sodium chloride and/or potassium chloride . 13 6.1 General . 13 6.2 Chemical requirements 13 6.2.1 General . 13 6.2.2 Solid blend

17、s 13 6.2.3 Liquid blends . 13 6.3 Sieve analysis . 14 6.4 General Requirements . 14 6.5 Packaging, marking, material safety data sheet and product description 14 7 Sampling 14 8 Test methods . 15 8.1 General . 15 8.2 Calcium chloride . 15 8.3 Magnesium chloride 15 8.4 Other chlorides . 15 8.4.1 Othe

18、r chlorides (magnesium chloride, potassium chloride, sodium chloride) in calcium chloride . 15 8.4.2 Other chlorides (calcium chloride, potassium chloride, sodium chloride) in magnesium chloride 15 8.5 Sodium chloride 16 8.6 Potassium chloride 16 DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 3 8.7 Sulfa

19、te . 16 8.8 Water insoluble matter 16 8.9 Sieve analysis . 16 8.10 Heavy metals 16 8.11 Hydrocarbons 16 8.12 Total organic carbon (TOC). 16 8.13 pH . 17 8.14 Bulk density 17 8.15 Density 17 Annex A (normative) Product descriptions . 18 A.1 Product description for calcium chloride 18 A.2 Product desc

20、ription for magnesium chloride 20 A.3 Product description for blends of calcium chloride and magnesium chloride with sodium chloride and/or potassium chloride 23 Annex B (normative) Sampling . 26 B.1 Solid form 26 B.1.1 Package shipments . 26 B.1.2 Bulk shipments 26 B.2 Liquid form . 26 B.3 Labellin

21、g and distribution of samples 26 B.4 Sampling report 27 Annex C (normative) Analytical methods Determination of calcium chloride by complexometry 28 C.1 Scope . 28 C.2 Principle . 28 C.3 Reagents . 28 C.4 Apparatus 29 C.5 Procedure 29 C.5.1 Solid samples 29 C.5.2 Liquid samples . 29 C.5.3 Titration

22、. 29 C.6 Calculation. 30 Bibliography . 31 DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 4 European foreword This document (EN 16811-2:2016) has been prepared by Technical Committee CEN/TC 337 “Road operation equipment and products”, the secretariat of which is held by AFNOR. This European Standard shal

23、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this do

24、cument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. EN 16811, Winter service equipment and products De-icing agents, is currently composed with the following parts: Part 1: Sodium chloride Requirements and test m

25、ethods; Part 2: Calcium chloride and Magnesium chloride Requirements and test methods; Part 3: Other solid and liquid de-icing agents Requirements and test methods CEN/TS. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to

26、implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Rom

27、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 5 Introduction De-icing agents are important for the winter maintenance of roads. They can prevent and, in addition to it, eliminate slippery conditions. The standard descri

28、bes the requirements for de-icing agents and their testing methods. The requirements are different for using, storage and type of distribution (spreading and spraying). These need different properties. The aim of this standard is an easy description of the product specifications for tenders and othe

29、r purchasing procedures. DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 6 1 Scope This European Standard specifies the essential requirements of calcium chloride and magnesium chloride for spreading on roads for winter maintenance and includes tests of these requirements. The requirements are specified f

30、or calcium chloride and magnesium chloride in solid form and in water solution, which is delivered to the customer. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only t

31、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 932-1, Tests for general properties of aggregates Part 1: Methods for sampling EN 1235, Solid fertilizers Test sieving (ISO 8397:1988 modified) EN 1236, Fertilizers

32、Determination of bulk density (loose) (ISO 3944:1992 modified) EN 1484, Water analysis Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) EN 14016-2, Binders for magnesite screeds Caustic magnesia and magnesium chloride Part 2: Test methods EN 15144, Wi

33、nter maintenance equipment Terminology Terms for winter maintenance EN 16198, Fertilizers Determination of magnesium by complexometry EN 16811-1, Winter service equipment and products De-icing agents Part 1: Sodium chloride Requirements and test methods EN ISO 3696, Water for analytical laboratory u

34、se Specification and test methods (ISO 3696) EN ISO 9377-2, Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2) EN ISO 10523, Water quality Determination of pH (ISO 10523) EN ISO 11885, Water quality Determination of select

