BS IEC 60092-101-2002 Electrical installation in ships - Definitions and general requirements《船上电气装置 定义和总要求》.pdf

《BS IEC 60092-101-2002 Electrical installation in ships - Definitions and general requirements《船上电气装置 定义和总要求》.pdf》由会员分享，可在线阅读，更多相关《BS IEC 60092-101-2002 Electrical installation in ships - Definitions and general requirements《船上电气装置 定义和总要求》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS IEC 60092-101: 1994 Electrical installations in ships Part 101: Definitions and general requirements ICS 47.020.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS IEC 60092-101:1994 This British Standard, having been prepared under the direction of the El

2、ectrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 8 July 2002 BSI 8 July 2002 ISBN 0 580 39943 5 National foreword This British Standard reproduces verbatim IEC 60092-101:1994 including Amd 1:1995 and Corrigendum

3、No 1:1996 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee JPEL/18, Electrical installations of ships and of mobile and fixed offshore units, which has the responsibility to: A list of organizations represented on this commit

4、tee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may co

5、ntain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find

6、” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal

7、obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summ

8、ary of pages This document comprises a front cover, an inside front cover, the IEC title page, pages 2 to 36, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Commen

9、tsBSIEC60092101:1994CONTENTS Page Foreword 3 Introduction 4 Clause SECTION 1: GENERAL 1.1 Scope. 5 1.2 Normative references . 5 1.3 Definitions 6 SECTION 2: GENERAL REQUIREMENTS AND CONDITIONS 2.1 Workmanship and material. 12 2.2 Applicability of the standards to a.c. and d.c. 12 2.3 Acceptance of s

10、ubstitutes or alternatives . 13 2.4 Provisions for maximum loads 13 2.5 Additions and alterations 13 2.6 Environmental conditions . 13 2.7 Materials 16 2.8 Power supply system characteristics 17 2.9 Electrical apparatus for explosive gas atmospheres. 19 2.10 Precautions necessary when electrical fit

11、tings, cables, etc., are attached to aluminium structures 19 2.11 Clearance and creepage distances 19 2.12 Insulation 19 2.13 Maintenance and inspection. 19 2.14 Pilot lamps 19 2.15 Cable entries 19 2.16 Precautions against vibration and mechanical shock 20 2.17 Position in ship . 20 2.18 Compartmen

12、ts 20 2.19 Mechanical protection. 20 2.20 Protection from water, steam, and oil . 20 2.21 Protection from dripping water 20 2.22 Protection against electrical shock . 20 2.23 Axes of rotation 20 2.24 Adjacent combustible material 21 2.25 Handrails 21 2.26 Magnetic compasses 21 2.27 Enclosures . 21 2

13、.28 Classification tests for materials . 21 Annexes A Flame-retardant test for cables . 25 B Guidance on environmental conditions . 28 C Test on bunched wires or cables under fire conditions 36 BSIEC60092101:1994 BSI8July2002 2BSIEC60092101:1994 BSI8July2002 3BSIEC60092101:1994 BSI8July2002 4BSIEC60

14、092101:1994 BSI8July2002 5BSIEC60092101:1994 BSI8July2002 6BSIEC60092101:1994 BSI8July2002 7BSIEC60092101:1994 BSI8July2002 8BSIEC60092101:1994 BSI8July2002 9BSIEC60092101:1994 BSI8July2002 10BSIEC60092101:1994 BSI8July2002 11BSIEC60092101:1994 BSI8July2002 12BSIEC60092101:1994 BSI8July2002 13BSIEC6

15、0092101:1994 BSI8July2002 14BSIEC60092101:1994 BSI8July2002 15BSIEC60092101:1994 BSI8July2002 16BSIEC60092101:1994 BSI8July2002 17 it may not be feasible to suppress the harmonics. Consideration should beBSIEC60092101:1994 BSI8July2002 18BSIEC60092101:1994 BSI8July2002 19 conditions rht-eesidm deela

16、tBSIEC60092101:1994 BSI8July2002 20BSIEC60092101:1994 BSI8July2002 21BSIEC60092101:1994 BSI8July2002 22BSIEC60092101:1994 BSI8July2002 23BSIEC60092101:1994 BSI8July2002 24BSIEC60092101:1994 BSI8July2002 25 ctidnoions three-sided metalBSIEC60092101:1994 BSI8July2002 26BSIEC60092101:1994 BSI8July2002

17、27BSIEC60092101:1994 BSI8July2002 28BSIEC60092101:1994 BSI8July2002 29BSIEC60092101:1994 BSI8July2002 30BSIEC60092101:1994 BSI8July2002 31BSIEC60092101:1994 BSI8July2002 32BSIEC60092101:1994 BSI8July2002 33BSIEC60092101:1994 BSI8July2002 34BSIEC60092101:1994 BSI8July2002 35BSIEC60092101:1994 BSI8Jul

18、y2002 36BS IEC 60092-101: 1994 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Chart

19、er. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccura

20、cy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which e

21、nsures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also av

22、ailable from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information o

23、n national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)

24、20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700

25、1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the cop

26、yright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or other

27、wise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.