BS EN 14258-2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature《结构粘合剂 短期或长期暴露于特定温度条件.pdf

《BS EN 14258-2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature《结构粘合剂 短期或长期暴露于特定温度条件.pdf》由会员分享，可在线阅读，更多相关《BS EN 14258-2004 Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature《结构粘合剂 短期或长期暴露于特定温度条件.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 14258:2004 Structural adhesives Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature The European Standard EN 14258:2004 has the status of a British Standard ICS 83.180 BS EN 14258:2004 This British Standard wa

2、s published under the authority of the Standards Policy and Strategy Committee on 30 November 2004 BSI 30 November 2004 ISBN 0 580 44920 3 National foreword This British Standard is the official English language version of EN 14258:2004. The UK participation in its preparation was entrusted to Techn

3、ical Committee PRI/52, Adhesives, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be foun

4、d in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are respo

5、nsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep t

6、he UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed i

7、n this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN14258 November2004 ICS83.180 Englishversion StructuraladhesivesMechanicalbehaviourofbondedjoints subjectedtoshortandlongtermsexposur

8、eatspecified conditionsoftemperature AdhsifsstructurauxComportementmcaniquedes assemblagescollssoumisuneexpositioncourtetlong termesdesconditionsdetempraturespcifies StrukturklebstoffeMechanischesVerhaltenvon Klebverbindungenbeikurzzeitigeroderlangzeitiger BeanspruchungbeifestgelegterTemperatur This

9、EuropeanStandardwasapprovedbyCENon2September2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeo

10、btainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial vers

11、ions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEAN

12、COMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN14258:2004:EEN 14258:2004 (E) 2 Contents Page Foreword3 Introducti

13、on .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Safety 5 5 Apparatus .5 6 Specimens 6 7 Procedure .6 7.1 Temperature dependent test 6 7.2 Long term thermal exposure test.6 8 Report .6 EN 14258:2004 (E) 3 Foreword This document (EN 14258:2004) has been prepared by Technical Comm

14、ittee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the late

15、st by May 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, I

16、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14258:2004 (E) 4 Introduction The mechanical properties of adhesively bonded joints are strongly dependent on the temperature at which they are det

17、ermined, and could be altered when subjected to continuous exposures at specified conditions of time and temperature. This document specifies how adhesively bonded joints can be characterised: a) at different temperatures; b) after having been submitted to continuous exposure under specified conditi

18、ons of time and temperature. Characterisation can be determined on different standardised shear specimens according to the type of adhesive being assessed and the purpose of the characterisation itself (comparison or design purposes). However, this standard should not be considered to provide inform

19、ation concerning the general suitability of a structural adhesive for a particular application. Due to the diversity of possible applications and the interactive influences of different adhesive and substrate properties, it is not appropriate to define or determine exposure performance limits. EN 14

20、258:2004 (E) 5 1 Scope This document specifies guidelines for the evaluation of the mechanical behaviour of structural adhesively bonded joints subjected to short and long term exposure at specified conditions of temperature (heat resistance). This is determined by means of measurement of the shear

21、properties of structural adhesively bonded joints. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

22、any amendments) applies. EN 923:1998, Adhesives Terms and definitions. EN 1465, Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies (ISO 4587:1979 modified). EN 14869-2, Structural adhesives Determination of shear behaviour of structural bonds Part 2 : Thick adh

23、erends shear test (ISO 11003-2:2001, modified). EN ISO 9142, Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003). ISO 10123, Adhesives Determination of shear strength of anaerobic adhesives using pin-and-collar specimens. 3 Terms and de

24、finitions For the purposes of this document, the terms and definitions given in EN 923:1998 apply. 4 Safety People using this standard shall be familiar with normal laboratory practice. This standard does not purport to address all safety problems, if any, associated with its use. It is the responsi

25、bility of the user to establish health and safety practices and to ensure compliance with any European or regulatory conditions. 5 Apparatus 5.1 Apparatus required to test the specimens at room temperature, in accordance with EN 1465, EN 14869-2 and ISO 10123. 5.2 Tensile test machine, for short ter

26、m testing equipped with an environmental chamber suitable for conditioning and testing the specimens at the desired temperature. 5.3 Environmental chamber, for thermal ageing, complying with the relevant standard or required specification. EN 14258:2004 (E) 6 6 Specimens Specimens shall be prepared

27、in accordance with EN 1465, ISO 10123 or EN 14869-2 as appropriate. Before testing, or initiating the thermal ageing programme, specimens shall be conditioned for 1 day at (23 2) C and a relative humidity of (50 5) %, in accordance with EN ISO 9142. 7 Procedure 7.1 Temperature dependent test For des

28、ign purposes: only EN 14869-2 shall be used; anaerobic adhesives shall only be assessed in accordance with ISO 10123. all other adhesives shall be assessed in accordance with EN 1465 ; Test temperatures should be chosen according to the specific application and according to EN ISO 9142. The specimen

29、s shall be held at the relevant temperature until temperature equilibrium is reached. The tests shall be monitored in accordance with the standard used. 7.2 Long term thermal exposure test For design purposes, only EN 14869-2 shall be used. For comparison purposes: anaerobic adhesives shall only be

30、assessed in accordance with ISO 10123; all other adhesives shall be assessed in accordance with EN 1465 ; Unaged reference specimens shall be prepared and evaluated at (23 2) C. NOTE The tests described in 7.1 can be used as guidance for the selection of exposure temperatures. An exposure time shall

31、 be chosen according to the specific application. The specimens shall be conditioned at the desired temperatures in a suitable environmental chamber (5.3), accurately monitored and controlled for the desired periods of time. After thermal ageing, all specimens shall be conditioned at (23 2) C and a

32、relative humidity of (50 5) % for 24 h prior to testing. The shear specimens shall then be evaluated according to the standard test methods at (23 2) C. 8 Report For the temperature dependent tests the test temperature shall be reported, in addition to the information required for the test report(s)

33、 for the test standard used. Long term thermal exposure time and temperature shall be reported, in addition to the information required for the test report(s) for the test standard used. blankBS EN 14258:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the indep

34、endent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that the

35、y possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the i

36、dentity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, inter

37、national and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to sup

38、ply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various

39、BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive subs

40、tantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be fou

41、nd at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyrigh

42、t, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the sta

43、ndard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.