BS EN 50377-9-2-2004 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MT-RJ terminated on IEC 60793-2 ca.pdf

《BS EN 50377-9-2-2004 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MT-RJ terminated on IEC 60793-2 ca.pdf》由会员分享，可在线阅读，更多相关《BS EN 50377-9-2-2004 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type MT-RJ terminated on IEC 60793-2 ca.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 50377-9-2:2004 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre The European Standard EN 50377-9-2:2004 has the status of a British

2、Standard ICS 33.180.20 BS EN 50377-9-2:2004 This British Standard was published under the authority of the Standards Policy and S t r a t e g y C o m m i t t e e o n 28 April 2004 BSI 28 April 2004 ISBN 0 580 43657 8 National foreword This British Standard is the official English language version of

3、 EN 50377-9-2:2004. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive conponents, which has the responsibility to: A list of organizations represented on this subcommittee can b

4、e obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” fac

5、ility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligatio

6、ns. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pa

7、ges This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 24, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPE

8、AN STANDARD EN 50377-9-2 NORME EUROPENNE EUROPISCHE NORM March 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC

9、 - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-9-2:2004 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 9-2: Type MT-RJ termi

10、nated on IEC 60793-2 category B1.1 singlemode fibre Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques Spcifications de produits Partie 9-2: Type MT-RJ cbl sur une fibre unimodale de la catgorie B1.1 selon la CEI 60793-2 Steckverbinderstz

11、e und Verbindungs- bauelemente fr Lichtwellenleiter- Datenbertragungssysteme Produktnormen Teil 9-2: Bauart MT-RJ zum Anschluss an Einmodenfasern der Kategorie B1.1 nach IEC 60793-2 This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to comply with the CEN/CENELEC

12、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENE

13、LEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.

14、 CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swe

15、den, Switzerland and United Kingdom. EN 50377-9-2:2004 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the Unique Acceptance Procedure and was approv

16、ed by CENELEC as EN 50377-9-2 on 2003-11-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-11-01 - latest date by which the national standards conflicting with the EN

17、 have to be withdrawn (dow) 2006-11-01 _ - 3 - EN 50377-9-2:2004 Connector sets and interconnection components to be used in optical fibre communication systems - Product specifications Part 2-9: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre Part 9-2: Type MT-RJ terminated on I

18、EC 60793-2 category B1.1 singlemode fibre Description Performance Coupling mechanism: latched push-pull Configuration: plug/adaptor/plug Fibre category: IEC 60793-2 T Type B1 Cable type: See Table 2 Application: Attenuation grades: (Random mate) Grade P Return loss grade: Customer premises IEC categ

19、ory C 97 % 1,00 dB Mean 0,35 dB T 35 dB Normative references: EN 50173 Information technology - Generic cabling systems EN 60793-2 Optical fibres - Part 2: Product specification EN 61300 Series Basic test and measurement procedures ISO/IEC IS11801 Information technology - Generic cabling for custome

20、r premises IEC 60794-2 Optical fibre cables - Part 2: Product specifications IEC 61753-1 Performance standard - Part 1: General and guidance IEC 61753-3-3 Performance standard - Part 3-3: Fibre optic connectors terminated on multimode fibre category C controlled environment IEC 61754-18 Fibre optic

21、connector interfaces - Part 18: Type the MT_RJ family Outline and maximum dimensions: Min. Min. 67 Ref 67 Ref R 25 R 25EN 50377-9-2:2004 - 4 - Contents 1 Scope.5 1.1 Product definition.5 1.2 Intermateability 5 1.3 Operating environment5 1.4 Reliability .5 1.5 Quality assurance5 2 Normative reference

22、s.5 3 Description6 3.1 Plug .6 3.2 Adaptor6 3.3 Materials6 3.4 Dimensions6 3.5 Colour and marking.6 4 Variants .7 4.1 Terminated plug 7 4.2 Adaptor7 4.3 Identification of variants.7 5 Dimensional requirements 8 5.1 Outline dimensions.8 5.1.1 Plug variants8 5.1.2 Adaptor variants 9 5.2 Mating face an

