BS EN 599-2-2016 Durability of wood and wood-based products Efficacy of preventive wood preservatives as determined by biological tests Labelling《木材和木制品的耐久性 用生物试验确定预防性木材防腐剂的功效 标记》.pdf

《BS EN 599-2-2016 Durability of wood and wood-based products Efficacy of preventive wood preservatives as determined by biological tests Labelling《木材和木制品的耐久性 用生物试验确定预防性木材防腐剂的功效 标记》.pdf》由会员分享，可在线阅读，更多相关《BS EN 599-2-2016 Durability of wood and wood-based products Efficacy of preventive wood preservatives as determined by biological tests Labelling《木材和木制品的耐久性 用生物试验确定预防性木材防腐剂的功效 标记》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 599-2:2016Durability of wood and wood-based products Efficacy ofpreventive wood preservativesas determined by biologicaltestsPart 2: LabellingBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 599-2:2016 BRITISH STANDARDNational forewordThis British Standard

2、 is the UK implementation of EN 599-2:2016. Itsupersedes BS EN 599-2:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/515, Wood preservation.A list of organizations represented on this committee can beobtained on request to its secretary.This publ

3、ication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 88433 7ICS 71.100.50Compliance with a British Standard cannot confer immunity

4、 fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2016.Amendments/Corrigenda issued since publicationDate Text affectedBS EN 599-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 599-2 October 2016 ICS

5、71.100.50 Supersedes EN 599-2:1995English Version Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2: Labelling Durabilit du bois et des matriaux drivs du bois - Efficacit des produits prventifs de prservation du bois tab

6、lie par des essais biologiques - Partie 2 : tiquetage Dauerhaftigkeit von Holz und Holzprodukten - Anforderungen an Holzschutzmittel wie sie durch biologische Prfungen ermittelt werden - Teil 2: Kennzeichnung This European Standard was approved by CEN on 15 July 2016. CEN members are bound to comply

7、 with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC M

8、anagement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

9、 status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

10、Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016

11、CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 599-2:2016 EBS EN 599-2:2016EN 599-2:2016 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Labelling . 5 5 Lab

12、elling requirements 6 5.1 General 6 5.2 Product name . 6 5.3 Use class appropriate for the product . 6 5.4 Application process 6 5.4.1 General 6 5.4.2 Superficial application 6 5.4.3 Penetrating application 6 5.5 Type of wood . 6 5.6 Target organisms 6 5.7 Application rate . 7 Annex A (informative)

13、Example of how to report efficacy information on a label . 8 Bibliography 9 BS EN 599-2:2016EN 599-2:2016 (E) 3 European foreword This document (EN 599-2:2016) has been prepared by Technical Committee CEN/TC 38 “Durability of wood and wood-based products”, the secretariat of which is held by AFNOR.

14、This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of th

15、e elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 599-2:1995. Significant technical differences between this edition and EN 599-2:1995 are as follows: Clause 4, Classification,

16、 Clause 5, Information to be supplied by the manufacturer and Clause 6, Marking, have been merged into one Clause 4, Labelling, which outlines the information to be presented on the product label, relative to its efficacy; an example of how to report efficacy information on a label is given in Annex

17、 A; the system of codes for use in classifying and labelling the efficacy of wood preservative products has been abandoned; the Normative references and Bibliography have been updated. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries

18、are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

19、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 599-2:2016EN 599-2:2016 (E) 4 Introduction This part of EN 599 is one of a series and should be used in conjunction with EN 599-1, with EN 335, which describes the use classes of treated wood, and

20、 with EN 351-1, which describes a classification system for preservative treated wood in terms of preservative penetration and gives guidance on retention requirements. The need for wood preservatives depends in part on the natural durability of the wood and therefore this part of EN 599 should be u

21、sed also in conjunction with EN 350 and EN 460. This document only takes into account those aspects of the product labelling relating to wood preservative efficacy. Additional items which are not mentioned in this standard should be listed on the label where required by law. BS EN 599-2:2016EN 599-2

22、:2016 (E) 5 1 Scope This European Standard specifies the requirements for labelling wood preservative products according to their efficacy and suitability for use, for each of the five use classes defined in EN 335. This European Standard is applicable to all wood preservative products supplied for

23、application in liquid form for the preventive treatment of timbers (structural and non-structural) against wood-attacking fungi, wood-attacking insects and marine organisms as described in EN 1001-2 and EN 335. It is applicable to products for preventive treatments against fungi causing disfiguremen

24、t (blue stain) of wood in service, only if this forms part of the overall preventive effectiveness of the product. This European Standard is not applicable to wood preservative products supplied for application as pastes, solids or in capsule form because they cannot be tested without modification o

