BS EN 3660-037-2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Bushing strip elastomer for cable outlet style Z Pr.pdf

《BS EN 3660-037-2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Bushing strip elastomer for cable outlet style Z Pr.pdf》由会员分享，可在线阅读，更多相关《BS EN 3660-037-2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Bushing strip elastomer for cable outlet style Z Pr.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 3660-037:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outlet accessories for circular and rectangular electrical and optical connectorsPart 037: Bushing strip, elastomer, for cable outlet, style Z Product standardThi

2、s British Standardwas published underthe authority of theStandards Policy andStrategy Committee on 30November 2009 BSI 2009ISBN 978 0 580 61334 0Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-037:2009National forewordThis British Standard is the UK implementation of EN 3660-03

3、7:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the neces

4、sary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3660-037:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-037 October 2009 ICS 49.060 English Version Aerospace series -

5、Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 037: bushing strip, elastomer, for cable outlet, style Z Product standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 037: Bande de

6、traverse en lastomre pour accessoires arrire, type Z - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische Rund und Rechteck steckverbinder - Teil 037: Aufftterungsstreifen, Elastomer, Bauform Z - ProduktnormThis European Standard was approved by CEN on 27 June 2009. CEN mem

7、bers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicat

8、ion to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has

9、the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

10、ugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means

11、 reserved worldwide for CEN national Members. Ref. No. EN 3660-037:2009: EBS EN 3660-037:2009EN 3660-037:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Characteristics .55 Designation 6BS EN 3660-037:2009EN 3660-037:2009 (E) 3 Foreword This document (

12、EN 3660-037:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Officia

13、l Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at th

14、e latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the nationa

15、l standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol

16、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3660-037:2009EN 3660-037:2009 (E) 4 1 Scope This product standard defines a bushing strip, style Z, for use under the following conditions: Associated cable outlet (s) : EN 3660-002 Temperature range

17、 : 65 C to 200 C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3660-0

18、01, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards EN

19、 3660-020, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief Product standard EN 3660-021, Aerospace series Cable outlet accessories for circular and rect

20、angular electrical and optical connectors Part 021: Cable outlet, style A, 90, unsealed, self-locking with clamp strain relief for EN 3645 Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. BS EN 3660-037:2009EN 3660-037:

21、2009 (E) 5 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1. Dimensions are in millimetres Key 1 Part number identified on centre in raised figures on this side Figure 1 Table 1 Dash No. A Mass Used on shell size of EN 3660-020 and EN 3660-021 0,8 max. mm g

22、 01 7,92 8,0 09-17 02 11,18 11,0 19-25 4.2 Material Material: Elastomer 4.3 Tests Test and qualification are performed on appropriate cable outlet. BS EN 3660-037:2009EN 3660-037:2009 (E) 6 5 Designation EXAMPLE 1 Description block BUSHING STRIP Identity block EN3660-037XX Number of this standard Da

23、sh No., see Table 1 EXAMPLE 2 EN3660-03701 Bushing strip, elastomer, Dash No. 01. NOTE 1 No gaps are required between sections in the part number when printed. NOTE 2 If necessary, the code I9005 may be placed between the description block and the identity block. BS EN 3660-037:2009This page has bee

24、n intentionally left blankBS EN3660-037:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in

25、 Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our produc

26、ts and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI off

27、ers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44

28、 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Inform

29、ation on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Infor

30、mation Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0

31、)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright,

32、in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without

33、 prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: