BS EN 1101-1996 Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small f.pdf

《BS EN 1101-1996 Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small f.pdf》由会员分享，可在线阅读，更多相关《BS EN 1101-1996 Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small f.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 1101:1996Incorporating Amendment No. 1Textiles and textile Burning behaviour Curtains and drapes Detailed procedure to determine the ignitability of vertically oriented specimens (small flame)The European Standard EN 1101:1995, with the incorporation of amendment A1:2005, has t

2、he status of a British StandardICS 59.080.30products BS EN 1101:1996Committees responsible for this British StandardThCommittee TCI/63, BurnreAssociaBrBritish Carpet MBrBrThis British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published un

3、der the authority of the Standards Board and comes into effect on 15 April 1996 BSI 2006ISBN 0 580 25555 7anufacturers Association Ltd.itish Clothing Industry Associationitish Interior Textiles AssociationBritish Measurement and Testing AssociationBritish Polyolefin Textiles AssociationBritish Texti

4、le Machinery AssociationBritish Textile Technology GroupChemical Industries AssociationChief and Assistant Chief Fire Officers AssociationChild Accident Prevention TrustConfederation of British Wool Textiles LimitedConsumer Policy Committee of BSIConsumers AssociationDepartment of HealthDepartment o

5、f Trade and Industry (Consumer Safety Unit. C A Division)Institute of Trading Standards AdministrationInternational Wool SecretariatMade-Up Textiles AssociationMail Order Traders AssociationMinistry of DefenceNational Childrens Wear AssociationNational Fillings Trades AssociationNational Wool Textil

6、e Export CorporationSoap and Detergent Industry AssociationSociety of Dyers and ColouristsTextiles Finishers AssociationTextile InstituteWarrington Fire Research CentreAmendments issued since publicationAmd. No. Date Comments16142 31 May 2006 Revision of test procedure, clause 7e preparation of this

7、 British Standard was entrusted to Technical ing behaviour, upon which the following bodies were presented:tion of Consulting Scientistsitish Apparel and Textile ConfederationBS EN 1101:1996 BSI 2006ContentsPageCommittees responsible Inside front coverNational foreword iiForeword 2Text of EN 1101 3L

8、ist of references Inside back coveriBS EN 1101:1996iiTextiles and textile products Burning behaviour Curtains and drapes Detailed procedure to determine the ignitability of vertically oriented specimens (small flame), published by the European Committee for Standardization (CEN). A British Standard

9、does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Cross-referencesPublication referred to Corresponding British

10、StandardEN 26330:1993 BS EN 26330:1994 Textiles Domestic washing and drying procedures for textile testingEN ISO 6940:1995 BS EN ISO 6940:1995 Textile fabrics Burning behaviour Determination of ease of ignition of vertically oriented specimensISO 3175:1995 BS EN ISO 3175:1996 Textiles Evaluation of

11、stability to machine dry-cleaningSummary of pagesThis document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cover.This standard has been updated (see copyright date) and may have had amendments incorporated. This wil

12、l be indicated in the amendment table on the National forewordThis British Standard has been prepared by Technical Committee TCI/63 and is the English language version of EN 1101:1995, including amendment A1:2005 BSI 2006inside front cover.EUROPISCHE NORMICS 59.080.30Descriptors: TeEnglish versionTe

13、xtiles and textile products Burning behaviour Curtains and drapes Detailed procedure to determine the ignitability of vertically orTextiles et produits teau feu Rideaux et tentures Procdure dtaille pour dtermdprouvett(petite flamme)(inclut lamendzur vertikal )European Committee for Standfr NormungSt

14、assart 3n in any form anComit Europen de NormalEuropisches Komitee Central Secretariat: rue de 1995 All rights of reproduction and communicatiocountries to CEN and its members.d by any means reserved in all Ref. No. EN 1101:1995 + A1:2005 Eardizationisation6, B-1050 BrusselsGerman). A version in any

15、 other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland

16、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.CENthe CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

17、Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, Frenc

18、h, iented specimens (small flame)(includes amendment A1:2005)xtiles Comportement iner lallumabilit es disposes verticalement ement A1:2005)Textilien Brennverhalten von Vorhngen und Gardinen Detailliertes Verfahren Bestimmung der Entzndbarkeit vonangeordneten Proben (kleine Flamme(enthlt nderung A1:2

