BS EN 16271-2012 Value management Functional expression of the need and functional performance specification Requirements for expressing and validating the need to be satisfied witd.pdf

《BS EN 16271-2012 Value management Functional expression of the need and functional performance specification Requirements for expressing and validating the need to be satisfied witd.pdf》由会员分享，可在线阅读，更多相关《BS EN 16271-2012 Value management Functional expression of the need and functional performance specification Requirements for expressing and validating the need to be satisfied witd.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 16271:2012V a l u e m a n a g e m e n t Functional expression of the need and functional performance specification Requirements for expressing and validating the need to be

2、 satisfied within the process of purchasing or obtaining a productCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16271:2012 BRITISH STANDARDNational forewordThis British S

3、tandard is the UK implementation of EN 16271:2012. The UK participation in its preparation was entrusted to T e c h n i c a l Committee MS/2/-/3, Value management.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to in

4、clude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 74624 6 ICS 03.100.10 Compliance with a British Standard cannot confer immunity from legal obligations.T

5、his British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction

6、 or networking permitted without license from IHS-,-,-BS EN 16271:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16271 December 2012 ICS 03.100.10 English Version Value management - Functional expression of the need and functional performance specification - Requirements for expressing and

7、 validating the need to be satisfied within the process of purchasing or obtaining a product Management par la valeur - Expression fonctionnelle du besoin et cahier des charges fonctionnel - Exigences pour lexpression et la validation du besoin satisfaire dans le processus dacquisition ou dobtention

8、 dun produit Value Management - Funktionale Beschreibung der Bedrfnisse und funktionale Leistungsbeschreibung - Anforderungen an das Beschreiben und Validieren der Bedrfnisse, die whrend der Erstellung oder des Erwerbs eines Produktes zu befriedigen sind This European Standard was approved by CEN on

9、 27 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards ma

10、y be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified

11、to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland

12、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: A

13、venue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16271:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking p

14、ermitted without license from IHS-,-,-BS EN 16271:2012EN 16271:2012 (E) 2 Contents Page Foreword 40 Introduction 50.1 General 50.2 Basis .50.3 Organisation and presentation of processes and deliverables 50.4 Functional need analysis (FNA) .60.5 Functional Need Expression (FNE) 70.6 FPS 70.7 Fields o

15、f use .70.8 Relationships with Value Analysis and Design To Objective (DTO) 81 Scope 92 Normative references 93 Terms and definitions 104 Requirements applicable to the deliverable “Functional Need Expression” . 144.1 General . 144.2 Adaptation of the requirements to the FNE usage context 154.3 Glob

16、al Need Definition . 154.3.1 (FNE.01) Global need formulation . 154.3.2 (FNE.02) Product integration into a larger system 164.4 Definition of the strategic elements of the target market and product outlet (Customer side) 164.4.1 (FNE.03) Definition of the economic stakes . 164.4.2 (FNE.04) List of t

17、he inquirers strategic data . 164.4.3 (FNE.05) Fields of processed needs . 174.4.4 (FNE.06) study of each targeted functional coverage. 174.5 Highlighting of Principles/Concepts Selected Beforehand 174.5.1 (FNE.07) Statement of principles or concepts selected beforehand . 174.6 Description of the fu

18、nctions to be provided and their compliance with the constraints 184.6.1 Depth, fineness of analysis (granulation) and field to be covered 184.6.1.1 (FNE.08) Identification of the fineness (granulation) of the Need description . 184.6.2 Life cycle and interacting agents 184.6.2.1 (FNE.09) Selection

19、and description of life cycle phases 184.6.2.2 (FNE.10) List and description of interacting agents 184.6.3 Description of the functions and the constraints 194.6.3.1 (FNE.11) List of user-related functions . 194.6.3.2 (FNE.12) Technical neutrality of user-related functions . 194.6.3.3 (FNE.13) Organ

20、isation of functions . 194.6.3.4 (FNE.14) Function characterisation 204.6.3.5 (FNE.15) Function ranking/weighting . 204.6.3.6 (FNE.16) Identification of mandatory and possible additional characterisation elements . 204.6.3.7 (FNE.17) Possible functional variations . 214.6.3.8 (FNE.18) Organised list

21、 and constraints description 215 Requirements applicable to the deliverable “Functional Performance Specification” . 215.1 General . 215.2 FPS contents . 225.2.1 (FPS.01) Mandatory sections of an FPS . 225.2.2 (FPS.02) Other sections of an FPS 235.2.3 (FPS.03) Structure adaptation to the defined usa

22、ge of the FPS 235.3 Characteristics defining the quality of an FPS 245.3.1 (FPS.04) Compliance with the processes 245.3.2 (FPS.05) Legibility and understanding by the recipient . 24Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or

23、 networking permitted without license from IHS-,-,-BS EN 16271:2012EN 16271:2012 (E) 3 5.3.3 (FPS.06) Capacity to support the usage phase 246 Requirements applicable to the three processes (the FNA process, the process for the drawing up of the FPS, FPS utilisation process) . 246.1 General . 246.2 C

