BS EN 622-2-2004 Fibreboards - Specifications - Requirements for hardboards《纤维板 规范 硬质纤维板的要求》.pdf

《BS EN 622-2-2004 Fibreboards - Specifications - Requirements for hardboards《纤维板 规范 硬质纤维板的要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 622-2-2004 Fibreboards - Specifications - Requirements for hardboards《纤维板 规范 硬质纤维板的要求》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 622-2:2004Fibreboards Specifications Part 2: Requirements for hardboardsThe European Standard EN 622-2:2004 has the status of a British StandardICS 79.060.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g

2、54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 622-2:2004This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 Novem

3、ber 2006 BSI 2006ISBN 0 580 49497 7National forewordThis British Standard was published by BSI. It is the UK implementation of EN 622-2:2004 including CEN Corrigendum December 2005. It supersedes BS EN 622-2:1997 which is withdrawn.The UK participation in its preparation was entrusted to Technical C

4、ommittee B/541, Wood based panels.A list of organizations represented on B/541 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard can

5、not confer immunity from legal obligations. Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 622-2April 2004ICS 79.060.20Supersedes EN 622-2:1997Englis

6、h versionFibreboards - Specifications - Part 2: Requirements forhardboardsPanneaux de fibres - Exigences - Partie 2: Exigences pourpanneaux dursFaserplatten - Anforderungen - Teil 2: Anforderungen anharte PlattenThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to c

7、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Se

8、cretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the offi

9、cialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden,

10、Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No.

11、 EN 622-2:2004: EIncorporating Corrigendum December 2005Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 622-2:2004 (E)2Contents PageForeword31 Scope 42 Normative references 43 Terms and definitions54 Requirements.64.1 General64.2 Requirements for general

12、 purpose boards.64.3 Requirements for load-bearing boards .85 Verification of compliance 95.1 General95.2 External control95.3 Factory production control.96 Marking .106.1 General purpose boards .106.2 Load-bearing boards .106.3 Colour coding.10Annex A (normative) Supplementary properties .11Annex B

13、 (normative) Boil test according to EN 1087-1:1995 Modified procedure 12Annex C (normative) Determination of bending strength after boil test according to EN 1087-1:1995 Modified procedure.13Bibliography 14Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN

14、622-2:2004 (E)3ForewordThis document (EN 622-2:2004) has been prepared by Technical Committee CEN/TC 112 “Wood-basedpanels”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, a

15、t the latest by October 2004, and conflicting national standards shall be withdrawnat the latest by October 2004.Annexes A, B and C are normative.This standard is one of a series specifying requirements for fibreboards. The other parts of this series arelisted in clause 2 and in the bibliography.Thi

16、s document supersedes EN 622-2:1997.The following modifications have been made:a) The quality requirements of the panel types HB, HB.HLA1 and HB.HLA2 have been modified.b) The test interval for moisture resistance has been reduced in accordance with EN 13986.According to the CEN/CENELEC Internal Reg

17、ulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands,

18、 Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland andUnited Kingdom.Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 622-2:2004 (E)41 ScopeThis European Standard specifies the requirements for hardboards as defined in EN 316.The va

19、lues listed in this standard relate to product properties but they are not characteristic values to be used indesign calculations1).2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the

20、appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publ

21、ication referred to applies (including amendments).EN 310:1993, Wood-based panels Determination of modulus of elasticity in bending and of bendingstrength.EN 317, Particleboards and Fibreboards Determination of swelling in thickness after immersion in water.EN 318, Wood-based panels Determination of

22、 dimensional changes associated with changes in relative hu-midity.EN 319, Particleboards and Fibreboards Determination of tensile strength perpendicular to the plane of theboard.EN 326-1, Wood-based panels Sampling, cutting and inspection Part 1: Sampling and cutting of testpieces and expression of

23、 test results.EN 326-2, Wood-based panels Sampling, cutting and inspection Part 2: Quality control in the factory.EN 326-3, Wood-based panels Sampling, cutting and inspection Part 3: Inspection of an isolated lot ofpanels.EN 382-2, Fibreboards Determination of surface absorption Part 2: Test method

