BS A 364-2000 Rivets solid - Test method《实心铆钉 试验方法》.pdf

《BS A 364-2000 Rivets solid - Test method《实心铆钉 试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS A 364-2000 Rivets solid - Test method《实心铆钉 试验方法》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD AEROSPACE SERIES BS A 364

2、:2000 ISO 17057:1999 ICS 49.030.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Rivets, solid Test methodThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and com

3、es into effect on 15 April 2000 BSI 04-2000 ISBN 0 580 34489 4 BS A 364:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 17057:1999 and implements it as the UK national standard. The UK participation in its preparation wa

4、s entrusted by Technical Committee ACE/21, Aerospace fasteners and fastening systems, to Subcommittee ACE/12/1, Aerospace fasteners and fastening systems (international), which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committe

5、e any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-refer

6、ences The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catal

7、ogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comp

8、rises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 4, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.Referencenumber ISO17057:1999(E) INTERNATIONAL STANDARD

9、 ISO 17057 Firstedition 1999-12-15 AerospaceRivets,solidTestmethod Aronautique et espace Rivets ordinaires Mthode de contrle et dessaiISO17057:1999(E) ii ISO17057:1999(E)iii Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).

10、TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,in liaisonwithISO,alsotakepa

11、rtinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothe

12、memberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. AttentionisdrawntothepossibilitythatsomeoftheelementsofthisInternationalStandardmaybethesubjectof patentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. Int

13、ernationalStandardISO17057waspreparedbyTechnicalCommitteeISO/TC20, Aircraft and space vehicles, SubcommitteeSC4, Aerospace fastener systems. AnnexAformsanormativepartofthisInternationalStandard.INTERNATIONALSTANDARD ISO17057:1999(E)1 AerospaceRivets,solidTestmethod 1 Scope ThisInternationalStandards

14、pecifiesthetestmethodforsolidrivets.Itdescribesthetestdeviceandthemethod. Itappliestorivetsintendedforuseinaerospaceconstructioninconjunctionwiththerelevantprocurement specification,providedthatthespecificationreferstothisInternationalStandard. 2 Normativereference Thefollowingnormativedocumentconta

15、insprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyingthemo

16、strecenteditionofthenormativedocumentindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternationalStandards. ISO7500-1:1999, Metallic materials Verification of static uniaxial testing machines Part 1: Te

17、nsion/com- pression testing machines Verification and calibration of the force-measuring system. 3 Doubleshearinspectionandtest 3.1 Apparatus 3.1.1 Testingmachine,theaccuracyofwhichshallbeverifiedtotherequirementsofISO7500-1:1999,with classoftestingmachinerange1,0. Thetestmachineshallbecalibratedass

18、pecifiedinannexA. 3.1.2 Testfixture,madeofsteelwithaminimumhardnessof530HV30.Thedimensionsofthefixtureshallbe inconformitywiththoseinFigure1. Tominimizethepossibleeffectofdistortionofthefixtureunderload,fittedmachinedsteelboltsshallbeused. Theinterfacesbetweenthemiddlepartandthelegpartshallbewellpol

19、ished. 3.2 Procedure 3.2.1 Placetherivetorrivetingwireinthetestfixturesothatcontactismadewiththefullbearingsurface. 3.2.2 RecordthemaximumloadFtofracture.ISO17057:1999(E) 2 Shearstrengthis: R F d F d s a a 0,5 F H G G I K J J 2 2 4 2 whered a istheactualdiameterofthespecimenattheshearzone. 3.2.3 The

20、speedoftestingshallbelessthanorequalto20mm/min(0,75in/min). 3.2.4 Thetestmaybediscontinuedwithoutacompleteshearfailureoncetherequiredminimumultimatetest loadhasbeenachieved.ISO17057:1999(E)3 Dimensionsinmillimetres (Dimensionsininchesinparentheses) d isthenominaldiameterofwireorrivet r istheresultin

21、gradiussubsequenttowearoftheedgesofthe diameterd 1 hole d 1 =1,020d 0,075mm 0,015mm(0,003in 0,0006in) ru0,13mm(0,005in) S 1 =d 03 0 0012, ,mm in 0 ej S 2 =S 1 0025 0001,mm in 0 +0,03mm 0 +0,0012in ej S 3 =6mm 0,4mm(0,25in 0,016in)for d=1,5mm(0,063in)to4mm(0,156in) 12mm 0,4mm(0,5in 0,016in)for d=5mm(

22、0,188in)to10mm(0,375in) Toleranceson0,5d: 0 +0,03mm 0 +0,0012in ej Key 1 FittedM10(0,375)steelbolts Figure1ISO17057:1999(E) 4 AnnexA (normative) Calibrationoftestapparatus Testapparatusinuseshallbecalibratedperiodicallyatintervalsnotexceeding12monthsbyoneofthefollowing means: a)anationalofficialbody

23、; b)anorganizationcontrolledbyanationalofficialbody; c)byusingstandardsordeviceswhicharetraceablebacktoanationalstandardsbody.BS A 364:2000 ISO 17057:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

24、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standar

25、ds in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of

26、 our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI

27、 offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 0

28、20 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and internati

29、onal standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are k

30、ept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the

31、 copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or o

32、therwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.