25、f the biological tests demanded in this standard. It does not apply either to wood preservative products for remedial (curative) treatments or to those applied to prevent fungi causing sap stain on green (unseasoned) timber. 2 Normative references The following documents, in whole or in part, are no

26、rmatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 335, Durability of wood and wood-based products - Use cl

27、asses: definitions, application to solid wood and wood-based products EN 351-1, Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention EN 599-1:2009+A1:2013, Durability of wood and wood-based products - Efficacy

28、 of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class EN 1001-2:2005, Durability of wood and wood based products - Terminology - Part 2: Vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given

29、in EN 1001-2:2005 and EN 599-1:2009+A1:2013 apply. 4 Labelling Wood preservative products shall be labelled according to their efficacy where tested in accordance with EN 599-1. The label shall include the following information: the name of the product; the use class(es) for which the wood preservat

30、ive product is intended; the suitable application process(es); the type(s) of wood for which the product is suitable; the target organisms; BS EN 599-2:2016EN 599-2:2016 (E) 6 the application rates/retentions. NOTE 1 An example of how this information may be presented on a label is given in Annex A.

31、 NOTE 2 Additional information may be required by European or national regulations. 5 Labelling requirements 5.1 General The container of the product shall be labelled with or accompanied by the information specified in 5.2 to 5.7. 5.2 Product name This is the trade name of the product. 5.3 Use clas

32、s appropriate for the product The label shall indicate the use class, according to EN 335, appropriate for the intended end use, when complying with efficacy testing in accordance with EN 599-1. Products appropriate for use in more than one use class shall be labelled with the number of each use cla

33、ss to which they conform. NOTE Additional information on the specific end uses can be given (e.g. poles, decking, windows). In use class 3, where the product is to be used protected from direct wetting under a paint or other coating, which is applied before the treated wood is put into use, this sha

34、ll be stated. 5.4 Application process 5.4.1 General The wood preservative product shall be defined as being suitable for either superficial application processes, or penetrating treatment processes, or both types of process, providing that the specifications given in EN 599-1 are complied with. NOTE

35、 Wood preservative products are formulated to suit a range of specific methods of application from simple superficial processes to more technically complex, industrialized processes. The effectiveness of a product can depend critically on the way it is applied (see EN 5991:2009+A1:2013, Annex C). On

36、e or more of the following application methods for which the product is designed shall be listed. 5.4.2 Superficial application These include: brush, spray, dipping, other (to be specified). 5.4.3 Penetrating application These include: vacuum/pressure, double vacuum, other (to be specified). 5.5 Typ

37、e of wood The wood preservative product shall be labelled to indicate its suitability for softwoods, for hardwoods or for both. 5.6 Target organisms The wood preservative product shall be labelled to indicate the organisms against which it has been effectively tested in accordance with EN 599-1. BS

38、EN 599-2:2016EN 599-2:2016 (E) 7 These could be one or more of the following: fungi (brown and white rot fungi), soft rot fungi, blue stain in service, Hylotrupes bajulus, Lyctus brunneus, Anobium punctatum, termites and marine organisms. Efficacy against all beetles may be claimed if efficacy has b

39、een shown against the most resistant of those listed above. 5.7 Application rate The required application rate shall be calculated in accordance with EN 351-1 from the critical value, which is derived from EN 599-1 for the relevant use class and application process. For superficially applied preserv

40、atives, this shall be expressed in grams per square metre. For penetrating preservatives, this shall be expressed as the retention in kilograms per cubic metre in the analytical zone in accordance with EN 351-1. NOTE 1 An adjustment factor is applied to take account of local variations in building p

41、ractices and climate as well as of the variety of exposure conditions and service life requirements within a use class, as specified in EN 3511. This may lead to application rates being expressed as a range for a given use class. NOTE 2 Certain physical and chemical properties of the wood preservati

42、ve product can affect its efficacy. The user is advised to seek further information, which may be relevant for a specific use, in the Technical Data Sheet provided by the manufacturer. BS EN 599-2:2016EN 599-2:2016 (E) 8 Annex A (informative) Example of how to report efficacy information on a label

43、Name of the product xxxx Use class UC2; UC3 Application process Superficial (brush, dipping) Type of wood Hardwood, softwood Target organism Fungi, beetles Application rate UC2 120 g/m2 UC3 200 g/m2 BS EN 599-2:2016EN 599-2:2016 (E) 9 Bibliography 1 EN 350, Durability of wood and wood-based products

44、 - Natural durability of solid wood 2 EN 460, Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes This page deliberately left blankThis page deliberately left blankBSI is the national body responsi

45、ble for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together busine

46、ss, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of

47、all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Know

48、ledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Developmen

49、t Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the