BS A 400-2010 Specification for nuts plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel《抗腐蚀钢制飞机上安全螺栓用平纹有沟槽(统一标准六角形和统.pdf

《BS A 400-2010 Specification for nuts plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel《抗腐蚀钢制飞机上安全螺栓用平纹有沟槽(统一标准六角形和统.pdf》由会员分享，可在线阅读，更多相关《BS A 400-2010 Specification for nuts plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel《抗腐蚀钢制飞机上安全螺栓用平纹有沟槽(统一标准六角形和统.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationAEROSPACE SERIESSpecification for nuts, plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosionresisting steelnullS A nullnullnullnulln

2、ullnullnullnullBS A 400:2010 BRITISH STANDARDPublishing and copnullright infornullationThe BSI copyright notice displayed in this document indicates nullhen the document nullas last issuednullnull BSI 2010ISBN nullnullnull 0 nullnull0 nullnullnullnull1 4InullS 4nullnull0null0nullnull0The nullollonul

3、ling BSI renullerences relate to the nullornull on this standard: nullommittee renullerence Anullnullnull12 Dranullt nullor comment 10nullnull0212nullnullnull DnullPublication histornullnullirst punulllished Septemnuller 2010Anullendnullents issued since publicationnullate nullext affected null BSI

4、2010 null iBS A 400:2010BRITISH STANDARDContentsnullorenullord iinull Scope 1null Normatinulle renullerences 1null nulleneral renulluirements 1null nullaterial and manunullacture 1null Dimensions 1null Screnull threads 1null Antinullcorrosion treatment 2null Inspection procedure 2null Designation 2A

5、nnexesAnnenull A nullinnullormatinullenull Inch to millimetre connullersion 5Binullliography 6nullist of tablesTanullle 1 null Dimensions onull slotted nuts 3Tanullle 2 null Dimensions onull plain nuts 4Tanullle Anull1 null nullonnullersion onull inches to appronullimate millimetre enulluinullalents

6、 nullrounded to one decimal placenull 5Sunullnullarnull of pagesThis document comprises a nullront conullernull an inside nullront conullernull pages i to iinull pages 1 to nullnull an inside nullacnull conuller and a nullacnull conullernullBS A 400:2010ii null null BSI 2010BRITISH STANDARDnullorenu

7、llordPublishing infornullationThis British Standard is punulllished nully BSI and came into enullnullect on null0 Septemnuller 2010null It nullas prepared nully Technical nullommittee Anullnullnull12nullAerospace fasteners and fastening systemsnull A list onull organinullations represented on this c

8、ommittee can nulle onulltained on renulluest to its secretarynullPresentational connullentionsThe pronullisions onull this standard are presented in roman nullinullenull uprightnulltypenull Its renulluirements are enullpressed in sentences in nullhich the principal aunulliliary nullernull is nullsha

9、llnullnullCommentary, explanation and general informative material is presented in smaller italic type, and does not constitute a normative element.Contractual and legal considerationsThis punulllication does not purport to include all the necessary pronullisions onull a contractnull nullsers are re

10、sponsinullle nullor its correct applicationnullConullpliance nullith a nullritish Standard cannot confer inullnullunitnull fronulllegal obligationsnullnull BSI 2010 null 1BS A 400:2010BRITISH STANDARDnull ScopeThis British Standard specinulles the materialsnull dimensionsnull nullnish and inspection

11、 renulluirements nullor corrosionnullresisting steel nuts nullith uninulled henullagons and uninulled threads nullor use nullith shear nullolts nullor aircranulltnull It manulles pronullision nullor ranges onull plain and slotted nutsnullnull nullornullatinulle referencesThe nullollonulling renuller

12、enced documents are indispensanullle nullor the application onull this documentnull nullor dated renullerencesnull only the edition cited appliesnull nullor undated renullerencesnull the latest edition onull the renullerenced document nullincluding any amendmentsnull appliesnullBS S null0null High c

13、hromiumnullnicnullel corrosion resisting steel forging stocnull, nullars, forgings and parts nullnullnullnull to 1 nullnullnull nullnullanull limiting ruling section 1nullnull mmnullBS A 100null nullpecinullcation for general renulluirements for nullolts and free running nuts of tensile strength not