19、005)This European Standard was approved by CEN on 1995-10-25. Amendment A1 was approved by CEN on 2005-05-12. CEN members are bound to comply with EN 1101November 1995+ A1June 2005xtiles, woven fabrics, upholstery, curtains, fire tests, flammability, test specimensEUROPEAN STANDARDNORME EUROPENNEEN

20、1101:1995ForewordThis European Standard has been prepared by the Technical Committee CEN/TC 248, Textiles and textile products, of which the secretariat is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen

21、t, at the latest by May 1996, and conflicting national standards shall be withdrawn at the latest by May 1996.According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland

22、, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.The ignitability is determined using a modified EN ISO 6940. These modifications are listed in this document.Foreword to amendment A1This document (EN 1101:1995/A1:2005) has been prepared b

23、y Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI.This Amendment to the European Standard EN 1101:1995 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 200

24、5, and conflicting national standards shall be withdrawn at the latest by December 2005.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,

25、 Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.ContentsPageForeword 21Scope 32 Normative references 33Sampling 34Cleansing 35

26、Test specimens 36 Conditioning 37 Test procedure 38 Test report 3 BSI 20062EN 1101:1995 1 ScopeThis European Standard specifies a procedure to determine the ignitability of textiles for curtains and drapes by testing in accordance with EN ISO 6940.2 Normative referencesThis European Standard incorpo

27、rates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Europe

28、an Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies.EN 26330, Textiles Domestic washing and drying procedures for textile testing (ISO 6330:1984).EN ISO 6940:1995, Textile fabrics Burning behaviour Determ

29、ination of ease of ignition of vertically oriented specimens (ISO 6940:1984).ISO 3175 Textiles Determination of dimensional change on dry cleaning in perchloroethylene Machine method.3 SamplingTest samples shall be representative of the materials and drapes in accordance with the number and size of

30、the test specimen in EN ISO 6940.4 CleansingThe sample shall be submitted to the cleansing procedure given on the care label. If no cleansing procedure is prescribed, the material shall be submitted to one cycle of one of the following standard cleansing procedures as appropriate to the fabric: wash

31、 procedure, in accordance with method 6A (40 3) C of EN 26330 and dried in accordance with method C of EN 26330; dry cleaning procedure in accordance with ISO 3175.If the fabric is not intended to be cleansed, the test method shall be carried out on sample and specimens as received.NOTE This cleansi

32、ng is not intended as a durability test for flame retardant treatment but only to remove non durable finishes or contamination and to obtain fabric surfaces and structure characteristics which are representative of those typically obtained in fabrics during actual use.5 Test specimensThe test specim

33、ens shall be cut from the sample as described in clause 3.The specimens shall consist of one or more layers of materials, according to the construction of the curtain.Unless otherwise specified, the specimen shall not contain features of construction such as seams, pleats, etc. Nevertheless the test

34、 specimens shall contain pattern or design features when they are a specific part of the fabric such as Jacquard construction.6 ConditioningCondition the test specimen for at least 24 h in the standard atmosphere of (20 2) C and (65 5) % relative humidity.7 Test procedureThe ignitability shall be me

35、asured according to EN ISO 6940 using commercial gas. To determine the initial flame application time, the preliminary test shall be carried out starting the first application time at 1 s and increasing it from 1 s in 1 s intervals up to 5 s, applied again for the 10 s mark, 15 s mark and 20 s mark.

36、Propane gas is recommended but butane gas may be used. If butane gas is used it shall be stated in the test report.8 Test reportThe test report shall include the following information:a) reference to this European Standard;b) identification of the fabrics tested;c) the cleansing procedure if used or

37、 a statement that the material is not intended to be cleansed;d) date of test;e) ambient conditions of temperature and relative humidity in the area in which the test is carried out;f) size of specimen used;g) whether or not the fabrics ignite in 20 s;h) a tabulation, for each direction in the case

38、of edge ignition or each surface and direction in case of surface ignition, of the number of cases of ignition and non ignition observed at each timer setting used during the test;i) mean ignition time for each direction or, in the case of surface ignition, for each direction and surface of the fabr

39、ic tested;j) minimum ignition time of the textile material BSI 2006 3which is the lowest of mean ignition time reported in paragraph above;k) any deviation from this procedure.4blankBS EN 1101:1996 List of referencesSee national foreword. BSI 2006BS ENBSI389 Chiswick High RoadLondonW4 4AL1101:1996BS

40、I British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users o

41、f British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary o

42、f the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.

43、Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for internat

44、ional standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technic

45、al Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with st

46、andards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via

47、 British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as pe

48、rmitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the cours

49、e of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.