DIN EN 13592-2017 Plastics sacks for household waste collection - Types requirements and test methods German version EN 13592 2017《家用废弃物收集用塑料袋 类型、要求和试验方法 德文版本EN 13592-2017》.pdf

《DIN EN 13592-2017 Plastics sacks for household waste collection - Types requirements and test methods German version EN 13592 2017《家用废弃物收集用塑料袋 类型、要求和试验方法 德文版本EN 13592-2017》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13592-2017 Plastics sacks for household waste collection - Types requirements and test methods German version EN 13592 2017《家用废弃物收集用塑料袋 类型、要求和试验方法 德文版本EN 13592-2017》.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、May 2017 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 55.080!%dd“2659665www.din.deDIN EN 1

2、3592Plastics sacks for household waste collection Types, requirements and test methods;English version EN 13592:2017,English translation of DIN EN 13592:2017-05Kunststoffscke fr die Abfallsammlung aus Haushalten Typen, Anforderungen und Prfverfahren;Englische Fassung EN 13592:2017,Englische bersetzu

3、ng von DIN EN 13592:2017-05Sacs en plastique pour la collecte des dchets mnagers Types, exigences et mthodes dessai;Version anglaise EN 13592:2017,Traduction anglaise de DIN EN 13592:2017-05SupersedesDIN EN 13592:200809www.beuth.deDocument comprises 37 pagesDTranslation by DIN-Sprachendienst.In case

4、 of doubt, the German-language original shall be considered authoritative.04.17 DIN EN 13592:2017-05 2 A comma is used as the decimal marker. National foreword This document (EN 13592:2017) has been prepared by Technical Committee CEN/TC 261 “Packaging” (Secretariat: AFNOR, France). The responsible

5、German body is Working Committee NA 115-02-01 AA “Flexible packaging plastic and laminated films, bags, pouches, carrier bags” of DIN-Normenausschuss Verpackungswesen (DIN Standards Committee Packaging). Amendments This standard differs from DIN EN 13592:2008-09 as follows: a) Clause 1 “Scope” has b

6、een rendered more precise; b) terms and definitions have been adapted and updated; c) the designation for biodegradable and compostable sacks has been extended; d) the structure of the standard has been amended; e) Clause 8 on requirements for and testing of biodegradable and compostable sacks has b

7、een included; f) Annex B on sampling of biodegradable and compostable sacks has been updated. Previous editions DIN 55465: 1976-08 DIN 55465-1: 1989-04 DIN EN 13592: 2003-07, 2007-10, 2008-09 DIN EN 13592 Corrigendum 1: 2005-10 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13592 February 2017

8、 ICS 55.080 Supersedes EN 13592:2003+A1:2007English Version Plastics sacks for household waste collection - Types, requirements and test methods Sacs en plastique pour la collecte des dchets mnagers - Types, exigences et mthodes dessai Kunststoffscke fr die Abfallsammlung aus Haushalten - Typen, Anf

9、orderungen und PrfverfahrenThis European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date l

10、ists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und

11、er the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former

12、Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C

13、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13592:2017 EEN 13592:2017 (E) 2 Contents Page Europe

14、an foreword . 3 1 Scope . 4 2 Normative references 4 3 Terms and definitions . 5 4 Designation . 6 5 Dimensions . 7 6 General . 7 7 Sacks for the collection of household waste, except for the separate collection of biodegradable waste for organic recycling 8 8 Sacks for the separate collection of bi

15、odegradable waste for organic recycling . 20 Annex A (informative) Types of sacks 27 Annex B (normative) Sampling . 28 Annex C (informative) Template for reporting test results 30 Annex D (informative) Typical characteristics of biodegradable/compostable films for caddy liners . 34 Bibliography . 35

16、 DIN EN 13592:2017-05 EN 13592:2017 (E) 3 European foreword This document (EN 13592:2017) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an i

17、dentical text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible f

18、or identifying any or all such patent rights. This document supersedes EN 13592:2003+A1:2007. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,