14、 exceeding 1 24null nullnullaBS nullN 2null1nullnull nullassivation of corrosion resisting steels and decontamination of nicnullel nullase alloysnull nulleneral renulluirenullentsThe nuts shall not nulle used as direct replacements nullor those connullorming to BS A 110 nullithout the authority onul

15、l the original enulluipment manunullacturernulls Design Authoritynullnullnullnullnull nullhis standard has nulleen created to provide a cadmium free alternative to plain and slotted nuts conforming to nullnull A 11null.The nuts shall connullorm to BS A 100 in respect onull manunullacturenull screnul

16、lthreadsnull identinullcation and marnullingnullnull nullaterial and nullanufactureThe nuts shall nulle machined all onuller nullrom corrosionnullresisting steel connullorming to BS S null0 nullcondition: hardened and temperednullnullnull nullinullensionsAll nullnished nuts shall connullorm to the d

17、imensions and tolerances ginullen in Tanullle 1 or Tanullle 2 as appropriatenullnullnullnullnull nullhe values in inch units are to nulle regarded as the standard. A tanullle is given in Annex A to provide a ready means of calculating the approximate millimetre enulluivalents of the inch dimensions.

18、 nullore accurate conversions should nulle nullased on the tanullles in nullnull 35null.null Screnull threadsThe nuts shall hanulle uninulled threads onull the nullorm and class onull nullt specinulled in BS A 100nullBS A 400:20102 null null BSI 2010BRITISH STANDARDnull Anticorrosion treatnullentAll

19、 nullnished nuts shall nulle passinullated in accordance nullith BS nullN 2null1nullnullmaterial type: nullerritic and martensitic chromium steelsnullnullnull Inspection procedureThe nuts shall nulle inspected in accordance nullith BS A 100nullnull nullesignationThe nuts shall nulle designated A400n

20、ullnullnull 1nullnull nullhere nullnull is the part renullerence sunullnullnull specinulled in Tanullle 1 or Tanullle 2 as appropriatenullnullnullnullnull nullor examplenull A4nullnullnullnullnull, A4nullnullnullnullnull.1nullnullarnulling A400 on or in relation to a product represents a manunullact

21、urernulls declaration onull connullormitynull inullenull a claim nully or on nullehalnull onull the manunullacturer that the product meets the renulluirements onull the standardnull The accuracy onullthe claim is solely the claimantnulls responsinullilitynull Such a declaration is not to nulle connu

22、llused nullith thirdnullparty certinullcation onull connullormitynullnull BSI 2010 null nullBS A 400:2010BRITISH STANDARDTanullle 1 nullinullensions of slotted nuts Dimensions in inchesSlotted nut null nullhird angle pronullectionnullenull1 nullountersinnull null0nullnull120null on this nullace only

23、 to manullor diameter onull threadnull2 TannullR rounded slotsnullnull nullhamnuller 2nullnullnullnullnullnull on this nullace only to across nullats nullAnullnullnullnull null null null null null null null null nullnull nullnull nullnull nullnullnullonullinal sinullenullecinullal enulluinullalent o

24、f nonullinal sinullePart reference suffixnullidth across nullatsnullidth across cornersnullhicnullness Slot nullonuller face of nut to bottonull of slotB C Gnullepth Jnullidth K Lnullinnull nullaxnull nullaxnull nullinnull nullaxnull refnull nullinnull nullaxnull nullinnull nullaxnullnullnullnull2nu

25、ll nullNnull 0null2null0 nullS 0nullnullnull0 0nullnullnullnull 0null4nullnull 0null1null0 0null200 0null0null0 0null0null0 0null0null0 0null100 0null110nullnull1nullnullnull24 nullNnull 0nullnull12 null nullS 0null4null1 0null4nullnull 0nullnull0null 0null1null0 0null200 0null0null0 0null0null0 0nu

26、ll0null0 0null100 0null110nullnullnullnullnull24 nullNnull 0nullnullnullnull nullS 0null4nullnull 0nullnull00 0nullnullnullnull 0null1null0 0null200 0null0null0 0null0null0 0null0null0 0null100 0null110nullnull1nullnullnull20 nullNnull 0null4nullnull null nullS 0nullnullnull4 0nullnullnull2 0nullnul

