BS EN ISO 14172-2015 Welding consumables Covered electrodes for manual metal arc welding of nickel and nickel alloys Classification《焊接消耗品 镍和镍合金的手工金属弧焊用涂敷焊条 分类》.pdf

《BS EN ISO 14172-2015 Welding consumables Covered electrodes for manual metal arc welding of nickel and nickel alloys Classification《焊接消耗品 镍和镍合金的手工金属弧焊用涂敷焊条 分类》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 14172-2015 Welding consumables Covered electrodes for manual metal arc welding of nickel and nickel alloys Classification《焊接消耗品 镍和镍合金的手工金属弧焊用涂敷焊条 分类》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 14172:2015Welding consumables Covered electrodes for manualmetal arc welding of nickel andnickel alloys ClassificationBS EN ISO 14172:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO14172:2015. It supersedes BS EN ISO 1

2、4172:2008 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/39, Welding consumables.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisio

3、ns of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 83849 1ICS 25.160.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published und

4、er the authority of theStandards Policy and Strategy Committee on 31 October 2015.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14172 September 2015 ICS 25.160.20 Supersedes EN ISO 14172:2008English Version Welding consumables - Covered

5、 electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015) Produits consommables pour le soudage - lectrodes enrobes pour le soudage manuel larc du nickel et des alliages de nickel - Classification (ISO 14172:2015)Schweizustze - Umhllte Stabelektroden zum

6、Lichtbogenhandschweien von Nickel und Nickellegierungen - Einteilung (ISO 14172:2015) This European Standard was approved by CEN on 10 July 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a

7、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).

8、A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyp

9、rus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kin

10、gdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14

11、172:2015 EBS EN ISO 14172:2015EN ISO 14172:2015 (E) 3 European foreword This document (EN ISO 14172:2015) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is

12、held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility th

13、at some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 14172:2008. According to the CEN-CENELEC Internal Regulations, the national standards organiza

14、tions of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

15、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14172:2015 has been approved by CEN as EN ISO 14172:2015 without any modification. BS EN ISO 14172:2015ISO 14172:2015(E)Foreword iv1 S

16、cope . 12 Normative references 13 Classification 14 Symbols and requirements 14.1 Symbol for the product/process 14.2 Symbol for the chemical composition of the all-weld metal . 24.3 Rounding procedure. 25 Chemical analysis . 26 Mechanical properties of the all-weld metal. 27 Retests . 88 Technical

17、delivery conditions . 89 Designation 9Annex A (informative) System for designation of welding filler metals .10Annex B (informative) Description of consumables classes .11Annex C (informative) Equivalent national specifications .17Bibliography .19 ISO 2015 All rights reserved iiiContents PageBS EN I

18、SO 14172:2015ISO 14172:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interest

19、ed in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Co

20、mmission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents

21、 should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible f

22、or identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the

23、 convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: For

24、eword - Supplementary informationThe committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee SC 3, Welding consumables.Requests for official interpretations of any aspect of this International Standard should be directed to the Secretariat of ISO/TC 44/SC 3 v

25、ia your national standards body. A complete listing of these bodies can be found at www.iso.org.This third edition cancels and replaces the second edition (ISO 14172:2008), which has been technically revised.iv ISO 2015 All rights reservedBS EN ISO 14172:2015INTERNATIONAL STANDARD ISO 14172:2015(E)W

26、elding consumables Covered electrodes for manual metal arc welding of nickel and nickel alloys Classification1 ScopeThis International Standard prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for manual metal arc welding and overlaying. It includes those

27、compositions in which the nickel content exceeds that of any other element.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated refe

28、rences, the latest edition of the referenced document (including any amendments) applies.ISO 544, Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markingsISO 6847, Welding consumables Deposition of a weld metal pad for che

29、mical analysisISO 14344, Welding consumables Procurement of filler materials and fluxesISO 15792-1:2000, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys. Amended by ISO 15792-1:2000/Amd 1:2011.ISO 80000-1:2009, Quantities and

