CEN TR 16970-2016 Sustainability of construction works - Guidance for the implementation of EN 15804.pdf

《CEN TR 16970-2016 Sustainability of construction works - Guidance for the implementation of EN 15804.pdf》由会员分享，可在线阅读，更多相关《CEN TR 16970-2016 Sustainability of construction works - Guidance for the implementation of EN 15804.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、PD CEN/TR 16970:2016Sustainability of constructionworks Guidance for theimplementation of EN 15804BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06PD CEN/TR 16970:2016 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TR16970:2

2、016.The UK participation in its preparation was entrusted to TechnicalCommittee B/558, Sustainability of construction works.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a c

3、ontract. Users are responsible for its correctapplication. The British Standards Institution 2016 .Published by BSI Standards Limited 2016ISBN 978 0 580 92702 7ICS 91.010.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the

4、 authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dPD CEN/TR 16970:2016TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16970 July 2016 ICS 91.010.99 English Version Sustainability of const

5、ruction works - Guidance for the implementation of EN 15804 Contribution des ouvrages de construction au dveloppement durable - Lignes directrices pour la mise en application de lEN 15804 Nachhaltiges Bauen - Leitfaden fr die Anwendung von EN 15804 This Technical Report was approved by CEN on 11 Apr

6、il 2016. It has been drawn up by the Technical Committee CEN/TC 350. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

7、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Ave

8、nue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 16970:2016 EPD CEN/TR 16970:2016CEN/TR 16970:2016 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3

9、 Terms and definitions . 6 4 Abbreviations . 7 5 General aspects 7 5.1 Objectives . 7 5.1.1 Objectives of core PCR . 7 5.1.2 Objectives of the guidance . 8 5.2 Types of EPD with respect to life cycle stages covered 9 5.2.1 Information Modules . 9 5.2.2 Beyond the product life cycle: information modu

10、le D 10 5.2.3 Scenarios . 10 5.2.4 Types of EPD with respect to applied modules . 10 5.2.5 Default values for indicator results for the use in c-PCR . 10 5.3 Comparability of EPD for construction products . 10 5.4 Additional information 11 5.5 Ownership, responsibility and liability for the EPD 11 5

11、.6 Communication formats 11 6 Product Category Rules for LCA 11 6.1 Product Category 11 6.2 Life cycle stages and their information modules to be included 11 6.2.1 General . 11 6.2.2 A1-A3, Product stage, information modules 11 6.2.3 A4-A5, Construction process stage, information modules 12 6.2.4 B1

12、-B5, Use stage, information modules related to the building fabric . 12 6.2.5 B6-B7, use stage, information modules related to the operation of the building . 12 6.2.6 C1-C4 End-of-life stage, information modules . 12 6.2.7 D, Benefits and loads beyond the system boundary, information module . 15 6.

13、3 Calculation rules for the LCA 15 6.3.1 Functional unit 15 6.3.2 Declared Unit . 15 6.3.3 Reference service life (RSL) 15 6.3.4 System boundaries 15 6.3.5 Criteria for the exclusion of inputs and outputs . 21 6.3.6 Selection of data with regard to average EPD 21 6.3.7 Data quality requirements 22 6

14、.3.8 Developing product level scenarios 22 6.3.9 Units 23 6.4 Inventory analysis . 23 6.4.1 Collecting Data 23 6.4.2 Calculation procedures 23 6.4.3 Allocation of input flows and output emissions 23 6.5 Impact assessment . 24 PD CEN/TR 16970:2016CEN/TR 16970:2016 (E) 3 7 Content of the EPD 24 7.1 De

15、claration of general information . 24 7.2 Declaration of environmental parameters derived from LCA 25 7.2.1 General . 25 7.2.2 Rules for declaring LCA information per module . 25 7.2.3 Parameters describing environmental impacts 25 7.2.4 Parameters describing resource use . 26 7.2.5 Other environmen

16、tal information describing different waste categories and output flows. 27 7.3 Scenarios and additional technical information . 27 7.4 Additional information on release of dangerous substances to indoor air, soil and water during the use stage 27 7.5 Aggregation of information modules . 27 8 Project