24、for hardboards.EN 622-1, Fibreboards Specifications Part 1: General requirements.EN 1087-1:1995, Particleboards Determination of moisture resistance Part 1: Boil test.EN 12871, Wood-based panels Performance specifications and requirements for load-bearing boards foruse in floors, walls and roofs.EN

25、13986:2002, Wood-based panels for use in construction Characteristics, evaluation of conformity andmarking.ENV 1995-1-1:1993, Eurocode 5 Design of timber structures Part 1-1: General rules and rules forbuildings.ISO 3340, Fibre building boards Determination of sand content.1) Such characteristic val

26、ues (e.g. for use in design calculation in ENV 1995-1-1) are either given EN 12369-1 or de-rived by testing according to EN 789, EN 1058 and ENV 1156.Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 622-2:2004 (E)53 Terms and definitionsFor the purposes o

27、f this European Standard, the following terms and definitions apply.3.1dry conditionsconditions corresponding to service class 1 of ENV 1995-1-1:1993 which is characterised by a moisture con-tent in the material corresponding to a temperature of 20 C and a relative humidity of the surrounding aironl

28、y exceeding 65 % for a few weeks per yearEN 13986:20023.2humid conditionsconditions corresponding to service class 2 of ENV 1995-1-1:1993 which is characterised by a moisture con-tent in the material corresponding to a temperature of 20 C and a relative humidity of the surrounding aironly exceeding

29、85 % for a few weeks per yearEN 13986:20023.3external conditionsconditions corresponding to service class 3 of ENV 1995-1-1:1993 which is characterised by climatic condi-tions leading to higher moisture contents than in service class 2EN 13986:20023.4general purpose useall non-load bearing applicati

30、ons, e.g. furniture and fitments3.5load-bearing useuse in a load-bearing construction, i.e. an organized assembly of connected parts designed to provide me-chanical resistance and stability to the works. Also referred to as “structure”3.6load duration categorysee Table 1Table 1 Load duration categor

31、iesLoad duration categoryOrder of accumulated duration ofcharacteristic loadExamples of loadingPermanent more than 10 years self weightLong-term 6 months to 10 years storageMedium-term 1 week to 6 months imposed loadShort-term less than one week snowa, windInstantaneous accidental loadingaIn areas w

32、hich have a heavy snow load for a prolonged period of time, part of the load should be regarded as medium-term.Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 622-2:2004 (E)64 Requirements4.1 GeneralHardboards shall comply with the general requirements o

33、f EN 622-1 together with the relevant requirements setout in 4.2 and 4.3 of this standard. The requirements for some supplementary properties are given in annex A.The requirements in Tables 2 to 7 shall be met by 5 percentile values (95 percentile values in the case of swel-ling in thickness), based

34、 on the mean test values for individual panels and calculated in accordance withEN 326-1. In the case of swelling in thickness, they shall be equal to or less than the values in the Tables, andin the case of all other properties, they shall be equal to or greater than the values in the Tables. The v

35、alues inthe Tables for both bending strength and modulus of elasticity shall apply to test results obtained in any direc-tion in the plane of the panel.With the exception of swelling in thickness, internal bond after boil test (see Tables 3, 4, 6, 7) and bendingstrength after boil test (see Table 7)

36、, the values given in the tables are characterised by a moisture content inthe material corresponding to a temperature of 20 C and a relative humidity of 65 %. The values given forswelling in thickness, internal bond after boil test and bending strength after boil test are characterised by amoisture

37、 content in the material corresponding to a temperature of 20 C and a relative humidity of 65 % beforethe treatment (immersion in water or boil treatment).The moisture resistance of hardboards for use in humid and exterior conditions (see Tables 3, 4, 6 and 7) isassessed either as internal bond afte