30、 units Part 1: General3 ClassificationA covered electrode shall be classified in accordance with the chemical composition of the all-weld metal as given in Table 1 and the mechanical properties listed in Table 2. The symbol for the classification is divided into two parts:a) the first part gives a s

31、ymbol indicating the product/process to be used;b) the second part gives a symbol indicating the chemical composition of the all-weld metal.4 Symbols and requirements4.1 Symbol for the product/processThe symbol for covered electrodes used for manual metal arc welding shall be the letter “E”. ISO 201

32、5 All rights reserved 1BS EN ISO 14172:2015ISO 14172:2015(E)4.2 Symbol for the chemical composition of the all-weld metalThe symbol for the chemical composition of the all-weld metal shall comprise “Ni” plus four digits, as shown in Table 1. The first digit is an indicator of the class of alloy depo

33、sited, where2 indicates no significant alloy addition,4 indicates significant copper addition (nickel-copper alloys),6 indicates significant chromium addition, with iron less than 25 % (nickel-chromium-iron and nickel-chromium-molybdenum alloys),8 indicates significant chromium addition, with iron m

34、ore than 25 % (nickel-iron-chromium alloys),10 indicates significant molybdenum addition without significant chromium addition (nick-el-molybdenum alloys).The remaining digits indicate the particular alloy deposited. The basis of the system of designation is described in Annex A.NOTE In addition, th

35、e chemical symbol can be used.4.3 Rounding procedureFor purposes of determining compliance with the requirements of this International Standard, the actual test values obtained shall be subject to ISO 80000-1:2009, B.3, Rule A. If the measured values are obtained by equipment calibrated in units oth

36、er than those of this International Standard, the measured values shall be converted to the units of this International Standard before rounding. If an arithmetic average value is to be compared to the requirements of this International Standard, rounding shall be done only after calculating the ari

37、thmetic average. If the test method cited in Clause 2 contains instructions for rounding that conflict with the instructions of this International Standard, the rounding requirements of the test method standard shall apply. The rounded results shall fulfil the requirements of the appropriate table f

38、or the classification under test.5 Chemical analysisChemical analysis shall be performed on any suitable all-weld metal test specimen. In case of dispute, the test specimen specified in ISO 6847 shall be used. The test results shall meet the requirements of Table 1 for the classification under test.

39、 Any analytical technique can be used; but, in case of dispute, reference shall be made to established published methods.6 Mechanical properties of the all-weld metalMechanical properties are not part of the designation, but they are required for classification. The mechanical properties of the all-

40、weld metal, deposited using covered electrodes in accordance with Table 1, shall be determined using a test assembly type 1.3 in accordance with ISO 15792-1:2000 with 4,0 mm electrodes. The minimum tensile properties shall be in accordance with Table 2.2 ISO 2015 All rights reservedBS EN ISO 14172:2

41、015ISO 14172:2015(E)Table1 Symbols and all-weld metal chemical composition requirementsAlloysymbolChemicalcomposition% (by mass)aNumer-ical symbolChemical symbolCMnFeSiCuNibCoAlTiCrNbcMoVWNotesd, eNickelNi2061NiTi30,100,70,71,20,2min. 92,01,01,0 to 4,0Nickel-CopperNi4060NiCu30Mn3Ti0,154,02,51,527,0

42、to 34,0min. 62,01,01,0Ni4061NiCu27Mn3NbTi0,154,02,51,324,0 to 31,0min. 62,01,01,53,0Nickel-ChromiumNi6082NiCr20Mn3Nb0,102,0 to 6,04,00,80,5min. 63,00,518,0 to 22,01,5 to 3,02,0Ni6172NiCr50Nb0,101,51,01,00,25min. 41,048,0 to 52,01,0 to 2,50,02P0,02SNi6231NiCr22W14Mo0,05 to 0,100,3 to 1,03,00,3 to 0,7

