BS EN 10169-2010 Continuously organic coated (coil coated) steel flat products Technical delivery conditions《连续有机涂层(盘绕涂层)扁平钢轧材 技术交货条件》.pdf

《BS EN 10169-2010 Continuously organic coated (coil coated) steel flat products Technical delivery conditions《连续有机涂层(盘绕涂层)扁平钢轧材 技术交货条件》.pdf》由会员分享，可在线阅读，更多相关《BS EN 10169-2010 Continuously organic coated (coil coated) steel flat products Technical delivery conditions《连续有机涂层(盘绕涂层)扁平钢轧材 技术交货条件》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 10169:2010Continuously organic coated(coil coated) steel flat products Technical delivery conditionsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49,

2、 Uncontrolled Copy, (c) BSIBS EN 10169:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 10169:2010. Itsupersedes BS EN 10169-1:2003, BS EN 10169-2:2006, and BS EN10169-3:2003 which are withdrawn.The UK participation in its preparation was entrusted to Techni

3、calCommittee ISE/109, Coated and Uncoated Flat Products to be Usedfor Cold Forming.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its co

4、rrectapplication. BSI 2010 ISBN 978 0 580 64276 0 ICS 25.220.60; 77.140.50 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2010. Amendments issued sinc

5、e publicationDate T e x t a f f e c t e dLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49, Uncontrolled Copy, (c) BSIBS EN 10169:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10169 October 2010 ICS 25.220.60; 77.140.50 Supersedes EN 10169-1:2003, EN 10169-2:2006, EN

6、 10169-3:2003English Version Continuously organic coated (coil coated) steel flat products - Technical delivery conditions Produits plats en acier revtus en continu de matires organiques (prlaqus) - Conditions techniques de livraison Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherze

7、ugnisse aus Stahl - Technische Lieferbedingungen This European Standard was approved by CEN on 7 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter

8、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

9、slation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran

10、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

11、 NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10169:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49, Uncontrolled Copy, (c) BSIBS E

12、N 10169:2010EN 10169:2010 (E) 2 Contents Page Foreword 31 Scope 4 2 Normative references 43 Terms and definitions .64 Designation . 115 Information to be supplied by the purchaser 125.1 Mandatory information . 125.2 Options 136 Requirements 136.1 General . 136.1.1 Steel substrates 136.1.2 Organic co

13、atings. 146.1.3 Manufacturing process 156.2 General coating properties 156.2.1 General . 156.2.2 Coating thickness and tolerances 166.2.3 Appearance . 176.2.4 Adhesive strength after cupping or bending . 186.2.5 Coating hardness 186.2.6 Other coating and performance properties . 186.3 Special coatin

14、g properties . 186.3.1 General . 186.3.2 Product flexibility 186.3.3 Durability . 196.4 Freedom of defects . 227 Inspection 227.1 Types of inspection and inspection documents . 227.2 Test units . 227.3 Type and number of tests 227.4 Sampling 237.5 Test methods . 237.5.1 General . 237.5.2 Coating thi

15、ckness . 237.5.3 Colour and colour difference . 237.5.4 Gloss 247.5.5 Adhesive strength/flexibility 247.5.6 Inspection on defects . 247.5.7 Coating hardness 247.5.8 Testing on durability 257.6 Retests . 278 Marking 279 Packing and dispatch . 2710 Storage . 27Annex A (informative) Types of ambience .

16、 28Annex B (informative) Coating materials . 31Annex C (informative) Types of atmosphere (see also EN ISO 12944-2) 32Annex D (informative) Outdoor exposure sites . 33Annex E (informative) Storage 35Bibliography . 36Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49, Uncontrolled

17、 Copy, (c) BSIBS EN 10169:2010EN 10169:2010 (E) 3 Foreword This document (EN 10169:2010) has been prepared by Technical Committee ECISS/TC 109 “Surface coated flat products - Qualities, dimensions, tolerances and specific tests”, the secretariat of which is held by AFNOR. This European Standard shal

18、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document

19、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10169-1:2003, EN 10169-2:2006, EN 10169-3:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of

20、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roma

21、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49, Uncontrolled Copy, (c) BSIBS EN 10169:2010EN 10169:2010 (E) 4 1 Scope This European Standard specifies requirements for continuously organic coated (co

22、il coated) steel flat products. It particularly specifies the performance requirements. The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip). NOTE This document is not applicable to continuously

23、 organic coated flat products made of: tinmill products, electrical steels. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refere

24、nced document (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel EN 10021:2006, General technical delivery requirements for steel and steel products EN 10025-1, Hot-rolled products of structural steels Part 1: General technical delivery conditions EN

25、10025-2, Hot-rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels EN 10048, Hot rolled narrow steel strip Tolerances on dimensions and shape EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels Tolerance

26、s on dimensions and shape EN 10079:2007, Definition of steel products EN 10111, Continuously hot rolled low carbon steel sheet and strip for cold forming Technical delivery conditions EN 10130, Cold rolled low carbon steel flat products for cold forming Technical delivery conditions EN 10131, Cold r

27、olled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming Tolerances on dimensions and shape EN 10139, Cold rolled uncoated mild steel narrow strip for cold forming Technical delivery conditions EN 10140, Cold rolled narrow

28、 steel strip Tolerances on dimensions and shape EN 10143, Continuously hot-dip coated steel sheet and strip Tolerances on dimensions and shape EN 10152, Electrolytically zinc coated cold rolled steel flat products for cold forming Technical delivery conditions EN 10204:2004, Metallic products Types

