BS EN 62561-3-2012 Lightning Protection System Components (LPSC) Requirements for isolating spark gaps《雷电防护系统组件(LPSC) 隔离火花间隙的要求》.pdf

《BS EN 62561-3-2012 Lightning Protection System Components (LPSC) Requirements for isolating spark gaps《雷电防护系统组件(LPSC) 隔离火花间隙的要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62561-3-2012 Lightning Protection System Components (LPSC) Requirements for isolating spark gaps《雷电防护系统组件(LPSC) 隔离火花间隙的要求》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationLightning Protection SystemComponents (LPSC)Part 3: Requirements for isolating spark gaps (IEC 62561-3:2012, modified)BS EN 62561-3:2012Copyright European Committee for Electrote

2、chnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62561-3:2012. It wasderived from IEC 62561-3:2012. It supersedes BS EN 50164-3:20

3、06+A1:2009, which will be withdrawn on 16 March 2015.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags (e.g. ).The UK participation in its preparation was entrusted to Technical CommitteeGEL/81, Protection against lightning.A list

4、of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012 Published by BSI Standards Limit

5、ed 2012 ISBN 978 0 580 61129 2 ICS 29.020; 91.120.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2012.Amendments issued since publicationAmd. No. Date

6、 Text affectedBRITISH STANDARDBS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62561-3 NORME EUROPENNE EUROPISCHE NORM

7、June 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means res

8、erved worldwide for CENELEC members. Ref. No. EN 62561-3:2012 E ICS 29.020; 91.120.40 Supersedes EN 50164-3:2006 + A1:2009English version Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (IEC 62561-3:2012, modified) Composants de systme de protectioncontr

9、e la foudre (CSPF) -Partie 3: Exigences pour les clateursdisolement (CEI 62561-3:2012, modifie)Blitzschutzsystembauteile (LPSC) -Teil 3: Anforderungen an Trennfunkenstrecken (IEC 62561-3:2012, modifiziert) This European Standard was approved by CENELEC on 2012-03-16. CENELEC members are bound to com

10、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELE

11、C Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre h

12、as the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, th

13、e Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking p

14、ermitted without license from IHS-,-,-EN 62561-3:2012 - 2 - Foreword The text of document 81/418/FDIS, future edition 1 of IEC 62561-3, prepared by IEC/TC 81, “Lightning protection“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62561-3:2012. A draft amendment, which c

15、overs common modifications to IEC 62561-3 (81/418/FDIS), was prepared by CLC/TC 81X “Lightning protection“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorse

16、ment (dop) 2013-03-16 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-03-16 This document supersedes EN 50164-3:2006 + A1:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rig

17、hts. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62561-3:2012 are prefixed “Z”. Endorsement notice The text of the International Standard IEC 62561-3:2012

18、was approved by CENELEC as a European Standard with agreed common modifications. BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 62

19、561-3:2012 COMMON MODIFICATIONS Whole document Replace all references to IEC 62305 by references to EN 62305. Replace all references to IEC 62561 by references to EN 62561. 1 Scope Add the following at the end of the clause: Protective devices according to EN 50122-1 and EN 50123-5 are outside the s

20、cope of this European Standard. 6 Tests Under 6.2.4.1, Table 1, footnote a, replace “IEC 62305-1 and IEC 61643-11“ by “EN 62305-1 and EN 61643-11“. Annexes Annex A (normative) Environmental test for isolating spark gaps In A.2, replace thrice “IEC 60068-2-52:1996“ by “EN 60068-2-52:1996“. BS EN 6256

21、1-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62561-3:2012 - 4 - Add the following new annexes: Annex ZA (normative) Normative references to int

22、ernational publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

23、 of the referenced document (including any amendments) applies. NOTE Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-52 + corr. July 1996 1996 Environmental testing - Part 2: T

24、ests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 1996 IEC 61643-11 - Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods EN 61643-11 - IEC 62305-1 - Protection against lightning - Pa

25、rt 1: General principles EN 62305-1 - IEC 62561-1 - Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components EN 62561-1 - ISO 6957 1988 Copper alloys - Ammonia test for stress corrosion resistance - - ISO 6988 1985 Metallic and other non-organic coatings - Sulfu

26、r dioxide test with general condensation of moisture EN ISO 6988 1994 BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 5 - EN 62561-3:2012

27、Annex ZB (informative) Identification and differences of tests between EN 62561-3:2012 and EN 50164-3:2006 + A1:2009 Table ZB.1 Identification and differences of tests between EN 62561-3:2012 and EN 50164-3:2006 + A1:2009 Test description EN 62561-3:2012 EN 50164-3:2006 + A1:2009 Deviations / Remark

28、s Isolation resistance 6.2.1 6.2.1 None Withstand voltage 6.2.2 6.2.2 None Rated impulse sparkover voltage 6.2.3 6.2.3 None Lightning current 6.2.4 6.2.4 None Isolation resistance 6.2.5 6.2.4.1 None Withstand voltage 6.2.6 6.2.4.2 None Rated impulse sparkover voltage 6.2.7 6.2.4.3 None Marking test

29、6.3 6.3 None BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62561-3:2012 - 6 - Bibliography Add the following reference: EN 50164-3:200

30、6 + A1:2009, Lightning Protection Components (LPC) Part 3: Requirements for isolating spark gaps Replace the references to IEC standards with the following: EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 62305-3, Protection against lightning Part 3: Physical damage t

31、o structures and life hazard (IEC 62305-3) EN 62305-4, Protection against lightning Part 4: Electrical and electronic systems within structures (IEC 62305-4) BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo

32、 reproduction or networking permitted without license from IHS-,-,- 2 62561-3 IEC:2012(E) CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 8 4 Classification 9 5 Requirements . 9 5.1 General . 9 5.2 Environmental requirements 9 5.3 Installation instructions

33、9 5.4 Lightning current carrying capability 10 5.5 Rated impulse sparkover voltage . 10 5.6 Rated withstand voltage 10 5.6.1 Rated DC withstand voltage 10 5.6.2 Rated AC withstand voltage . 10 5.7 Isolation resistance . 10 5.8 Marking . 10 5.9 UV resistance 10 6 Tests 11 6.1 General conditions for t

34、ests . 11 6.2 Electrical test 11 6.2.1 Isolation resistance 11 6.2.2 Withstand voltage 11 6.2.3 Rated impulse sparkover voltage . 12 6.2.4 Lightning current . 12 6.2.5 Isolation resistance 13 6.2.6 Withstand voltage 13 6.2.7 Rated impulse sparkover voltage . 13 6.3 Marking test 13 6.3.1 General cond

35、itions for tests . 13 6.3.2 Acceptance criteria 13 7 Electromagnetic compatibility (EMC) 14 8 Structure and content of the test report 14 8.1 General . 14 8.2 Report identification 14 8.3 Specimen description 14 8.4 Standards and references . 14 8.5 Test procedure 15 8.6 Testing equipment descriptio

36、n . 15 8.7 Measuring instruments description 15 8.8 Results and parameters recorded 15 8.9 Statement of pass/fail 15 Annex A (normative) Environmental test for isolating spark gaps . 16 Annex B (normative) Flow chart of tests . 17 BS EN 62561-3:2012Copyright European Committee for Electrotechnical S

37、tandardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62561-3 IEC:2012(E) 3 Bibliography 18 Table 1 Lightning impulse current (Iimp) parametersa13 BS EN 62561-3:2012Copyright European Committee for Electrotechnical

38、 Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 62561-3 IEC:2012(E) INTRODUCTION This part of IEC 62561 deals with the requirements and tests for isolating spark gaps (ISG) used for the installation of a

39、 lightning protection system (LPS) designed and implemented according to IEC 62305 series of standards. BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license

40、from IHS-,-,-62561-3 IEC:2012(E) 7 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 3: Requirements for isolating spark gaps (ISG) 1 Scope This part of IEC 62561 specifies the requirements and tests for isolating spark gaps (ISG) for lightning protection systems. ISGs can be used to indirectly bon

41、d a lightning protection system to other nearby metalwork where a direct bond is not permissible for functional reasons. Typical applications include the connection to: earth termination systems of power installations; earth termination systems of telecommunication systems; auxiliary earth electrode

42、s of voltage-operated, earth fault circuit breakers; rail earth electrode of AC and DC railways; measuring earth electrodes for laboratories; installations with cathodic protection and stray current systems; service entry masts for low-voltage overhead cables; bypassing insulated flanges and insulat

43、ed couplings of pipelines. This standard does not cover applications where follow currents occur. NOTE Lightning protection system components (LPSC) can also be suitable for use in hazardous conditions such as fire and explosive atmosphere. Due regard will be taken of the extra requirements necessar

44、y for the components to be installed in such conditions. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates

45、t edition of the referenced document (including any amendments) applies. IEC 60068-2-52:1996, Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) IEC 61643-11, Low-voltage surge protective devices Part 11: Surge protective devices connected to low-voltage pow

46、er systems Requirements and test methods IEC 62561-1, Lightning protection system components (LPSC) Part 1: Requirements for connection components IEC 62305-1, Protection against lightning Part 1: General principles ISO 6957:1988, Copper alloys Ammonia test for stress corrosion resistance ISO 6988:1

47、985, Metallic and other non-organic coatings Sulphur dioxide test with general condensation of moisture BS EN 62561-3:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license

48、from IHS-,-,- 8 62561-3 IEC:2012(E) 3 Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1 isolating spark gap ISG component with discharge distance for isolating electrically conductive installation sections Note 1 to entry In the event of a lightning strike, the installation sections are temporarily connected conductively as the result of the response of the discharge. 3.2 sparkover v