BS EN 12966-3-2005 Road vertical signs - Variable message traffic signs - Factory production control《道路垂直标志 可变信息交通标志 工厂生产控制》.pdf

《BS EN 12966-3-2005 Road vertical signs - Variable message traffic signs - Factory production control《道路垂直标志 可变信息交通标志 工厂生产控制》.pdf》由会员分享，可在线阅读，更多相关《BS EN 12966-3-2005 Road vertical signs - Variable message traffic signs - Factory production control《道路垂直标志 可变信息交通标志 工厂生产控制》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 12966-3:2005 Road vertical signs Variable message traffic signs Part 3: Factory production control The European Standard EN 12966-3:2005 has the status of a British Standard ICS 93.080.30 Licensed Copy: Wang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIBS E

2、N 12966-3:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 6 May 2005 BSI 6 May 2005 ISBN 0 580 45986 1 National foreword This British Standard is the official English language version of EN 12966-3:2005. The UK participation in its prepa

3、ration was entrusted by Technical Committee B/509, Road equipment, to Subcommittee B/509/3, Construction of road traffic signs, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standard

4、s which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This pu

5、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internat

6、ional/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN titl

7、e page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NOR

8、MEEUROPENNE EUROPISCHENORM EN129663 April2005 ICS93.080.30 Englishversion RoadverticalsignsVariablemessagetrafficsignsPart3: Factoryproductioncontrol SignauxdesignalisationroutireverticalePanneaux messagesvariablesPartie3:Facteurdeproductionen usine VertikaleVerkehrszeichenWechselverkehrszeichenTeil

9、 3:WerkseigeneProduktionskontrolle ThisEuropeanStandardwasapprovedbyCENon15March2005. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencescon

10、cernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretaria

11、thasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,S

12、witzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN129663:2005:E Licensed Copy: W

13、ang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIEN 12966-3:2005 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 System requirements 4 5 Common requirements .8 6 Product testing and evaluation 8 Bibliography 9 Licensed Copy: Wang Bin,

14、 na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIEN 12966-3:2005 (E) 3 Foreword This document (EN 12966-3:2005) has been prepared by Technical Committee CEN/TC 226 “Road equipment”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national

15、standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by October 2005. This European Standard has been prepared under a mandate given to CEN by the European Commission and the Europea

16、n Free Trade Association, and supports essential requirements of EU Directive(s). This document consists of the following Parts under the general title: Road vertical signs - Part 1 : Variable message traffic signs Part 1: Product standard - Part 2 : Variable message traffic signs Part 2: Initial ty

17、pe testing - Part 3 : (this part) Variable message traffic signs Part 3: Factory production control It derives from performance requirements and test methods published in CEN, CENELEC, CIE and ISO documents together with standards of the CEN member organisations. According to the CEN/CENELEC Interna

18、l Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

19、nds, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIEN 12966-3:2005 (E) 4 1 Scope This document specifies the requirements for Factory Production Control (FPC) manufactu

20、rers of variable message signs and is designed to be read in conjunction with Part 1. The requirements described in this document are applicable to the products under the scope of EN 12966-1. This document specifies which sorts of parameters and tests have to be taken into consideration within the F

21、PC system, but leaves the precise test methods to be applied to be chosen depending on the manufacturers facilities and production methods. The precise parameters and methods will be found in the manufacturers written FPC procedures. 2 Normative references The following referenced documents are indi

22、spensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12966-1:2005, Road vertical signs Variable message traffic signs Part 1: Product standard

23、 EN 12899-1:2001, Fixed, vertical road traffic signs Part 1: Fixed signs EN ISO 9000:2000, Quality management systems Fundamentals and vocabulary (ISO 9000:2000) EN ISO 9001, Quality management systems Requirements (ISO 9001:2000) 3 Terms and definitions For the purposes of this document, the terms

24、and definitions given in EN ISO 9000:2000 and in EN 12966- 1:2005 and the following apply. 3.1 Factory Production Control (FPC) permanent internal control of production exercised by the product manufacturer 3.2 batch quantity of a product manufactured with no change in raw material, equipment, setti

25、ngs or operation as defined in the FPC system manual of the manufacturer 3.3 individual (and non-series) where the manufacturing process is different to the manufacturers usual process 4 System requirements 4.1 General The continuing conformity of VMS test module to the ITT, the requirements of this

26、 document and with the stated values (including classes) shall be demonstrated by factory production control. NOTE Initial type testing (ITT) is covered by EN 12966-2. Licensed Copy: Wang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIEN 12966-3:2005 (E) 5 All the elements, require

27、ments and provisions adopted by the manufacturer shall be documented in a systematic manner in the form of written policies and procedures. This production control system documentation shall ensure a common understanding of quality assurance and enable the achievement of the required product charact

28、eristics and the effective operation of the production control system to be checked. The manufacturer shall exercise a permanent system of FPC. This shall include testing of samples in accordance with a prescribed test plan defined in this part of this document. The manufacturer shall be responsible