35、ed elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885) EN ISO 12846, Water quality Determination of mercury Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846) ISO 565, Test sieves Metal wire cloth, perforated metal plate a

36、nd electroformed sheet Nominal sizes of openings ISO 649-2, Laboratory glassware Density hydrometers for general purposes Part 2: Test methods and use ISO 758, Liquid chemical products for industrial use Determination of density at 20 degrees C DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 7 ISO 2479, S

37、odium chloride for industrial use Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations ISO 2480, Sodium chloride for industrial use Determination of sulphate content Barium sulphate gravimetric method ISO 2591-1, Test sieving Part 1: M

38、ethods using test sieves of woven wire cloth and perforated metal plate ISO 6227, Chemical products for industrial use General method for determination of chloride ions Potentiometric method 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15144 and th

39、e following apply. 3.1 calcium chloride CaCl2substance which is produced from calcium carbonate and hydrochloric acid, as by-product of the synthetic soda ash process, and as by-product of magnesium oxide production Note 1 to entry: It can also result from flue gas cleaning (e.g. waste incinerators)

40、. It is available in varying concentrations, as flakes with crystal water (calcium chloride dihydrate), and as anhydrous solid like pellets, prills or granules. For the application in winter maintenance the calcium chloride is also used as water solutions in varying concentrations. 3.2 magnesium chl

41、oride MgCl2substance which is produced from natural underground deposits, from salt lakes, from natural brines, from sea water and as by-product of potassium chloride and potassium sulphate production Note 1 to entry: It is available as flakes, prills, or pellets with crystal water (magnesium chlori

42、de hexahydrate). For the application in winter maintenance the magnesium chloride is also used as water solutions in varying concentrations. 3.3 multi-chloride blends solid or liquid blends, respectively multi-chloride brines of calcium chloride and magnesium chloride with sodium and/or potassium ch

43、loride Note 1 to entry: Such blends are produced by mixing or as by-product from potash production. 4 Requirements for calcium chloride and magnesium chloride 4.1 Chemical requirements 4.1.1 Calcium chloride The product shall conform to the requirements specified in Table 1. DIN EN 16811-2:2016-10EN

44、 16811-2:2016 (E) 8 Table 1 Chemical requirements for calcium chloride Parameter Limit Weight % Flakes Pellets, prills, granules Calcium chloride Min. 75 Min. 94 Other chlorides (magnesium chloride, potassium chloride, sodium chloride) Max. 5 Sulfate Max. 0,5 Water insoluble matter Max. 0,5 NOTE 1 O

45、ther chlorides and sulfate are expressed as percentage in the anhydrous product. NOTE 2 Other chlorides expressed as NaCl. 4.1.2 Magnesium chloride The product shall conform to the requirements specified in Table 2. Table 2 Chemical requirements for magnesium chloride Parameter Limit Weight % Flakes

46、, prills, pellets Magnesium chloride Min. 46,5 Other chlorides (calcium chloride, potassium chloride, sodium chloride) Max. 5 Sulfate Max. 1,5 Water insoluble matter Max. 0,5 NOTE 1 Other chlorides and sulfate are expressed as percentage in the anhydrous product. NOTE 2 Other chlorides expressed as

47、NaCl. 4.2 Sieve analysis 4.2.1 Calcium chloride The product shall conform to the requirements specified in Table 3. DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 9 Table 3 Sieve analysis for calcium chloride Sieve size Weight % passing test sieve Flakes Pellets, prills, granules 20 mm 100 - 10 mm Min. 9

48、5 100 5 mm 80 - 100 80 - 100 2 mm Max. 40 0 - 20 0,8 mm 0 - 10 0 - 5 4.2.2 Magnesium chloride The product shall conform to the requirements specified in Table 4. Table 4 Sieve analysis for magnesium chloride Sieve size Weight % passing test sieve Flakes Pellets, prills 20 mm 100 - 10 mm Min. 95 100

49、5 mm Max. 90 80 - 100 2 mm Max. 25 0 - 20 0,8 mm 0 - 10 0 - 5 4.3 General requirements The product shall conform to the requirements specified in Table 5. DIN EN 16811-2:2016-10EN 16811-2:2016 (E) 10 Table 5 General requirements for calcium chloride and magnesium chloride Parameter Limit Unit pH of 10 weight % solution between 5 and 11 Al (Aluminium) As (Arsenic) Cd (Cadmium)