DIN 17565-2004 Ferro-Chromium Ferro-Chromium-Silicon and Chromium - Technical delivery conditions《铬铁、硅铬铁和铬 交货技术条件》.pdf

《DIN 17565-2004 Ferro-Chromium Ferro-Chromium-Silicon and Chromium - Technical delivery conditions《铬铁、硅铬铁和铬 交货技术条件》.pdf》由会员分享，可在线阅读，更多相关《DIN 17565-2004 Ferro-Chromium Ferro-Chromium-Silicon and Chromium - Technical delivery conditions《铬铁、硅铬铁和铬 交货技术条件》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、DEUTSCHE NORM February 200417565Document comprises 4 pages. No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Chromium

2、, ferrochromium and ferrosilicochromiumTechnical delivery conditionsTranslation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.ICS 77.100Ferrochrom, Ferrochrom-Silicium und Chrom Technische LieferbedingungenIn keeping with current p

3、ractice in standards published by the International Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.ForewordThis standard has been prepared by the Normenausschuss Nichteisenmetalle (Nonferrous Metals StandardsCommittee), Technical Committee Ferrolegierun

4、gen.AmendmentsThis standard differs from DIN 17565, December 1968 edition, and DIN 17599, June 1985 edition, in that ithas been completely revised.Previous editionsDIN 17565: 1968-12; DIN 17599: 1985-06.1 ScopeThis standard specifies requirements for chromium, ferrochromium and ferrosilicochromium a

5、s used forsteelmaking and foundry purposes, and for welding electrodes.2 Normative referenceThis standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the titles of the publications are

6、listedbelow. For dated references, subsequent amendments to or revisions of any of these publications apply tothis standard only when incorporated in it by amendment or revision. For undated references, the latestedition of the publication referred to applies.ISO 31-0 : 1992 Quantities and units Par

7、t 0: General principlesThis standard supersedesDIN 17565, December 1968edition, and, together withDIN 17560-1, DIN 17561 toDIN 17564 and DIN 17566,February 2004 editions,supersedes DIN 17599, June1985 edition.English price group 6www.din.dewww.beuth.de09.04 9572332Page 2DIN 17565 : 2004-023 Designat

8、ion3.1 Standard designationThe designation of chromium, ferrochromium and ferrosilicochromium shall include either the name (symbol)or the material number.EXAMPLE:Designation of ferrochromium of grade FeCr70C10 (material number: 0.4010):Ferrochromium DIN 17565 FeCr70C10orFerrochromium DIN 17565 0.40

9、103.2 Designation for order purposesEXAMPLE:Designation when ordering 5 000 kg of ferrochromium as specified in this standard, of grade FeCr70C10(material number: 0.4010), particle size range (KG) 10 mm to 200 mm:5000 kg ferrochromium DIN 17565 FeCr70C10 KG 10-200or5000 kg ferrochromium DIN 17565 0.

10、4010 KG 10-2004 Requirements4.1 CompositionThe composition of chromium, ferrochromium and ferrosilicochromium shall be as specified in table 1.Page 3DIN 17565 : 2004-02Material Composition, as percentages by massDesignationname number Cr.1)C N P S SiMin. 55 FeCr70C005 0.4000Max. 75 0,05 0,05 0,03 0,

11、01 1,5Min. 75 FeCr90C005 0.4002Max. 95 0,05 0,05 0,03 0,01 1,5Min. 55 FeCr70C010 0.4001Max. 75 0,10 0,05 0,03 0,01 1,5Min. 60 0,03 3,0 FeCr70C010N 0.4003Max. 70 0,10 4,0 0,03 0,01 1,5Min. 60 0,03 4,0 FeCr70C010HN 0.4004Max. 70 0,10 10,0 0,03 0,01 1,5Min. 55 Low carbongradeFeCr70C050 0.4005Max. 75 0,

12、50 0,05 0,03 0,01 1,5Min. 55 0,50 FeCr70C10 0.4010Max. 75 1,0 0,03 0,05 1,5Min. 55 1,0 Medium car-bon gradeFeCr70C20 0.4020Max. 75 2,0 0,03 0,05 1,5Min. 45 6 2FeCr70C80 0.4080Max. 70 8 0,03 0,05 5Min. 65 4 Ferrochro-miumHigh carbongradeFeCr70C95 0.4095Max. 70 9.3) 0,03 0,05 2Min. 28 45High silicongr