29、 for organising the effective implementation of the FPC system. Tasks and responsibilities in the production control organisation shall be documented and this documentation shall be kept up-to-date and reviewed for effectiveness at least once per year which shall be recorded. Manufacturers having an

30、 FPC system which complies with EN ISO 9001 and which are product specific to this standard are deemed to satisfy the requirements of this document. In each factory, the manufacturer may delegate action to a person having the necessary authority to: a) monitor procedures to demonstrate conformity of

31、 the product at appropriate stages; b) identify and record any instance of non-conformity; c) monitor procedures to correct instances of non-conformity. The manufacturer shall draw up and keep up-to-date documents defining the FPC system which he applies. The manufacturers documentation and procedur

32、es shall be appropriate to the product and manufacturing process. All FPC systems shall achieve and maintain an appropriate level of confidence that the product is in conformity with the ITT. 4.2 Factory Production Control system The factory production control system shall include at least the neces

33、sary procedures for: a) specification and verification of raw materials and relevant components; b) controls and tests to be carried out during manufacture; c) verifications and tests carried out on finished products in accordance with the test regime specified below; d) control of the necessary ins

34、tallations, equipment and trained personnel to execute the tests on the raw materials and components if necessary, the tests during production and the final quality control tests as specified below; e) operation maintenance and calibration of appropriate test and manufacturing equipment by qualified

35、 personnel. NOTE The manufacturer may arrange subcontracting agreements with one or more organizations or persons having the necessary skills and equipment in order to perform the above tasks. The test methods to be applied and the tolerances for the results of all the tests used shall be documented

36、 in the FPC system. The frequency of testing shall be in accordance with the test plan of the manufacturer, or as specified in Table 1, and shall be carried out according to the test methods indicated in this document. These methods shall be direct methods. In the case of certain characteristics, in

37、direct test methods may be used if the manufacturer is satisfied that the other characteristic, which is more practicable to measure, will insure conformity with this document. The manufacturer shall establish procedures to ensure that the production tolerances allow for the VMS performances to be i

38、n conformity with the declared values, derived from initial type testing. Licensed Copy: Wang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontrolled Copy, (c) BSIEN 12966-3:2005 (E) 6 The characteristics, and the means of verification, are given in the Table 1. Table 1 - Minimum frequency of testing fo

39、r product testing and evaluation as part of FPC Property Clause of EN 12966- 1:2005, indicating the relevant test method (if any) Minimum frequency of tests Minimum number of samples 8.3.2.1 Loads Resistance to horizontal loads 8.3.2.2 Deflections Continuously during production All Impact resistance

40、 8.3.4 Impact resistance (raw material monitoring) Per batch 5 %, minimum 1 8.4.2 Electrical safety Electrical requirements 9.1.3.1 Function test Continuously during production All Chromaticity co-ordinates 7.2 Colour Per batch 5 %, minimum 1 Retro-reflectivity (if applicable) EN 12899-1:2001, 5.2.2

41、 By component manufacturers declaration or per batch 5 %, minimum 1 7.3 Luminance Per batch 5 %, minimum 1 Optical performance (Luminance) 7.6 Uniformity-visual check Continuously All Durability 8.2.4 Degrees of protection provided by enclosures (water ingress) Per batch All The manufacturer shall r

42、ecord the results of the tests specified above. These records shall at least include the following information: identification of the VMS tested; date of sampling and testing if applicable (the information shall reflect the time difference between manufacturing and testing); test methods performed;

43、test results; name(s) of the person(s) performing the test(s). 4.3 Records Records shall include everything that is necessary to demonstrate control of the raw materials and constituents, the production process and the final product. Licensed Copy: Wang Bin, na, Fri Aug 05 06:59:37 BST 2005, Uncontr

44、olled Copy, (c) BSIEN 12966-3:2005 (E) 7 Records of the ITT and the test module shall be maintained for at least ten years. The description of the product, date of manufacture, test method adopted, test result and acceptance criteria shall be entered in the register under the signature of the person

45、(s) responsible for control and who carried out the verification. In case of non-conformity and/or complaint: the corrective actions, taken to rectify the situation, shall be recorded in the register. The manufacturer, or his agent, shall keep full records of individual products (or batches), includ

46、ing their related manufacturing details and characteristics, and keep a record of to whom these products were first sold. These records shall be maintained for at least ten years. 4.4 Treatment of non-conforming products If control or test results show that the product does not meet the requirements

47、, the necessary corrective action shall be immediately taken. Products (or batches) not conforming shall be quarantined and properly identified. Once the non-conformance has been corrected the product shall be re-tested. If it is not practicable to correct the fault the product shall be rejected unl

48、ess the customer accepts it in a repaired or uncorrected form. The customers acceptance shall be verified in writing. For any product delivered before the tests results are available, a procedure and record shall be maintained for notifying customers. A recall procedure shall be provided for any product, which is found to be not in conformity with the ITT. 4.5 Traceability The manufacturer shall establish and maintain documented procedures for identifying the product or the constituent by suitable means during all stages of production. The ma