29、of inspection documents EN 10268, Cold rolled steel flat products with high yield strength for cold forming Technical delivery conditions Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49, Uncontrolled Copy, (c) BSIBS EN 10169:2010EN 10169:2010 (E) 5 prEN 10338:2007, Hot rolled

30、 and cold rolled non-coated flat products of multiphase steels for cold forming Technical delivery conditions EN 10346, Continuously hot-dip coated steel flat products Technical delivery conditions EN 13523-0, Coil coated metals Test methods Part 0: General introduction and list of test methods EN 1

31、3523-1, Coil coated metals Test methods Part 1: Film thickness EN 13523-2, Coil coated metals Test methods Part 2: Specular gloss EN 13523-3, Coil coated metals Test methods Part 3: Colour difference Instrumental comparison EN 13523-4, Coil coated metals Test methods Part 4: Pencil hardness EN 13523

32、-5, Coil coated metals Test methods Part 5: Resistance to rapid deformation (impact test) EN 13523-6, Coil coated metals Test methods Part 6: Adhesion after indentation (cupping test) EN 13523-7, Coil coated metals Test methods Part 7: Resistance to cracking on bending (T-bend test) EN 13523-8, Coil

33、 coated metals Test methods Part 8: Resistance to salt spray (fog) EN 13523-9, Coil coated metals Test methods Part 9: Resistance to water immersion EN 13523-10, Coil coated metals Test methods Part 10: Resistance to fluorescent UV light and water condensation EN 13523-11, Coil coated metals Test me

34、thods Part 11: Resistance to solvents (rubbing test) EN 13523-12, Coil coated metals Test methods Part 12: Resistance to scratching EN 13523-14, Coil coated metals Test methods Part 14: Chalking (Helmen method) EN 13523-15, Coil coated metals Test methods Part 15: Metamerism EN 13523-18, Coil coated

35、 metals Test methods Part 18: Resistance to staining EN 13523-19, Coil coated metals Test methods Part 19: Panel design and method of atmospheric exposure testing EN 13523-21, Coil coated metals Test methods Part 21: Evaluation of outdoor exposure panels EN 13523-22, Coil coated metals Test methods

36、Part 22: Colour difference Visual comparison EN 13523-23, Coil coated metals Test methods Part 23: Colour stability in humid atmospheres containing sulphur dioxide EN 13523-24, Coil coated metals Test methods Part 24: Resistance to blocking and pressure marking EN 13523-25, Coil coated metals Test m

37、ethods Part 25: Resistance to humidity EN 13523-26, Coil coated metals Test methods Part 26: Resistance to condensation of water EN 13523-27, Coil coated metals Test methods Part 27: Resistance to humid poultice (Cataplasm test) EN ISO 2815, Paints and varnishes Buchholz indentation test (ISO 2815:2

38、003) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 30/03/2011 02:49, Uncontrolled Copy, (c) BSIBS EN 10169:2010EN 10169:2010 (E) 6 EN ISO 4618:2006, Paints and varnishes Terms and definitions (ISO 4618:2006) EN ISO 4628-2, Paints and varnishes Evaluation of degradation of coatings Designati

39、on of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering (ISO 4628-2:2003) EN ISO 4628-4, Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform change

40、s in appearance Part 4: Assessment of degree of cracking (ISO 4628-4:2003) EN ISO 4628-5, Paints and varnishes Evaluation of degradation of coatings Designation of quantity an size of defects, and of intensity of uniform changes in appearance Part 5: Assessment of the degree of flaking (ISO 4628-5:2

41、003) EN ISO 8044:1999, Corrosion of metals and alloys Basic terms and definitions (ISO 8044:1999) EN ISO 9227, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227:2006) EN ISO 12944-2:1998, Paints and varnishes Corrosion protection of steel structures by protective paint systems Par

42、t 2: Classification of environments (ISO 12944-2:1998) ISO 4997, Cold-reduced carbon steel sheet of structural quality 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN 10020:2000, EN 10021:2006, EN 10079:2007, EN 10204:2004, EN ISO 4618:2006, EN ISO 804

43、4:1999, EN ISO 12944-2:1998 and the following apply. 3.1 accessibility ease of access to the steel components for the purpose of inspection and maintenance without any work over and above that concerned with routine inspection 3.2 ambience environmental conditions which prevail in the interior of th

44、e building NOTE 1 These conditions determine the corrosivity category of the ambience and include different parameters such as the air temperature, the relative humidity, the operating conditions in the building (e.g. use of aggressive chemical products, refrigerated areas). NOTE 2 It should be note

45、d that the atmosphere surrounding the building can influence the ambience. NOTE 3 Annex A gives an example of classification of types of ambience. 3.3 building interior application application in buildings for which the concerned construction products (i.e. components of the building fabric) are sub

46、mitted to the influence of interior ambiences without significant exposure of any side of the product to the influence of exterior atmospheres NOTE 1 Building products include, for example: liner trays, ribbed profiles for roofing and walling, curved profiles, brake-pressed profiles, interior wall p

47、anels for partitions, ceiling panels, suspended frames (for suspended ceilings), factory foamed (or mineral wool) sandwich panels for cold rooms or rooms with controlled ambience, interior door frames, interior metal doors, interior metal windows. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARD

48、S, 30/03/2011 02:49, Uncontrolled Copy, (c) BSIBS EN 10169:2010EN 10169:2010 (E) 7 NOTE 2 Some coil coated products can be used for interior applications having special performance requirements, e.g. lighting. In such cases, these particular requirements should also be considered in consultation with the manufacturer. NOTE 3 For interior building elements, it is important that the risk of corrosive attack on the reverse side of the element should also be considered. This can be especially important in double-skin assemblies (e.g