38、r boil test (according to EN 1087-1), with the modified procedure given inannex B, or as bending strength after boil test (according to EN 1087-1), with the modified procedure given inannex C. These two testing procedures are regarded as equivalent alternatives. Where requirements for bothprocedures

39、 are given, compliance with only one set of specifications is required (see Table 7).4.2 Requirements for general purpose boards4.2.1 Requirements for boards for use in dry conditionsTable 2 specifies the requirements for general purpose boards for use in dry conditions, e.g. interior fitmentsinclud

40、ing furniture.Table 2 Requirements for general purpose boards for use in dry conditions (type HB)Ranges of nominal thickness (mm)PropertyTestmethodUnit 3,5 3,5 to 5,5 5,5Swelling in thickness24 hEN 317 % 37 30 25Internal bond EN 319 N/mm20,50 0,50 0,50Bending strength EN 310 N/mm230 30 25Licensed Co

41、py: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 622-2:2004 (E)74.2.2 Requirements for boards for use in humid conditionsTable 3 specifies the requirements for general purpose boards for use in humid conditions.Table 3 Requirements for general purpose boards for use

42、 in humid conditions (type HB.H)Ranges of nominal thickness (mm)PropertyTestmethodUnit 3,5 3,5 to 5,5 5,5Swelling in thickness24 hEN 317 % 25 20 20Internal bond EN 319 N/mm20,60 0,60 0,60Bending strength EN 310 N/mm235 32 30Internal bond afterboil testaEN 319EN 1087-1N/mm20,30 0,30 0,25aFor the dete

43、rmination of internal bond after boil test, the modified procedure given in annex B applies.4.2.3 Requirements for boards for use in exterior conditionsTable 4 specifies the requirements for general purpose boards for use in exterior conditions.Table 4 Requirements for general purpose boards for use

44、 in exterior conditions (type HB.E)Ranges of nominal thickness (mm)PropertyTestmethodUnit 3,5 3,5 to 5,5 5,5Swelling in thickness24 hEN 317 % 12 10 8Internal bond EN 319 N/mm20,70 0,60 0,50Bending strength EN 310 N/mm240 35 32Modulus of elasticityin bendingEN 310 N/mm23 600 3 100 2 900Internal bond

45、afterboil testaEN 310EN 1087-1N/mm20,50 0,42 0,35aFor the determination of internal bond after boil test, the modified procedure given in annex B applies.Licensed Copy: Wang Bin, na, Fri Feb 02 06:29:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 622-2:2004 (E)84.3 Requirements for load-bearing boa

46、rds4.3.1 Requirements for boards for use in dry conditionsTable 5 specifies the requirements for load-bearing boards for use in dry conditions for all load durationcategories.Table 5 Requirements for load-bearing boards for use in dry conditions (type HB.LA)Ranges of nominal thickness (mm)PropertyTe

47、stmethodUnit 3,5 3,5 to 5,5 5,5Swelling in thickness24 hEN 317 % 35 30 25Internal bond EN 319 N/mm20,60 0,60 0,60Bending strength EN 310 N/mm233 32 30Modulus of elasticityin bendingEN 310 N/mm22 700 2 500 2 300If it is made known by the purchaser that the boards are intended for specific use in floo

48、ring, walls or roof-ing, the performance standard EN 12871 also has to be consulted. This may result in additional require-ments having to be complied with.4.3.2 Requirements for boards for use in humid conditionsTable 6 specifies the requirements for load-bearing boards for use in humid conditions

49、for all load durationcategories.Table 6 Requirements for load-bearing boards for use in humid conditions (type HB.HLA1)Ranges of nominal thickness (mm)PropertyTestmethodUnit 3,5 3,5 to 5,5 5,5Swelling in thickness24 hEN 317 % 17 15 12Internal bond EN 319 N/mm20,80 0,70 0,65Bending strength EN 310 N/mm238 36 34Modulus of elasticityin bendingEN 310 N/mm23 800 3 600 3 100Internal bond afterboil testaEN 319EN 1087-1N/mm20,50 0,42 0,35If it is made known by the purchaser that the boards are intended for s