BS ISO TR 11762-1996 Light-gauge metal containers - Round open-top cans for liquid products with added gas - Classification of can sizes by construction type《薄壁金属容器 用于充气液体产品的顶开圆罐 按.pdf

《BS ISO TR 11762-1996 Light-gauge metal containers - Round open-top cans for liquid products with added gas - Classification of can sizes by construction type《薄壁金属容器 用于充气液体产品的顶开圆罐 按.pdf》由会员分享，可在线阅读，更多相关《BS ISO TR 11762-1996 Light-gauge metal containers - Round open-top cans for liquid products with added gas - Classification of can sizes by construction type《薄壁金属容器 用于充气液体产品的顶开圆罐 按.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO TR 11762:1992 Implementation of ISO TR 11762:1992 Light-gauge metal containers Round open-top cans for liquid products with added gas Classification of can sizes by construction type UDC 621.798.1:672.46.001.33:663.64 + .86BSISO TR 11762:1992 This British Standard, having bee

2、n prepared under the directionof the Consumer Products and Services Sector Board, was published under theauthority of the Standards Board and comes into effect on 15 January 1996 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference PKW/2 Draft announced i

3、n BSI News June 1995 ISBN 0 580 25192 6 Committees responsible for this BritishStandard The preparation of this British Standard was entrusted to Technical Committee PKW/2, Primary packaging, upon which the following bodies wererepresented: Association of the British Pharmaceutical Industry British

4、Aerosol Manufacturers Association British Fibreboard Packaging Association British Glass Manufacturers Confederation British Plastics Federation British Retail Consortium Chemical Industries Association Cosmetic, Toiletry and Perfumery Association Limited Department of Trade and Industry (Consumer S

5、afety Unit, CA Division) Department of Trade and Industry (Laboratory of the Government Chemist) Environmental and Technical Association for the Paper Sack Industry Flexible Packaging Association Institute of Packaging Institute of Trading Standards Administration Institute of Wastes Management Meta

6、l Packaging Manufacturers Association Packaging and Industrial Films Association Paper Federation of Great Britain Pira International The following bodies were also represented in the drafting of the standard, through subcommittees and panels: British Coatings Federation Ltd. British Compressed Gase

7、s Association Consumer Policy Committee of BSI Engineering Equipment and Materials Users Association Health and Safety Executive LP Gas Association Society of Cosmetic Scientists Amendments issued since publication Amd. No. Date CommentsBSISO TR 11762:1992 BSI 01-2000 i Contents Page Committees resp

8、onsible Inside front cover National foreword ii Foreword iii Text of ISO/TR 11762 1BSISO TR 11762:1992 ii BSI 01-2000 National foreword This British Standard reproduces verbatim ISO TR 11762:1992 and implements it as the UK national standard. Together with BS ISO 10653, BS ISO 10654, BSISO TR 11761

9、and BS ISO TR 11776, this British Standard supersedes BS6992-1:1988, BS 6992-2:1991, BS 6992-3:1988, BS 6992-4:1989 and BS 6992-5:1988, which are withdrawn. This British Standard is published under the direction of the Consumer Products and Services Sector Board whose Technical Committee PKW/2 has t

10、he responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternat

11、ional and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct appli

12、cation. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO TR title page, pages ii to iv, pages 1 and 2 and a back cover. This standard has been updated (s

13、ee copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO/TR 11762:1992(E) ii BSI 01-2000 Contents Page Foreword iii 1 Scope 1 2 References 1 3 Opening diameters (mm) 1 4 Classification by can type construction 1 Annex A

14、Reference list 2 Table 1 1 Table 2 1 Table A.1 2ISO/TR 11762:1992(E) BSI 01-2000 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out thr

15、ough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collabo

16、rates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The main task of technical committees is to prepare International Standards, but in exceptional circumstances a technical committee may propose the publication of a Technical Re

17、port of one of the following types: type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts; type 2, when the subject is still under technical development or where for any other reason there is the future but not immediate possi

18、bility of an agreement on an International Standard; type 3, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example). Technical Reports of types 1 and 2 are subject to review within three y

19、ears of publication, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful. ISO/TR 11762, which is a Technical Report of type 3, was prepare

20、d by Technical Committee ISO/TC 52, Light gauge metal containers. It gives, for information, a list of can sizes standardized in ISO 10654 but classified by construction type. NOTEISO 10654 specifies only nominal filling volumes. Together with ISO 10653, ISO 10654, ISO/TR 11761 and ISO/TR 11776, thi

21、s first edition of ISO/TR 11762 cancels and replaces ISO 3004-1:1986, ISO 3004-2:1989, ISO 3004-3:1986, ISO 3004-4:1986, ISO 3004-5:1988 and ISO 3004-6:1986. Annex A of this Technical Report is for information only. It lists the can sizes previously standardized in ISO 3004-3:1986, sub-clause 3.1.iv

22、 blankISO/TR 11762:1992(E) BSI 01-2000 1 1 Scope This Technical Report gives a list of nominal filling volumes for round open top cans presented by construction type. This Technical Report concerns the following containers: straight-sided cans; single necked-in cans; multiple necked-in cans. 2 Refer

23、ences ISO 90-1, Light gauge metal containers Definitions and determination methods for dimensions and capacities Part 1: Open-top cans. ISO 10654, Light gauge metal containers Round open-top cans Cans defined by their nominal filling volumes Cans for liquid products with added gas. 3 Opening diamete

24、rs (mm) Table 1 4 Classification by can type construction Open top cans Round 2 piece, necked-in Table 2 Straight-sided cans Single necked-in cans Multiple necked-in cans 53 50 65 63 65 63 57 Nominal filling volume (ml) Nominal diameter (mm) 250 53, 66 330 66 500ISO/TR 11762:1992(E) 2 BSI 01-2000 An

25、nex A Reference list The following can sizes were standardized in the former ISO 3004-3 Standard (Subclause 3.1) but now these cans do not meet the required criteria to be standardized and incorporated in ISO 10654. Table A.1 Volume Diameter 52 60 63 65 68 73 78 83 99 105 127 153 230 200 X X 250 X 2

26、75 X 296 X 330 355 X X 375 X 473 X 500 X 750 X 1000 XblankBS ISO TR 11762:1992 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the internatio

27、nal level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would

28、 be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating serv

29、ice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for internati

30、onal standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technic

31、al Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive s

32、ubstantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationa

33、l standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does

34、not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.