13、adeFeSiCr35 0.4031Max. 35 1,5 0,03 0,05 55Min. 35 35Ferrosilico-chromiumLow silicongradeFeSiCr40 0.4037Max. 40 0,10 0,03 0,05 45Min. 99,92) 2)2)2)ElectrolyticgradeCr99el 0.4099Max. 2) 2)2)2)Min. 99 ChromiumAluminother-malCr99 0.4090Max. 0,03 0,02 0,035 0,011) The chromium content shall not vary by m

14、ore than 2 % within a consignment.2) Content to be requested from manufacturer.3) For welding fabrication purposes, the carbon content may be up to 10 %.Table 1: Composition of chromium, ferrochromium and ferrosilicochromiumPage 4DIN 17565 : 2004-024.2 Particle sizeThe particle size range is to be s

15、pecified when ordering. Table 2 gives guideline values, with any other rangesbeing subject to agreement.Table 2: Particle sizes for ferrochromium and ferrosilicochromium4.3 Form suppliedChromium, ferrochromium and ferrosilicochromium may be supplied in lumps up to 300 mm long (commerciallyreferred t

16、o as KG 0-300), or crushed and or screened, in which case the particle size is subject to agreement.The surface of the material shall be free from foreign matter, such as sand, slag, etc.The material shall be free from harmful matter and shall not emit any ionizing radiation (such radiation beingund

17、erstood to be radiation higher than the background radiation at the time of receipt by the customer).5 AnalysisThe method of analysis shall be at the manufacturers discretion, a state-of-the-art procedure being used incases of dispute.When rounding results, the specifications of clause 6 are to be o

18、bserved.6 Rounding of resultsResults as calculated or observed are to be rounded following the rules set out in Annex B of ISO 31-0. The valueis to be rounded in one step to the same number of places as are specified in this standard.The results shall be rounded as follows:a) if the figure following

19、 the last significant place is less than five, then the latter shall remain unchanged;b) if the figure following the last significant place is five or higher, the latter shall be increased by one.7 Marking, labelling, packaging, transport and storageUnless otherwise requested or agreed upon, marking

20、, labelling and packaging shall be at the suppliers discre-tion.Ferrosilicochromium, with or without packaging, shall be transported and stored so as to be protected againstmoisture, in accordance with any relevant regulations.G50G65G72G6DG69G73G73G69G62G6CG65 G75G6EG64G65G72G73G69G7AG65G2C G61G73 G

21、61G70G65G72G63G65G6EG74G61G67G65 G6FG66 G71G75G61G6EG74G69G74G79 G73G75G70G70G6CG69G65G64G50G61G72G74G69G63G6CG65 G73G69G7AG65 G72G61G6EG67G65G2CG69G6E G6DG6DG54G6FG74G61G6CG46G69G6EG65G73 G28G6CG65G73G73G74G68G61G6E G33 G6DG6DG29G50G65G72G6DG69G73G73G69G62G6CG65 G6FG76G65G72G73G69G7AG65G46G72G6FG6D

22、 G31G30 G74G6F G32G30G30 G31G35 G37G46G72G6FG6D G33 G74G6F G35G30 G35G4CG65G73G73 G74G68G61G6E G33 G97 G97G31G30 G25 G28mG2FmG29 G6FG66 G71G75G61G6EG74G69G74G79 G73G75G70G70G6CG69G65G64G2EG57G68G65G72G65 G74G68G65 G6DG61G74G65G72G69G61G6C G69G73 G73G75G70G70G6CG69G65G64 G69G6E G6CG75G6DG70G73G2CG74G

23、68G65 G6DG61G78G69G6DG75G6D G70G61G72G74G69G63G6CG65 G73G69G7AG65 G61G6CG6FG6EG67 G74G77G6F G6FG72G74G68G72G65G65 G64G69G6DG65G6EG73G69G6FG6EG73 G6FG66 G61 G70G69G65G63G65 G73G68G61G6CG6C G6EG6FG74G65G78G63G65G65G64 G31G2CG31G35 G74G69G6DG65G73 G74G68G65 G75G70G70G65G72 G76G61G6CG75G65 G6FG66 G74G68G65G72G61G6EG67G65G2E