43、0,5min. 45,05,00,50,120,0 to 24,01,0 to 3,013,0 to 15,0Nickel-Chromium-IronNi6025NiCr25Fe10AlY0,10 to 0,250,58,0 to 11,00,8min. 55,01,5 to 2,20,324,0 to 26,00,15YNi6045NiCr27Fe23Si0,05 to 0,202,521,0 to 025,02,5 to 3,00,30min. 38,01,00,3026,0 to 29,00,04P0,03SNi6062NiCr15Fe8Nb0,083,511,00,80,5min. 6

44、2,013,0 to 17,00,5 to 4,0Ni6093NiCr15Fe8NbMo0,201,0 to 5,012,01,00,5min. 60,013,0 to 17,01,0 to 3,51,0 to 3,5Ni6094NiCr14Fe4NbMo0,151,0 to 4,512,00,80,5min. 55,012,0 to 17,00,5 to 3,02,5 to 5,51,5Ni6095NiCr15Fe8NbMoW0,201,0 to 3,512,00,80,5min. 55,013,0 to 17,01,0 to 3,51,0 to 3,51,5 to 3,5Ni6132NiC

45、r15Fe9Nb0,083,511,00,750,50min. 62,013,0 to 17,01,5 to 4,00,03P0,015S ISO 2015 All rights reserved 3BS EN ISO 14172:2015ISO 14172:2015(E)AlloysymbolChemicalcomposition% (by mass)aNumer-ical symbolChemical symbolCMnFeSiCuNibCoAlTiCrNbcMoVWNotesd, eNi6133NiCr16Fe12NbMo0,101,0 to 3,512,00,80,5min. 62,0

46、13,0 to 17,00,5 to 3,00,5 to 2,5Ni6152NiCr30Fe9Nb0,055,07,0 to 12,00,80,5min. 50,00,50,528,0 to 31,51,0 to 2,50,5FNi6182NiCr15Fe6Mn0,105,0 to 10,010,01,00,5min. 60,01,013,0 to 17,01,0 to 3,5*0,3 max. Tawhere specifiedNi6333NiCr25Fe16Co-Mo3W0,101,2 to 2,0min. 16,00,8 to 1,20,544,0 to 47,02,5 to 3,524

47、,0 to 26,02,5 to 3,52,5 to 3,5Ni6701NiCr36Fe7Nb0,35 to 0,500,5 to 2,07,00,5 to 2,042,0 to 48,033,0 to 39,00,8 to 1,8Ni6702NiCr28Fe6W0,35 to 0,500,5 to 1,56,00,5 to 2,047,0 to 50,027,0 to 30,04,0 to 5,5Ni6704NiCr25Fe10Al3YC0,15 to 0,300,58,0 to 11,00,8min. 55,01,8 to 2,80,324,0 to 26,00,15YNi8025NiCr

48、29Fe26Mo0,061,0 to 3,030,00,71,5 to 3,035,0 to 40,00,11,0*27,0 to 31,01,02,5 to 4,5*orNbNi 8165NiFe30Cr25Mo0,031,0 to 3,030,00,71,5 to 3,037,0 to 42,00,11,023,0 to 27,03,5 to7,5Nickel-MolybdenumNi1001NiMo28Fe50,071,04,0 to 7,01,00,5min. 55,02,51,026,0 to 30,00,61,0Ni1004NiMo25Cr3Fe50,121,04,0 to 7,0

49、1,00,5min. 60,02,52,5 to 5,523,0 to 27,00,61,0Ni1008NiMo19WCr0,101,510,00,80,5min. 60,00,5 to 3,517,0 to 20,02,0 to 4,0Ni1009NiMo20WCu0,101,57,00,80,3 to 1,3min. 62,018,0 to 22,02,0 to 4,0Ni1062NiMo24Cr8Fe60,021,04,0 to 7,00,7min. 60,06,0 to 9,022,0 to 26,0Table1(continued)4 ISO 2015 All rights reservedBS EN ISO 14172:2015ISO 14172:2015(E)AlloysymbolChemicalcomposition% (by mass)aNumer-ical symbolCh