BS EN 13141-8-2014 Ventilation for buildings Performance testing of components products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ve.pdf

《BS EN 13141-8-2014 Ventilation for buildings Performance testing of components products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ve.pdf》由会员分享，可在线阅读，更多相关《BS EN 13141-8-2014 Ventilation for buildings Performance testing of components products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ve.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 13141-8:2014Ventilation for buildings Performance testing ofcomponents/products forresidential ventilationPart 8: Performance testing of un-ducted mechanical supply and exhaustventilation units (including heat recovery)for mechanical ventilation systems intendedfor a s

2、ingle roomBS EN 13141-8:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13141-8:2014.It supersedes BS EN 13141-8:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RHE/2, Ventilation for buildings, heating an

3、d hot waterservices.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Publi

4、shed by BSI StandardsLimited 2014ISBN 978 0 580 76416 5ICS 91.140.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2014.Amendments issued since publicatio

5、nDate Text affectedBS EN 13141-8:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13141-8 June 2014 ICS 91.140.30 Supersedes EN 13141-8:2006English Version Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-d

6、ucted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room Ventilation des btiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 8 : Essais de performance des units de sou

7、fflage et dextraction (y compris la rcupration de chaleur) pour les systmes de ventilation mcaniques non raccords prvus pour une pice Lftung von Gebuden - Leistungsprfung von Bauteilen/Produkten fr die Lftung von Wohnungen - Teil 8: Leistungsprfung von mechanischen Zuluft- und Ablufteinheiten ohne L

8、uftfhrung (einschlielich Wrmerckgewinnung) fr ventilatorgesttzte Lftungsanlagen von einzelnen Rumen This European Standard was approved by CEN on 6 February 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

9、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English,

10、French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulga

11、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur

12、key and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

13、Ref. No. EN 13141-8:2014 EBS EN 13141-8:2014EN 13141-8:2014 (E) 2 Contents Page Foreword 4 Introduction . 5 1 Scope 7 2 Normative references 7 3 Terms, definitions and classification 8 3.1 Terms and definitions . 8 3.2 Classification 10 4 Symbols and abbreviations 10 5 Test methods 12 5.1 General 12

14、 5.2 Performance testing of aerodynamic characteristics 12 5.2.1 General 12 5.2.2 Internal leakages and mixing 12 5.2.3 Air flow 16 5.2.4 In/out airtightness 17 5.2.5 Filter bypass . 17 5.3 Specific performance testing of aerodynamic characteristics for alternating ventilation unit including a stora

15、ge type heat exchangers 17 5.3.1 Reference air flow 17 5.3.2 Leakages . 19 5.3.3 In/out airtightness 20 5.4 Performance testing of thermal characteristics . 20 5.4.1 Temperature and humidity ratios on supply air side (mandatory measurement) 20 5.4.2 Temperature and humidity ratios on exhaust air sid

16、e (optional measurement) . 20 5.4.3 Test requirements 20 5.4.4 Test operating conditions . 21 5.4.5 Temperature conditions 21 5.4.6 Test procedure . 22 5.4.7 Test model for testing alternating ventilation units . 23 5.5 Effective power input 25 6 Classification 25 6.1 Leakage classification . 25 6.2

17、 Airflow sensitivity classification 25 6.3 Indoor/outdoor airtightness of the complete unit 26 7 Requirements . 26 8 Calculations 27 8.1 General calculations 27 8.2 Special calculations for alternating heat exchangers 28 9 Performance testing of acoustic characteristics . 29 9.1 General 29 9.2 Radia

18、tive sound power in the indoor or outdoor space 29 9.2.1 General 29 9.2.2 Reverberant room method 29 9.2.3 Anechoic or semi-anechoic room method 30 9.2.4 Free field method . 30 9.3 Airborne sound insulation 31 10 Test results . 31 10.1 Test report 31 BS EN 13141-8:2014EN 13141-8:2014 (E) 3 10.2 Prod

19、uct specifications 32 10.3 Additional information related to the performance of the product 32 10.4 Leakages 32 10.5 Air flow 33 10.6 Effective power input 33 10.7 Temperature and humidity ratios . 33 10.8 Acoustic characteristics . 34 11 Cleaning and maintenance . 35 Annex A (informative) Test layo

20、uts . 36 Annex B (normative) Pressure leakage test method . 38 B.1 External leakage test . 38 B.2 Internal leakage test 38 Annex C (normative) Indoor mixing . 40 C.1 General 40 C.2 Determination of indoor mixing - First test . 40 C.3 Determination of indoor mixing - Second test . 40 C.4 Indoor mixin

21、g calculation . 40 Bibliography 41 BS EN 13141-8:2014EN 13141-8:2014 (E) 4 Foreword This document (EN 13141-8:2014) has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national

22、 standard, either by publication of an identical text or by endorsement, at the latest by September 2014, and conflicting national standards shall be withdrawn at the latest by September 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of pate

23、nt rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13141-8:2006. In comparison to EN 13141-8:2006 the following changes have been made: alternating ventilation units including a storage type heat exchangers have been

24、 included; measurement of the deviation of air flow rate due to faade pressures in normal use has been introduced; temperature conditions have been modified to be the same as in EN 13141-7 that is to say 7 C / 20 C. EN 13141 consists of the following parts, under the general title Ventilation for bu

25、ildings Performance testing of components/products for residential ventilation: Part 1: Externally and internally mounted air transfer devices; Part 2: Exhaust and supply air terminal devices; Part 3: Range hoods for residential use; Part 4: Fans used in residential ventilation systems; Part 5: Cowl

26、s and roof outlet terminal devices; Part 6: Exhaust ventilation system packages used in a single dwelling; Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings; Part 8: Perfo

27、rmance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room; Part 9: Externally mounted humidity controlled air transfer device; Part 10: Humidity controlled extract air terminal device. Part 11:

28、Positive pressure ventilation systems. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugo

29、slav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13141-8:2014EN 13141-8:2014 (E) 5 Introduc

30、tion This European Standard specifies methods for the performance testing of components used in residential ventilation systems to establish the performance characteristics as identified in EN 13142 1. This European Standard incorporates many references to other European and International Standards,

31、 especially on characteristics other than the aerodynamic characteristics, for instance on acoustic characteristics. In most cases some additional tests or some additional conditions are given for the specific use in residential ventilation systems. This European Standard can be used for the followi

32、ng applications: laboratory testing; attestation purposes. The position of this European Standard in the field of standards for the mechanical building services is shown in Figure 1. BS EN 13141-8:2014EN 13141-8:2014 (E) 6 Figure 1 Position of EN 13141-8 in the field of the mechanical building servi

33、ces BS EN 13141-8:2014EN 13141-8:2014 (E) 7 1 Scope This European Standard specifies the laboratory test methods and test requirements for the testing of aerodynamic, thermal and acoustic performance, and the electrical power of an un-ducted mechanical supply and exhaust ventilation unit used in a s

34、ingle room. The purpose of this European Standard is not to consider the quality of ventilation but to test the performance of the equipment. In general, a ventilation unit contains: supply and exhaust air fans; air filters; air to air heat exchanger or air storage mass for exhaust air heat and humi

35、dity recovery; control system; inlet and outlet grilles. Such equipment can be provided in more than one assembly, the separate assemblies of which are designed to be used together. Such equipment can contain alternating heat exchangers which provide separate supply and exhaust air flows. In certain

36、 cases, i.e. alternating ventilation unit, the manufacturer may recommend that the equipment can be installed in such a way that it serves more than one room. For the purpose of this European Standard, these products are assessed in a single room. This European Standard does not deal with ducted uni

37、ts or units with heat pumps. Safety requirements are given in EN 60335-2-80:2003 2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For un

38、dated references, the latest edition of the referenced document (including any amendments) applies. EN 306, Heat exchangers - Methods of measuring the parameters necessary for establishing the performance EN 779, Particulate air filters for general ventilation - Determination of the filtration perfo

39、rmance EN 12792:2003, Ventilation for buildings - Symbols, terminology and graphical symbols EN 13141-4, Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems EN ISO 717-1, Acoustics - Rating of sound

40、 insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1) EN ISO 3741, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741) EN ISO 3743-1, Acou

41、stics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1) BS EN 13141-8:2014EN 13141-8:2014 (E) 8 EN ISO 3743-2,

42、Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2) EN ISO 3744, Acoustics - Determination of sound power levels and sound ener

43、gy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744) EN ISO 3745, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and

44、 hemi-anechoic rooms (ISO 3745) EN ISO 9614-1, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1) EN ISO 9614-2, Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2:

45、Measurement by scanning (ISO 9614-2) EN ISO 10140-1:2010, Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2010) EN ISO 10140-2, Acoustics - Laboratory measurement of sound insulation of building elements - Par

46、t 2: Measurement of airborne sound insulation (ISO 10140-2) EN ISO 10140-5, Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5) 3 Terms, definitions and classification For the purpose of this document, the

47、 terms and definitions given in EN 12792:2003 and the following apply. 3.1 Terms and definitions 3.1.1 external leakage leakage to or from the air flowing inside the casing of the unit to or from the air external to the equipment under test 3.1.2 internal leakage leakage inside the unit between the

48、exhaust and the supply air flows 3.1.3 filter bypass leakage air bypass around filter cells 3.1.4 indoor/outdoor airtightness maximum of air flow at 20 Pa and + 20 Pa corresponding to the setting when the fans are off 3.1.5 outdoor mixing mixing of the two airflows external to the equipment under te

49、st between discharge and intake ports at outdoor terminal points caused by short circuiting 3.1.6 indoor mixing mixing of the two airflows under test between discharge and intake ports at indoor terminal points caused by short circuiting BS EN 13141-8:2014EN 13141-8:2014 (E) 9 3.1.7 maximum air volume flow air flow corresponding to that at the maximum setting and at no pressure difference, 0 Pa, between indoor and outdoor Note 1 to entry: If the supply and exhaust air volume flows are different, then the