19、 Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the U

20、nited Kingdom. DIN EN 13592:2017-05 EN 13592:2017 (E) 4 1 Scope This European Standard specifies the general characteristics, test methods and requirements for sacks, bags and bin liners, made from plastic films, used for household waste collection, or household selective waste collection including

21、the collection of biodegradable waste for organic recycling (biodegradation and composting). For the purpose of this European Standard biodegradable and compostable sacks, including ties if any, are those which comply with EN 13432. This European Standard applies only to sacks, bags and bin liners f

22、or which the first use is for household waste collection or household selective waste collection. This European Standard does not apply to sacks used to protect bins and that are not lifted at the emptying operation and thus do not require the same mechanical characteristics. NOTE For editorial reas

23、ons, in this document the terms “sack” and “bag” are synonymous. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, t

24、he latest edition of the referenced document (including any amendments) applies. EN 13432, Packaging Requirements for packaging recoverable through composting and biodegradation Test scheme and evaluation criteria for the final acceptance of packaging EN 22248, Packaging Complete, filled transport p

25、ackages Vertical impact test by dropping (ISO 2248) EN ISO 291, Plastics Standard atmospheres for conditioning and testing (ISO 291) EN ISO 527-1, Plastics Determination of tensile properties Part 1: General principles (ISO 527-1) EN ISO 527-3, Plastics Determination of tensile properties Part 3: Te

26、st conditions for films and sheets (ISO 527-3) EN ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1) EN ISO 7965-2, Sacks Drop test Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2) ISO 4591:1992, Plastics Film and

27、sheeting Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) ISO 4593, Plastics Film and sheeting Determination of thickness by mechanical scanning DIN EN 13592:2017-05 EN 13592:2017 (E) 5 3 Terms and definition

28、s For the purposes of this document, the following terms and definitions apply. 3.1 household waste non dangerous waste from household or from industrial activities or service activities, collected in the same conditions Note 1 to entry: To prevent damage to the sacks, unwrapped broken glass and unw

29、rapped items with sharp edges are not normally placed in them. 3.2 selective waste collection SWC collection of some flows of waste, separated beforehand by producers with the view of valorisation or specific treatment 3.3 standard sack open mouthed sack 3.4 drawtight sack sack with a tie inserted i

30、n its top, allowing it to be closed and, in some cases, be carried 3.5 four flaps sack sack with four flaps used for closure by knotting 3.6 strapsack sack with two or four unsealed straps that can be used as tie for closure and as handles to carry it 3.7 T-shirt sack sack with sealed handles 3.8 st

31、ar sealed sack sack folded before sealing in addition to gusset folds 3.9 gusset fold or series of folds inserted in the longitudinal edge or in the bottom of a sack 3.10 tie any item incorporated by design or added, used to close a sack Note 1 to entry: For example: tapes, clips and wire ties. DIN

32、EN 13592:2017-05 EN 13592:2017 (E) 6 3.11 useful length L distance from the bottom to the mouth of a sack, measured inside the sack lying flat Note 1 to entry: It is expressed in millimetres (mm). 3.12 useful width P internal width of a sack, measured with gussets unfolded, if any Note 1 to entry: I

33、t is expressed in millimetres (mm). 3.13 nominal thickness Ntthickness of the film constituting a sack, as declared by the manufacturer or agreed upon in a contract Note 1 to entry: It is expressed in micrometres (m). Note 2 to entry: nominal thickness is not the only parameter impacting the perform

34、ance of the sacks 3.14 longitudinal direction MD direction parallel to the extrusion machine direction of the film 3.15 transverse direction TD direction perpendicular to the extrusion machine direction of the film 4 Designation Sacks are designated using the following information: a) use, i.e. hous

35、ehold waste collection sacks, household waste selective collection sacks, specific test loads (if any) and, any other information if there is an agreement between the supplier and customer; b) the dimensions, in millimetres (mm) (see Clause 5); c) the type: 1) standard sacks; 2) drawtight sacks; 3)

36、T-shirt sacks; 4) strap sacks; 5) four flap sacks; 6) star sealed sacks. NOTE The above list of types of sacks is neither restrictive nor exhaustive. DIN EN 13592:2017-05 EN 13592:2017 (E) 7 d) the abbreviated term of the plastic material from which the sack is made of, in accordance with EN ISO 104