23、d other limit dimensions10 5.2.1 Plug.10 5.2.2 Ferrule end face geometry after termination.13 5.2.3 True position of fibre cores after termination 14 5.2.4 Control of fibre axis .15 5.2.5 Adaptor16 6 Tests 17 6.1 Sample size.17 6.2 Test and measurement methods 17 6.3 Test sequence.17 6.4 Pass/fail c

24、riteria .17 7 Test report.17 8 Performance requirements17 8.1 Dimensional requirements.17 8.2 Optical performance requirements18 8.3 Mechanical performance requirements.19 8.4 Environmental performance requirements 22 Annex A (informative) Sample size and product sourcing requirements.24 Bibliograph

25、y24 - 5 - EN 50377-9-2:2004 1 Scope 1.1 Product definition This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode MT-RJ connector set (plug adaptor plug) must meet in order for

26、it to be categorised as an European Standard product. Since different variants are permitted, product-marking details are given in 3.5. 1.2 Intermateability All products conforming to the requirements of this European Standard will intermate and give the specified level of random attenuation and ran

27、dom return loss performance provided the same core size is used. The intention is that this will be true irrespective of the manufacturing source(s) of the product. 1.3 Operating environment The tests selected combined with the severity and duration are representative of a customer premise protected

28、 environment as defined in EN 50173 and ISO/IEC IS 11801 and as specified in category C per IEC 61753-1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this European Standard does not guarantee the reliability of the pro

29、duct. This should be predicted using a recognised reliability assessment programme. 1.5 Quality assurance Compliance with this European Standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. 2 Normative refe

30、rences This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of th

31、ese publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 60793-2 Optical fibres - Part 2: Product specifications EN 61300 Fibre optic interconnec

32、ting devices and passive components EN 61300-2-1 Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-2 Part 2-2: Tests - Mating durability EN 61300-2-4 Part 2-4: Tests - Fibre/cable retention EN 61300-2-5 Part 2-5: Tests - Torsion EN 61300-2-6 Part 2-6: Tests - Tensile strength of coupling mechanism

33、 EN 61300-2-7 Part 2-7: Tests - Bending moment EN 61300-2-12 Part 2-12: Tests - Impact EN 61300-2-17 Part 2-17: Tests - Cold EN 61300-2-18 Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-19 Part 2-19: Tests - Damp heat (steady state) EN 61300-2-21 Part 2-21: Tests - Damp heat (cy

34、cling) EN 61300-2-22 Part 2-22: Tests - Change of temperature EN 61300-2-42 Part 2-42: Tests - Static side load for connectors EN 61300-3-4 Part 3-4: Examinations and measurements - Attenuation EN 61300-3-6 Part 3-6: Examinations and measurements - Return loss EN 61300-3-34 Part 3-34: Examinations a

35、nd measurements - Attenuation of random mated connectors EN 50377-9-2:2004 - 6 - EN 61753-021-2 Part 021-2: Fibre optic connectors terminated on single-mode fibre to category C - Controlled environment IEC 60794-2 Optical fibre cables - Part 2: Indoor optical fibre cables - Sectional specification I

36、EC 61753-1 Fibre optic interconnecting devices and passive components - Part 1: General and guidance for performance standard 3 Description The MT-RJ connector is a single position plug connector of plug adaptor plugconfiguration characterised by a spring loaded butting rectangular ferrule with two

37、optical fibres and a latched push-pull coupling mechanism. The optical alignment mechanism of the connector is of precision pin and hole type. 3.1 Plug The plug features a rectangular composite ferrule and a latch coupling mechanism. A cover (dust cap) to protect the ferrule end face when the connec

38、tor is in the unmated condition shall be provided. 3.2 Adaptor The adaptor has no role in the final alignment mechanism. The mounting style is rectangular flange 2 hole. Covers (dust caps) may be provided to protect each port of the adaptor. 3.3 Materials Materials which are not specified or which a

39、re not specifically described are left to the discretion of the manufacturer. The material for the ferrule is filled composite silica and guide pins are of stainless steel. Alternative materials, which have compatible material properties, may be used as long as end face and performance requirements

40、are met under all conditions as specified in this document. 3.4 Dimensions Outline dimensions and other dimensions necessary to ensure intermateability or which affect performances are specified. All other dimensions are left to the discretion of the manufacturer. Where the mating face limit dimensi

41、ons are not in agreement with the IEC interface this is clearly stated. 3.5 Colour and marking Marking of the product shall be in the following order of precedence: a) identification of manufacturer; b) manufacturing date code: year/week; c) manufacturers part number; d) variant identification numbe

42、r. The following colour scheme is preferred: Table 1- Preferred colour scheme Adaptor Plug Blue Blue - 7 - EN 50377-9-2:2004 4 Variants 4.1 Terminated plug The following variants are permitted: Table 2 - Plug Variants Variant No. Fibre/cable mm Structure Note C01 F 3,7 x 1,9 Reinforced cable Without

43、 pins C01 M 3,7 x 1,9 Reinforced cable With pins C02 F (2,8 0,4) Reinforced cable Without pins C02 M (2,8 0,4) Reinforced cable With pins 4.2 Adaptor The following variant is permitted: Table 3 - Adaptor variants Variant No. Format D01 Rectangular flange 2 hole 4.3 Identification of variants Table 4

44、 - Identification plug variants Variant Number Performance grade (Attenuation/return loss) Identification number C01F PT EN50377-9-2-C01F-PT C01M PT EN50377-9-2-C01M-PT C02F PT EN50377-9-2-C02F-PT C02M PT EN50377-9-2-C02M-PT Table 5 - Identification adaptor variants Variant Number Performance grade

45、(Attenuation/return loss) Identification number D01 - EN50377-9-2-D01 NOTE The adaptor plays no role in the final alignment of this connector style. EN 50377-9-2:2004 - 8 - 5 Dimensional requirements 5.1 Outline dimensions 5.1.1 Plug variants Variant No. C01F OE OA OC OD OBRef. Dimensions Note Min.

46、mm Max. OA - 56,5 OB 9,1 9,3 OC - 35,5 OD - 10,05 OE 7,11 7,19 Figure 2 - 0utline dimensions - Plug C01F / C02F Variant No. C01M OE OD OB OA OCRef. Dimensions Note Min. mm Max. OA - 58,75 OB 9,1 9,3 OC - 38,3 OD - 10,05 OE 7,11 7,19 Figure 3 - Outline dimensions and drawing - Plug C01M / C02M - 9 -

47、EN 50377-9-2:2004 5.1.2 Adaptor variants Variant no. D01 Panel Cut out F D E A B C G H I JRef. Dimensions Note Min. mm Max. A - 10,0 B - 22,0 C - 28,0 D - 18,0 E - 2,3 F - 9,4 G 10,1 10,7 H 18 18,4 I 9,4 10 J 2,0 2,12 x Figure 4 - Outline dimensions Adaptor Panel cut out EN 50377-9-2:2004 - 10 - 5.2

48、 Mating face and other limit dimensions 5.2.1 Plug A A See Figure 6 Mechanical reference plane - 11 - EN 50377-9-2:2004 Ref. Dimensions Note Min. mm. Max. A 4,61 4,69B 7,11 7,19C 2,4 2,5D 4,35 4,45E 3,8 4F 2,597 2,603G 1,45 1,55H 5,3J 0,25 Radius K 5,1 L 9,35 9,75 1 M 7,9 9N 82 88 Degrees P 3,8 4Q 0

49、,35 2,8S 0,8 Radius T 0,9 1,1U 0,15 0,5V 0,4 Diameter W 0,6983 0,698 7 Diameter, 6 AA 0,83 1,2 BB 1,37 1,44CC 0,6 0,87NOTE 1 When Reference L = 9,1 mm the force exerted by the ferrule must be less than or equal to 11,8 N and when Reference L = 9,3 mm the force exerted by the ferrule must be greater than or equal to 7,8 N. NOTE 2 Each pinhole shall accept a gauge as shown in Figure 7 to a depth of 5,5 mm with a maximum forc