BS ISO 11999-1-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while fighting f.pdf

《BS ISO 11999-1-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while fighting f.pdf》由会员分享，可在线阅读，更多相关《BS ISO 11999-1-2015 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and or flame while fighting f.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 11999-1:2015PPE for firefighters Testmethods and requirements forPPE used by firefighters whoare at risk of exposure to highlevels of heat and/or flamewhile fighting fires occurring instructuresPart 1: GeneralBS ISO 11999-1:2015 BRITISH STANDARDNational forewordThis B

2、ritish Standard is the UK implementation of ISO 11999-1:2015.The UK participation in its preparation was entrusted to TechnicalCommittee PH/14, Firefighters personal protective equipment.A list of organizations represented on this committee can beobtained on request to its secretary.This publication

3、 does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 83305 2ICS 13.340.10Compliance with a British Standard cannot confer immunity fromleg

4、al obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2015.Amendments issued since publicationDate Text affectedBS ISO 11999-1:2015 ISO 2015PPE for firefighters Test methods and requirements for PPE used by firefighters who ar

5、e at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 1: Generalquipement de protection personnelle pour pompiers Mthodes dessai et exigences pour les quipements de protection personnelle utiliss par les pompiers qui sont risque dune exposition d

6、es niveaux levs de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures Partie 1: GnralitsINTERNATIONAL STANDARDISO11999-1First edition2015-06-01Reference numberISO 11999-1:2015(E)BS ISO 11999-1:2015ISO 11999-1:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTE

7、CTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

8、 written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 11999

9、-1:2015ISO 11999-1:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Abbreviated terms and subscripts 104.1 Abbreviated terms 104.2 Subscripts . 105 Design and performance requirements for PPE items and ensembles 115.1 Type 1 and Type 2 items of PPE 115.

10、1.1 General. 115.1.2 Combination of Type 1 or Type 2 items of PPE 115.2 Type 1 and Type 2 ensembles . 115.3 Mixed ensemble 136 Marking .136.1 General 136.2 Label durability and legibility . 136.2.1 Pretreatment by exposure to heat . 136.2.2 Pretreatment by abrasion . 136.3 Compliance marking require

11、ments for an item of PPE.146.4 Additional marking for clothing 146.5 Additional marking for gloves 156.6 Additional marking for footwear 156.7 Additional marking for helmets 156.8 Additional marking for face and/or eye protection devices .166.9 Additional marking for hearing protection devices .166.

12、10 Additional marking for fire hoods . 166.11 Additional marking for breathing apparatus . 166.12 Additional marking for compatibility . 167 Manufacturers instructions to be supplied with each item of PPE 177.1 Contents . 177.2 Additional information for ISO 11999-3 clothing 177.2.1 Optional clothin

13、g test using an instrumented manikin .177.2.2 Optional drag rescue devices (DRD) 187.3 Additional information for ISO 11999-4 gloves 187.4 Additional information for ISO 11999-5 helmet.187.5 Additional information for ISO 11999-6 footwear .187.6 Additional information for ISO 119997 face and eye pro

14、tection .187.7 Additional information for ISO 11999-8 hearing protection devices .197.8 Additional information for ISO 119999 fire hoods .197.9 Additional information for ISO 1199910 respiratory protection 197.10 Additional information for whole ensembles 197.11 Additional information about compatib

15、ility 197.12 Availability . 198 Information available upon request from the supplier of a combination of items of PPE or of an ensemble .19Annex A (informative) Information on risk assessment .21Annex B (normative) Testing and classification of performance for items of PPE, for combinations of items

16、 of PPE, and for ensembles 31Bibliography .34 ISO 2015 All rights reserved iiiContents PageBS ISO 11999-1:2015ISO 11999-1:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internat

17、ional Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with I

18、SO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Pa

19、rt 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the

20、elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations rec

21、eived (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs ad

22、herence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword Supplementary informationThe committee responsible for this document is ISO/TC 94, Personal safety Protective clothing and equipment, Subcommittee SC 14, Fire-fighters personal equipment.ISO 11999

23、consists of the following parts, under the general title PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures: Part 1: General Part 2: Compatibility Part 3: Clothin

24、g Part 4: GlovesThe following parts are under preparation: Part 5: Helmets Part 6: Footwear Part 7: Face and eye protection Part 8: Hearing Part 9: Firehoods Part 10: Respiratory protectionNOTE The number of this draft has been changed from ISO/DIS 11613-1 to ISO 11999-1. The Committee agreed a new

25、number for this project was appropriate given the scope of the publication of the ISO 11999 series was to cover ensemble standards. It was further agreed that ISO 11613:1999 would remain current.iv ISO 2015 All rights reservedBS ISO 11999-1:2015ISO 11999-1:2015(E)IntroductionThis International Stand

26、ard provides minimum design and performance requirements for personal protective equipment (PPE) worn by firefighters to reduce injury and/or the loss of life. Amongst other hazards faced by firefighters is exposure to high thermal loads and to flames.This International Standard details the design a