17、 report . 27 9 Verification and validity of an EPD . 27 Bibliography . 28 PD CEN/TR 16970:2016CEN/TR 16970:2016 (E) 4 European foreword This document (CEN/TR 16970:2016) has been prepared by Technical Committee CEN/TC 350 “Sustainability of construction works”, the secretariat of which is held by AF

18、NOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. PD CEN/TR 16970:2016CEN/TR 16970:2016 (E) 5 Introduction This Technical Report is a complementar

19、y document to EN 15804 “Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products”. It is intended to assist the understanding and use of EN 15804 by giving guidance and further explanation. This document does not replace

20、 any of the standards requirements or introduce any new rules and it is not intended to be used as a stand-alone document. This document provides guidance to CEN Technical Committees for construction products and other bodies such as Environmental Product Declaration programme operators in the const

21、ruction sector developing Product Category Rules complementary to EN 15804. According to decision BT 3/2013, CEN Technical Committees for construction products are asked to inform CEN/TC 350 at the earliest stage when a complementary PCR document will be developed, allowing CEN/TC 350 to arrange a l

22、iaison and ensure they can review the document when necessary. PD CEN/TR 16970:2016CEN/TR 16970:2016 (E) 6 1 Scope This Technical Report provides general guidance to the users of EN 15804 and those preparing complementary Product Category Rules (c-PCRs) by: stating general principles for the use of

23、EN 15804 by CEN Technical Committees for construction products (Product TCs) in order to ensure consistency among the complementary PCR produced by Product TCs; addressing the questions raised by Product TCs, manufacturers or their sub-contractors who provide LCA studies underlying an Environmental

24、Product Declaration (EPD) and by EPD programme operators who include c-PCR of specific subcategories in their PCR registry. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references

25、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15804:2012+A1:2013, Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products

26、EN 15978, Sustainability of construction works - Assessment of environmental performance of buildings - Calculation method EN ISO 14025:2010, Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) ISO 15686 (all parts), Buildings and

27、constructed assets Service life planning 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15804:2012+A1:2013 and the following apply. 3.1 complementary product category rules, c-PCR product group specific or horizontal PCR, which provide additional, co

28、mpliant and non-contradictory requirements to EN 15804 Note 1 to entry: c-PCR are meant to be used together with EN 15804. 3.2 default values pre-defined results without further calculation 3.3 freshwater water having a low concentration of dissolved solids Note 1 to entry: Freshwater typically cont

29、ains less than 1 000 mg per litre of dissolved solids and is generally accepted as suitable for withdrawal and conventional treatment to produce potable water. Note 2 to entry: The concentration of total dissolved solids can vary considerably over space and/or time. SOURCE: ISO 14046:2014, 3.1.1 PD

30、CEN/TR 16970:2016CEN/TR 16970:2016 (E) 7 3.4 water use use of water by human activity Note 1 to entry: Use includes, but is not limited to, any water withdrawal, water release or other human activities within the drainage basin impacting water flows and/or quality, including in-stream uses such as f

31、ishing, recreation, transportation. Note 2 to entry: The term “water consumption” is often used to describe water removed from, but not returned to, the same drainage basin. Water consumption can be because of evaporation, transpiration, integration into a product, or release into a different draina

32、ge basin or the sea. Change in evaporation caused by land-use change is considered water consumption (e.g. reservoir). The temporal and geographical coverage of the water footprint assessment are defined in the goal and scope. SOURCE: ISO 14046:2014, 3.2.1, modified 4 Abbreviations ADP Abiotic deple

33、tion potential CF Characterization factor c-PCR Complementary product category rules EPD Environmental product declaration EoW End-of-waste status ETICS External Thermal Insulation Composite Systems GHG Greenhouse gas GWP Global warming potential LCA Life cycle assessment LCI Life cycle inventory LC

34、IA Life cycle impact assessment PCR Product category rules Product TC CEN Technical Committees for construction products (Product TCs), i.e. Technical Committee in CEN responsible for developing harmonized and other standards for product groups RSL Reference service life 5 General aspects 5.1 Object