27、lnull0 0null1null0 0null200 0null0null0 0null0null0 0null0null0 0null100 0null110nullnullnull20 nullNnull 0nullnull00 NS 0nullnullnullnull 0nullnullnullnull 0nullnullnull4 0null1null0 0null200 0null0null0 0null0null0 0null0null0 0null100 0null110nullnull1nullnullnull1null nullNnull 0nullnullnull2 nu

28、ll nullS 0nullnull41 0nullnullnull0 0nullnullnullnull 0null1null0 0null200 0null0null0 0null0null0 0null0null0 0null100 0null110nullnullnullnullnull1null nullNnull 0nullnull2null nullS 0nullnullnullnull 0nullnullnullnull 1null010 0null1null0 0null200 0null0null0 0null12null 0null1nullnull 0null100 0

29、null110nullnullnull1null nullNnull 0nullnullnull0 SS 0nullnull2null 0nullnullnullnull 1null0nullnull 0null1null0 0null200 0null0null0 0null12null 0null1nullnull 0null100 0null110BS A 400:20104 null null BSI 2010BRITISH STANDARDTanullle 2 nullinullensions of plain nutsDimensions in inchesPlain nut nu

30、ll nullhird angle pronullectionnullenull1 nullountersinnull null0nullnull120null on one nullace only to manullor diameter onull threadnull2 nullhamnuller 2nullnullnullnullnullnull on nulloth nullaces to across nullats nullAnullnullnullnull null null null null null null nullnullonullinal sinulle null

31、ecinullal enulluinullalent of nonullinal sinullePart reference suffixnullidth across nullats nullidth across cornersnullhicnullnessB C Gnullinnull nullaxnull nullaxnull nullinnull nullaxnullnullnullnull2null nullNnull 0null2null0 nullT 0nullnullnull0 0nullnullnullnull 0null4nullnull 0null1null0 0nul

32、l200nullnull1nullnullnull24 nullNnull 0nullnull12 null nullT 0null4null1 0null4nullnull 0nullnull0null 0null1null0 0null200nullnullnullnullnull24 nullNnull 0nullnullnullnull nullT 0null4nullnull 0nullnull00 0nullnullnullnull 0null1null0 0null200nullnull1nullnullnull20 nullNnull 0null4nullnull null n

33、ullT 0nullnullnull4 0nullnullnull2 0nullnullnull0 0null1null0 0null200nullnullnull20 nullNnull 0nullnull00 NT 0nullnullnullnull 0nullnullnullnull 0nullnullnull4 0null1null0 0null200nullnull1nullnullnull1null nullNnull 0nullnullnull2 null nullT 0nullnull41 0nullnullnull0 0nullnullnullnull 0null1null0

34、 0null200nullnullnullnullnull1null nullNnull 0nullnull2null nullT 0nullnullnullnull 0nullnullnullnull 1null010 0null1null0 0null200nullnullnull1null nullNnull 0nullnullnull0 ST 0nullnull2null 0nullnullnullnull 1null0nullnull 0null1null0 0null200null BSI 2010 null nullBS A 400:2010BRITISH STANDARDAnn

35、ex A (infornullatinulle) Inch to nullillinulletre connullersionTanullle Anull1 Connullersion of inches to approxinullate nullillinulletre enulluinullalents (rounded to one decinullal place)in nullnullnull nullnull4nullnull1null nullnullnullnullnullnull nullnullnullnullnull1null 11null1null 12nullnul

36、lnullnull1null 14nullnullnullnullnull 1nullnullnullnull 1nullnull1nullnullnull 22null21 2nullnull42 null0nullnullBS A 400:2010null null null BSI 2010BRITISH STANDARDnullibliographnullnullor dated renullerencesnull only the edition cited appliesnull nullor undated renullerencesnull the latest edition

37、 onull the renullerenced document nullincluding any amendmentsnull appliesnullBS A 110null nullpecinullcation for steel nuts nulluninulled hexagons and uninulled threadsnull for shear nullolts for aircraftBS nullnull0null Conversion factors for unitsThis page deliberately left blankBSI is the indepe

38、ndent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards w

39、orldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve th

40、e quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +4

41、4 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly usi

42、ng acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosuppl

43、y the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005E

44、mail: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase pr

45、iceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI w

46、ebsite at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardization bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmit

47、ted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must be obtained. Details and advice can be obtained from the Copy-right & Licensing Manager.Tel: +44 (0)20 8996 7070Email: