BS ISO 7634-2007 Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures《道路车辆 压缩空气制动系统 试验程序》.pdf

《BS ISO 7634-2007 Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures《道路车辆 压缩空气制动系统 试验程序》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 7634-2007 Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures《道路车辆 压缩空气制动系统 试验程序》.pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58towed vehicles including those with electronic braking control functions Test proceduresICS 43.040.

2、40Road vehicles Compressed air braking systems for BRITISH STANDARDBS ISO 7634:2007BS ISO 7634:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007ISBN 978 0 580 59129 7Amendments issued since publicationAmd. No. Date Com

3、mentscontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of ISO 7634:2007. It supersedes BS ISO 7634:2003 which is withdra

4、wn.The UK participation in its preparation was entrusted to Technical Committee AUE/11, Braking systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a Reference numberISO

5、 7634:2007(E)INTERNATIONAL STANDARD ISO7634Third edition2007-06-01Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures Vhicules routiers Dispositifs de freinage air comprim pour vhicules remorqus, y compris ceux ave

6、c fonctions de commande de freinage lectroniques Modes opratoires dessai BS ISO 7634:2007ii iiiContents Page Foreword. v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Symbols . 3 5 Test site conditions 7 5.1 Test site . 7 5.2 Road surface condition 7 5.3 Ambient conditions 8 6

7、General requirements. 8 7 Recommended sequence of tests. 9 7.1 Preparation and static checks and tests 9 7.2 Basic performance tests unladen 10 7.3 Antilock braking system/electronically controlled braking system (ABS/EBS) tests unladen 10 7.4 Basic performance tests Laden 10 8 Vehicle preparation.

8、11 8.1 Documents and basic data 11 8.2 Braking system condition and bedding . 11 8.3 Adjustment of braking equipment 11 8.4 Tyre conditions . 12 8.5 Towing vehicles 12 8.6 Instrumentation General 12 8.7 Provision for failure simulation. 12 8.8 Loading condition. 13 8.9 Additional vehicle to tow the

9、combination of normal towing vehicle and test trailer . 13 8.10 Additional instrumentation for ABS equipped trailers . 13 8.11 Additional instrumentation for trailer with an electric control line . 13 9 Energy storage capacity test. 14 9.1 Test conditions . 14 9.2 Test procedure 14 9.3 Test requirem

10、ent. 14 9.4 Presentation of results. 14 10 Service braking system Response time measurement 14 10.1 General. 14 10.2 Towing vehicle simulator. 15 10.3 Test conditions . 15 10.4 Test procedure 15 10.5 Presentation of results. 16 11 Automatic braking 16 12 Brake defect and failure warning signals. 16

11、12.1 Antilock braking system warning signal16 12.2 EBS warning signal check . 16 13 Tests on trailers equipped with spring brake actuators. 16 13.1 Initial conditions . 16 13.2 Energy depletion test . 17 BS ISO 7634:2007iv 13.3 Spring brake actuation test 17 13.4 Auxiliary release system check. 17 1

12、4 Dynamometer tests (alternative to vehicle tests) 17 14.1 General . 17 14.2 Alternative type I tests (fade test for trailers of categories O2and O3) 17 14.3 Alternative type III tests (fade test for category O4trailers). 19 15 Transfer of results of type I or type III tests to other vehicles . 21 1

13、5.1 General . 21 15.2 Presentation of results . 22 16 Control failure of load-sensing device/function Stationary test 23 17 Auxiliary equipment failure 24 18 Basic performance tests Unladen 24 18.1 Type O test (Service braking system cold brake effectiveness) 24 19 Antilock braking system/electronic

14、ally controlled braking system (ABS/EBS) tests Unladen 26 19.1 Determination of adhesion utilization on high adhesion surface 26 19.2 Determination of the peak coefficient of adhesion on the high adhesion surface 27 19.3 Wheel behaviour . 30 19.4 Split adhesion tests 30 19.5 Energy consumption of th

15、e antilock braking system (on a high adhesion surface). 31 19.6 Antilock braking system failure. 33 19.7 Additional tests on trailers equipped with EBS. 33 20 Basic performance tests Laden 34 20.1 Parking braking system tests 34 20.2 Type O test (Service braking system cold brake effectiveness) 37 2

16、0.3 Control failure of load-sensing device/function Road test 37 20.4 Type I test (fade test for trailers of categories O2and O3). 37 20.5 Type III test (fade test for vehicles of category O4). 40 Annex A (normative) Description of test vehicle, axle or brake 44 Annex B (normative) Test report. 47 A

17、nnex C (informative) Figures. 50 Bibliography . 54 BS ISO 7634:2007vForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technica

18、l committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely wit

19、h the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft Inter

20、national Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may

21、 be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 7634 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 2, Braking systems and equipment. This third edition cancels and replaces the second edition (ISO

22、7634:2003), which has been technically revised. BS ISO 7634:2007blank1Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures 1 Scope This International Standard specifies the test procedures for testing the operationa

23、l performance requirements of towed vehicles of Category O (full trailers, semi-trailers, and centre-axle trailers) as defined in Annex 7 of the UN-ECE Consolidated Resolution on the Construction of Vehicles (R. E. 3). This includes vehicles fitted with compressed air braking systems (with and witho

24、ut an antilock braking system or an electronically controlled braking system), in accordance with UN-ECE Regulation No. 13, 09 series of amendments, supplements 1 to 6. Test methods covering lock actuators are not included. The values in square brackets and the values in the tables are taken from EC

25、E Regulation No. 13 for information. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments

26、) applies. ISO 611, Road vehicles Braking of automotive vehicles and their trailers Vocabulary ISO 1176, Road vehicles Masses Vocabulary and codes ISO 3583, Road vehicles Pressure test connection for compressed-air pneumatic braking equipment ISO 3833, Road vehicles Types Terms and definitions ISO 7

27、638-1, Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage ISO 7638-2, Road vehicles Connectors for the electrical connection of towing and towed vehicles Part 2: Conn

28、ectors for braking systems and running gear of vehicles with 12 V nominal supply voltage ISO 11992 (all parts), Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles ISO/PAS 12158, Road vehicles Braking systems Temperature measuring methods UN-E

29、CE Regulation No. 13, Uniform provisions concerning the approval of vehicles with regard to braking. NOTE Regulation 13 is periodically updated through amendments and supplements, with this standard having been prepared in accordance with the 09 series of amendments including supplements 1 to 6. Whe

30、n using this standard care should be taken to ensure that changes have not subsequently occurred that effect the test methods or values given. BS ISO 7634:20072 3 Terms and definitions For the purposes of this International Standard, the terms and definitions given in ISO 611, ISO 1176 and ISO 3833

31、and the following apply. 3.1 pneumatic (full air) braking system braking system in which the control and energy are transmitted from the point of application to the brakes by pneumatic transmission devices NOTE Figures C.1 and C.2 show examples of typical full trailer and semi-trailer air braking sy

32、stems. 3.2 electronic braking system EBS braking system in which the control is generated and processed as an electrical signal in the control transmission NOTE Electrical output signals control devices which produce actuation forces from stored pneumatic energy. 3.3 categories of ABS 3.3.1 Category

33、 A: ABS system which meets all the requirements of UN-ECE Regulation No. 13, Annex 13 3.3.2 Category B: ABS system which meets all the requirements of UN-ECE Regulation No. 13, Annex 13, except paragraph 6.3.2 (no braking rate on split-adhesion surface is prescribed) 3.4 wheel control 3.4.1 directly

34、 controlled wheel wheel whose braking force is modulated according to data provided by at least its own sensor 3.4.2 indirectly controlled wheel wheel whose braking force is modulated according to data provided by the sensor(s) of other wheel(s) NOTE ABS systems with select-high control are deemed t

35、o include both directly and indirectly controlled wheels. In systems with select-low control, all sensed wheels are deemed to be directly controlled wheels. 3.5 ABS full cycling state of the antilock system in which the brake force is repeatedly modulated to prevent the directly controlled wheels fr

36、om locking NOTE Brake applications where modulation only occurs during the stop are not considered to meet this definition. 3.6 laden trailer trailer laden so as to reach its total maximum design mass (ISO 1176 code: ISO-M07) BS ISO 7634:20073NOTE In the case of semi-trailers and centre-axle trailer

37、s being road tested, the loading may be such that the maximum design load per axle (ISO 1176 code: ISO-M11) is reached without loading the fifth wheel for semi-trailers or the mechanical coupling for centre-axle trailers. However, for the testing of the parking braking system (see 20.1) the loading

38、on the fifth wheel or mechanical coupling in the case of semi-trailer and centre-axle trailers is included. 3.7 unladen trailer trailer at its shipping mass (ISO 1176 code: ISO-M05) minus spare wheel(s) and spare wheel carrier(s) and other optional items, plus the mass of the required instrumentatio

39、n (see 8.6, 8.10 and 8.11) 3.8 electric control line electrical connection between an electronic braking system equipped power-driven vehicle and an electronic braking system equipped trailer which provides the braking control function to the trailer NOTE It comprises the electrical wiring and conne

40、ctor and includes the parts for data communication and the electrical energy supply for the trailer control transmission. 4 Symbols For the purposes of this International Standard, the symbols given in Table 1 apply. Table 1 Symbols Symbols UnitaDescription Symbol used in ECE Reg. No. 13 C Nm Brake

41、camshaft input torque C C Nm Converted camshaft input torque (reference paragraph 15.2.3.4) CoNm Threshold camshaft input torque (i.e. minimum camshaft torque necessary to produce a measurable braking torque) CoCadmNm Technically admissible camshaft input torque at a pressure in the brake actuator l

42、ower than the maximum pressure (reference paragraph 15.2.3.3 ) CmaxNm Maximum technically admissible camshaft input torque C maxE m Wheelbase E ERm Distance between kingpin and centre of axle or axles of semi-trailer (or distance between drawbar coupling and centre of axle or axles of centre-axle tr

43、ailer) ERe Index to indicate the reference axle e Adhesion utilization of the trailer H value on the high adhesion surface HL value on the low adhesion surface LFAN Average output thrust of one brake actuator at a pressure pAcorresponding to pm= 0,65 MPa (= 6,5 bar) FAN Converted brake actuator outp

44、ut thrust (to allow for difference between pAeand pA) (reference paragraph 15.2.3.4) FAON Threshold brake actuator output thrust (i.e. minimum output thrust necessary to produce a measurable braking torque) BS ISO 7634:20074 Table 1 (continued) Symbols UnitaDescription Symbol used in ECE Reg. No. 13

45、 FAadmN Maximum technically admissible brake actuator output thrust at a pressure in the brake actuator lower than the maximum pressure (reference paragraph 15.2.3.3) FAmaxN Maximum technically admissible brake actuator output thrust FBN Braking force at the periphery of the wheel(s) (if no other in

46、dication is given) T FBaN Braking force resulting at the periphery of the wheel(s) for hot braking T FBaRN Sum of braking forces resulting at the periphery of all wheels of the trailer for hot braking TRFBhN Braking force at the periphery of the wheel(s) for heating the brake(s) FBRN Sum of braking

47、forces at the periphery of all wheels of the trailer TRFbRN Braking force of the trailer with the antilock system inoperative FbRFbRALN Braking force of the trailer with the antilock system operative FbRALFbRALSN FbRALon split adhesion surface FbRmaxN Maximum value of FbRFbRmaxFCdN Total normal reac

48、tion of road surface on those axles of the motor vehicle and trailer combination which are both unbraked and driven FCdFCndN Total normal static reaction of road surface on those axles of the motor vehicle and trailer combination which are unbraked yet non-driven FCndFdynN Normal dynamic reaction of

49、 road surface on the trailer axles, with the antilock system operative FdynFfdynN Fdynon front axle of a full trailer FfdynFiN Normal static reaction of road surface on axle i Pi,FiFidynN Fdynon axle i of a full trailer FidynFKN Normal static reaction at a tractor fifth wheel on semi-trailer kingpin, or at mechanical coupling of a towing vehicle on the drawbar of a centre-axle trailer FLN Longitudinal force on a mechanical coupling D FMN Total normal reaction of