27、nd performance requirements for the various items of PPE covered in all parts and for the compatibility of items of PPE when worn together.This International Standard specifies, in ISO 119992, design and performance requirements for the compatibility of ISO 119993, ISO 119994, ISO 119995, ISO 119996

28、, ISO 119997, ISO 119998, ISO 11999-9, and ISO 11999-10 when all items covered in this International Standard are worn together, thereby creating an ensemble standard. All items have to meet the general requirements for marking and manufacturers instructions (this part of ISO 11999), as well as the

29、specific marking and manufacturers instructions of the respective parts of ISO 11999.Under best practice for health and safety procedures, prior to choosing any PPE, a risk assessment of the workplace is carried out. Where hazards are identified and cannot be removed from a workplace, the items of P

30、PE chosen to protect the personnel need to be fit for their intended use while allowing the personnel to carry out the work required of them. In environments where firefighters may be required to work, not only must the PPE protect the firefighters while enabling them to achieve their objectives at

31、an incident, but it must also safeguard them and allow a safe escape. The PPE chosen must also allow firefighters to carry out their duties without undue stress being caused by the PPE.Some PPE, particularly PPE to protect against mortal danger, can have failure levels far above the limit of exposur

32、es of human beings. On sites where such PPE is being used, it is important to ensure that proper and suitable safety procedures are in place which can identify when personnel should be withdrawn from dangerous or potentially dangerous situations and which can ensure that the relevant medical support

33、 is available for firefighters.Since the decision on which PPE ensemble to use following risk assessment will dictate the parameters for protection of the persons who have to wear it, it is critical that decision-makers have knowledge of the risks against which the PPE is supposed to protect and its

34、 limitations. It is recommended that those who make the decision on the choice of PPE for particular workplaces should be competent in their knowledge and understanding of both the workplace hazards and the PPE from which to choose, prior to making these decisions, to ensure that informed decisions

35、are taken.Further detail on carrying out risk assessment to ascertain the type of PPE required to protect personnel working in specific areas is included in Annex A of this part of ISO 11999.Hazards in the workplaces of firefighters are varied but can be common from workplace to workplace; therefore

36、, some uses of PPE for firefighters can be multipurpose. Because this International Standard has been developed on a risk assessment approach, a number of different types, levels, or classes are given for certain performance requirements of various parts of a PPE ensemble. Based on their risk assess

37、ment, users of this International Standard can make a choice of which levels or classes are required for the particular workplace where their personnel are expected to work. This can include fires in domestic and commercial buildings, fires in industry, including aviation, petrochemical, chemical, p

38、harmaceutical, land-based marine incidents, rescue, etc.This International Standard includes separate parts for each item of a firefighters ensemble. As PPE to protect each part of the body can be complex, this International Standard draws from the expertise of other Technical Committees in ISO whic

39、h specialize in such protection.The results of the user risk assessment for certain workplaces can require the use of PPE with higher and/or different levels or classes of performance than those in this International Standard. PPE covered in this part of ISO 11999 will not protect from all possible

40、exposures. Nothing in this International Standard is intended to restrict any jurisdiction, purchaser, or manufacturer from exceeding the minimum performance requirements specified in this International Standard. ISO 2015 All rights reserved vBS ISO 11999-1:2015ISO 11999-1:2015(E)Another objective i

41、n the Business Plan of ISO/TC 94/SC 14 is to provide guidance on the selection, use, care, and maintenance for firefighters PPE. Such activities are critical to the lifespan and continuing protective ability of any PPE and policies covering these aspects should be implemented as soon as the PPE is i

42、ntroduced into use. ISO/TC 94/SC 14 has developed a Technical Report on this subject, ISO/TR 21808. Firefighters should be trained in the selection, use, care, and maintenance of their PPE. Firefighters should also be trained in the performance and limitation of their PPE.vi ISO 2015 All rights rese

43、rvedBS ISO 11999-1:2015PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 1: General1 ScopeThis International Standard specifies minimum design and performan

44、ce requirements for personal protective equipment (PPE) to be used by firefighters, primarily but not solely to protect against exposure to flame and high thermal loads.To assist with choice based on user risk assessment, types and performance levels for different categories of protection are includ

45、ed.The scope of this International Standard does not include PPE for use in highrisk fire exposures where, for example, protective clothing with reflective surface according to ISO 15538 might be more appropriate, or for use in longterm firefighting operations in high ambient temperature (for exampl

46、e, bush, wildland, or forest firefighting) where equipment according to ISO 16073 might be more appropriate.Similarly, this International Standard does not include PPE to protect against chemical and biological hazards, other than against shortterm and accidental exposure while engaged in firefighti

47、ng and associated activities when fighting fires occurring in structures.This part of ISO 11999 describes the general structure of this International Standard, sets design and performance requirements for PPE, and includes requirements for marking and manufacturers instructions.2 Normative reference

48、sThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/TR

49、11610, Protective clothing VocabularyISO 11999-3:2013, PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 3: ClothingISO 12947-2, Textiles Determination of the abrasion resistance of fabrics by the Martindale method Part 2: Determination of specimen breakdownISO 13688, Protective clothing General requirementsISO 17493, Clothing and equipment for protecti