24、ommon requirements applicable to the three processes . 256.2.1 (PROC.01) Framing of the subject of the action 256.2.2 (PROC.02) Supported decision for starting an action . 256.2.3 (PROC.03) Mandate of the person in charge of the action 256.2.4 (PROC.04) Mobilisation of resources and implementation o

25、f an operational structure 266.2.5 (PROC.05) Search for information and consolidation . 266.2.6 (PROC.06) Handling of possible conflicts or contradictions 266.2.7 (PROC.07) Traceability of the action . 266.3 Particular requirements applicable to the FNE generation process: Functional Need Analysis 2

26、66.3.1 (PROC.08) Adaptation of the resources to the need to be described 266.3.2 (PROC.09) FNE validation . 276.4 Particular requirements applicable to the drawing up process of the functional performance specification 276.4.1 General . 276.4.2 (PROC.10) FPS integration into the process used to obta

27、in a product . 276.4.3 (PROC.11) Selection of the FNE elements to be integrated into the FPS 276.4.4 (PROC.12) Transmissibility to a third party 286.4.5 (PROC.13) FPS validation . 286.5 Particular requirements applicable to the process implemented to make use of the functional performance specificat

28、ion . 286.5.1 General . 286.5.2 (PROC.14) Search for and selection of potential providers 296.5.3 (PROC.15) FPS appropriation by a provider . 296.5.4 (PROC.16) Drawing up of the final version of the FPS 296.5.5 (PROC.17) Suggestion processing recording 296.5.6 (PROC.18) Intellectual property, rights

29、 of the partners . 306.5.7 (PROC.19) Arbitration processing . 306.5.8 (PROC.20) Examination of proposals 30Annex A (informative) The variety of situations where FNE and FPS can be used . 31A.1 General . 31A.2 Universality 31A.3 Initial condition of the object under study 31A.4 Use of the FNA and FNE

30、 in a VA approach. 32A.5 Use of the FNE and the FPS in the process used to obtain a product 32A.6 Use of the FPS with Design To Objective . 33A.7 Relationships with other methods . 33Annex B (informative) Conditions of use of deliverables . 34B.1 Background for the drawing up of a FNE . 34B.2 Variet

31、y of FPS (or FNE) usage cases 34B.3 Compatibility with the rules applicable to public contracts . 35Bibliography 36Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16271:201

32、2EN 16271:2012 (E) 4 Foreword This document (EN 16271:2012) has been prepared by Technical Committee CEN/TC 279 “Value management, value analysis, functional analysis”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publi

33、cation of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall

34、not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

35、k, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright Europe

36、an Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 16271:2012EN 16271:2012 (E) 5 0 Introduction 0.1 General This European Standard states the conditions for the successful implementation of t

37、he Functional Need Analysis, Functional Need Expression and Functional Performance Specification and determines the compliance requirements for the parties involved. It extends the generic standard on Value Management, EN 12973. It separately presents the requirements applicable to the processes tha

38、t have to be implemented and those applicable to the deliverables derived from these processes. 0.2 Basis In highly competitive markets, the durability and the development of organisations depend on their capacity to provide competitive products which are best suited to satisfy the need, whether exp

39、ressed or implicit, of the users. The statement of the need in a functional form, i.e. in terms of purpose, without reference to solutions (technical, administrative, procedural, and organisational, etc.) likely to satisfy it, ensures there is every chance that competitive and innovative solutions w

40、ill emerge at the design stage. The statement of the need in a functional form is essential. It permits the expression of the: reference of this need in validated terms (in terms of obligations, expected services, rather than in terms of means) which can be used to control the evolution of this refe

41、rence at the later stages of the products life; level of importance of the main requirements which make up the cost of a product. Using a structured need statement approach in a functional form promotes the: offer of competitive and innovative products; mobilisation of all the interested parties to

42、obtain a unified expression of the need which can be used at each step - from the development to the evaluation of offers satisfying the same need; dialogue between the partners, while respecting the responsibilities of each partner and with a clearer relationship between the customer and the provid

43、er. This European Standard addresses the quality of specification under the responsibility of the enquirer, the handling of the customer/provider relationship and the search for the optimum solution in relation to the expressed need. The standard also addresses the performance levels and the grade o

44、f quality required by the enquirer. 0.3 Organisation and presentation of processes and deliverables Figure 1 below shows schematically the relationship between the three key processes (Functional Need Analysis (FNA) process, the Process for drawing up the Functional Performance Specification (FPS),

45、and the FPS utilisation process: The Functional Need Analysis (FNA) process: this enables the defining of the result named Functional Need Expression (FNE). The process for the drawing up of the Functional Performance Specification (FPS) from the FNE: this process generates a document (FPS) used wit

46、hin the framework of external enquiries, calls for tenders, the Design To Objective (DTO) approach, or internally by certain organisations. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license fro

47、m IHS-,-,-BS EN 16271:2012EN 16271:2012 (E) 6 The FPS utilisation process: this enables, from the initial FPS, a stabilised and final version of the selected need (FPS reference version) to be defined so that the future product shall satisfy. Figure 1 Process organisation and relations between deliverables Annex B proposes a detailed presentation of the processes and deliverables highlighting the respective roles of the owner or project manager and of designers/producers. 0.4 Functional need analysis (FNA) The FNA is a process which applies to a physical object, as well as an organis