37、3-1, and the colour of the sack; Colour is a basic information for the designation of a sack, e.g. black, blue, green, white. When no pigment, filler or coloured master batch is incorporated in the resin, it is designated as “neutral”. When a more accurate definition of colour is needed, it should b

38、e specified in the contract with a reference to the relevant specification or standard. e) the nominal thickness of the film, Nt, in micrometres (m); f) a reference to this European Standard, i.e. EN 13592; g) a reference to EN 13432, for sacks for the separate collection of biodegradable waste for

39、organic recycling (biodegradation and composting). EXAMPLES OF DESIGNATION EXAMPLE 1 Household waste collection sack, 700 mm x 1 100 mm, standard, in polyethylene, white, 40 m thick: “Household waste collection sack EN 13592 700/1100 - Standard - PE - White 40 m” EXAMPLE 2 Household selective waste

40、collection drawtight sack, 600 mm x 800 mm, in polyethylene, neutral, 30 m thick for specific load of 4 kg both for drop test and closing device test: “Household selective waste collection sack for 4 kg EN 13592 600/800 - Drawtight - PE - Neutral 30 m “ EXAMPLE 3 Organic waste collection with biodeg

41、radable and compostable sacks, 500 x 600 mm, standard, neutral 20 m: “Biodegradable and compostable sack EN 13592 EN 13432 500/600 - Standard - Neutral 20 m” 5 Dimensions The dimensions of the sacks shall be agreed between the supplier and the customer, unless otherwise specified in this standard. T

42、he dimensions of sacks are given by two separate numbers, the first number giving the useful width, P, in millimetres, (see 3.12) and the second number the useful length, L, in millimetres (see 3.11). EXAMPLE Reference 500x700 (500/700) for a sack with P = 500 mm and L = 700 mm. 6 General Clause 7 g

43、ives the requirements for sacks for the collection of household waste except for the separate collection of biodegradable waste for organic recycling (biodegradation and composting) and the corresponding test methods. In order to take into account the specificities of biodegradable waste and organic

44、 recycling, Clause 8 gives the requirements for sacks for the separate collection of biodegradable waste for organic recycling (biodegradation and composting). The corresponding test methods are given either in 7.2 when they are identical to those for sacks covered in Clause 7 or in 8.2 for the spec

45、ific test methods or any deviation from the test methods given in 7.2. Sampling shall be performed according to Annex B. DIN EN 13592:2017-05 EN 13592:2017 (E) 8 7 Sacks for the collection of household waste, except for the separate collection of biodegradable waste for organic recycling 7.1 Require

46、ments 7.1.1 Sampling The number of sacks for each test is specified in Table B.1. 7.1.2 Useful width and useful length The minimum useful width, measured on the sack, shall not be less than the minimum value: P-2,5 % or P-10 mm The minimum useful length, measured on the sack, shall not be less than

47、the minimum value: L-2,5 % or L-10 mm No defective sacks shall be permitted out of 10 sacks when tested according to 7.2.2.2 and 7.2.2.3. 7.1.3 Film thickness 7.1.3.1 General When tested according to 7.2.3, each sack shall satisfy the requirements for the individual values specified in 7.1.3.2 and f

48、or the average values specified in 7.1.3.3. 7.1.3.2 Individual values No individual value of the film thickness measured in micrometres (m) shall be less than: Nt x where x is the minimum value of: ttNN+2515or 0,35Nt, rounded to the nearest upper or lower unit, in micrometres (m) (e.g. 1,4 as 1 m; 1

49、,5 as 2 m; 1,6 as 2 m) 7.1.3.3 Average values The arithmetic average value of the film thickness, calculated according to either 7.2.3.2 or 7.2.3.3, shall be: a) Nt5 %, when Nt 20 m; b) Nt8 %, when Nt 20 m. 7.1.4 Opacity 7.1.4.1 General Unless otherwise specified, the individual and average values of the opacity shall be in accordance with 7.1.4.2 and 7.1.4.3. No defective sack shall be permitted out of 10 sacks