35、ives 5.1.1 Objectives of core PCR The main objective of EN 15804 is to provide horizontal core PCR for all construction products and services. They are applicable for developing Type III EPD for any construction product or service but can be further detailed in c-PCR. It is possible to develop and t

36、o verify a Type III EPD directly to the EN 15804 standard. If there is no c-PCR available, EPD for construction products are developed only according to EN 15804. The EPD always states according to which standard the EPD was made (EN ISO 14025:2010, 7.2.1, e). PD CEN/TR 16970:2016CEN/TR 16970:2016 (

37、E) 8 5.1.2 Objectives of the guidance If more detailed specifications and descriptions for a product group are needed it is advisable to develop a c-PCR in compliance with EN 15804. The grouping of products follows the grouping of the Product TCs. Compliance with this Technical Report is not a requi

38、rement for compliance with EN 15804, but product TCs and Program Operators are encouraged to follow this guideline to enhance harmonization The guidance document supports the following principles for developing c-PCR: a) Any c-PCR using EN 15804 as a normative reference needs to be compliant with EN

39、 15804. NOTE 1 CEN/TC 350 homepage 1 lists c-PCR documents prepared by Product TCs, that were reviewed to be compliant with EN 15804, or are under review by CEN TC 350/WG 3. b) A common structure of EN 15804 and cPCR provided by Product TCs in order to assist the development of a consistent set of p

40、rinciples and rules for the construction sector. 1) C-PCR developed by Product TCs use the following common title structure: “title of Product TC - Environmental product declarations Product category rules complementary to EN 15804 product group, depending on name” EXAMPLE Round and sawn timber - En

41、vironmental product declarations - Product category rules complementary to EN 15804 for wood and wood-based products for use in construction. 2) The structure of the document maintains the structure of EN 15804. When developing c-PCR Product TCs are recommended to use a format as described in Table

42、1. Table 1 Format for the development of complementary PCR in accordance with EN 15804 Clause Text for new c-PCR EN 15804 Comment 5 general aspects, 5.1 Objective of the PCR As in EN 15804, in addition: xxxxxxxx An EPD according to this standard provides quantified environmental information for a co

43、nstruction product or service. c) C-PCR provided by Product TCs and considered compliant with EN 15804 by CEN/TC 350 provide a consistent set of principles and rules. In the development of c- PCR the following aspects are considered: 1) Complementary specifications to the core rules provided by EN 1

44、5804, particularly related to: i) the scope of the c-PCR, related to the product group, product type, intended application and use of the product, type of EPD (cradle to gate, cradle to gate with options, cradle to grave); ii) the scope with respect to any required information modules A1-C4 and D; i

45、ii) specification of the declared or functional unit; iv) allocation rules; PD CEN/TR 16970:2016CEN/TR 16970:2016 (E) 9 v) system boundary setting; vi) application of the rules for the exclusion of inputs and outputs. 2) Guidance for the life cycle inventory specifically related to the product group

46、 and/or product type for the information modules covered by the type of EPD. 3) Selection of information modules for which more specific requirements and guidance are given. 4) Inclusion of default scenarios related to a specific application of the product including guidance on: i) the specific cont

47、ent of all information modules of the life cycle and information module D, for default scenarios (e.g. use, typical waste processing, for energy recovery, recycling and reuse and disposal); ii) the definition of the end-of-waste status; iii) the technical scenario information for all information mod

48、ules of the product system and information module D; iv) the determination of the RSL and related in-use conditions for a specific application of the product. The following aspects are not part of c-PCR: 5) classes, benchmarks or threshold values for the indicators; 6) new indicators as part of the

49、EN 15804 implementation. NOTE 2 New indicators as part of the pre-set basket of indicators are developed in a horizontal standardization process. NOTE 3 Additional LCA based indicators required or permitted by a c-PCR are communicated as additional information. 5.2 Types of EPD with respect to life cycle stages covered 5.2.1 Information Modules In order to structure the sustainability assessment of buildings and to organize the use of data from products for such an assessment, the life cycle of a product and the life cycle of a building are