BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf

《BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf》由会员分享，可在线阅读，更多相关《BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD AEROSPACE SERIES BS A 359

2、:2000 ISO 12278:1999 ICS 49.030.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Nuts, barrel, self-locking, floating, with MJ threads, classifications: 900 MPa (at ambient temperature)/2358C, 1100 MPa (at ambient temperature)/2358C, 1250 MPa (at ambient temperature)/2358C,

3、1550 MPa (at ambient temperature)/2358C DimensionsThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 2000 BSI 03-2000 ISBN 0 580 34422 3 BS A 359:2000 Amen

4、dments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 12278:1999 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening syst

5、ems to Subcommitte ACE/12/1, Aerospace fasteners and fastening systems (Inernational), which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European Subcommittee any enquiries on the interpretation, or proposals for change, and keep the UK i

6、nterests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to i

7、n this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract.

8、 Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page,

9、pages 1 to 3 and a back cover. The BSI copyright notice displayed throughout this document indicates when the document was last issued.A Referencenumbe r ISO12278:1999 (E) INTERNATIONAL STANDARD ISO 12278 Firstedition 19991101 AerospaceNuts,barrel,selflocking, floating,selfaligning,withMJthreads, cl

10、assifications:900MPa(atambient temperature)/235C,1100MPa(atambient temperature)/235C,1250MPa(atambient temperature)/235Cand1550MPa(at ambienttemperature)/235C Dimensions Aronautiqueetespacecrousportecylindrique,freinageinterne, flottants,orientables,filetageMJ,classifications:900MPa(temprature ambia

11、nte)/235C,1100MPa(tempratureambiante)/235C, 1250MPa(tempratureambiante)/235Cet1550MPa (tempratureambiante)/235CDimensions BS A 359:2000ii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalSta

12、ndardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselyw

13、iththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. Publication

14、asanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO 12278waspreparedbyTechnicalCommitteeISO/TC 20,Aircraftandspacevehicles , SubcommitteeSC4, Aerospacefastenersystems . BS A 359:2000iii Introduction ThedimensionsspecifiedinthisInternationalSta

15、ndardhavebee ndeterminedtoallowproductionofapartwhich willsatisfytherequirementsoftheprocurementspecificationISO 5858:1999,AerospaceSelflockingnutswith maximumoperatingtemperaturelessthanorequalto425CProcurementspecification . BS A 359:2000BS A 359:2000DRADNATSLANOITANRETNI OSI )E(9991:87221OSI 1 Ae

16、rospaceNuts,barrel,selflocking,floating,selfaligning,with MJthreads,classifications: 900MPa(atambienttemperature)/235C,1100MPa(atambient temperature)/235C,1250MPa(atambienttemperature)/235C and1550MPa(atambienttemperature)/235CDimensions 1Scope ThisInternationalStandardspecifiesthedimensionsofselflo

17、cking,floating,selfaligningbarrelnuts, with MJthreads, for classifications: 900MPa 1) /235C 2) , 1100MPa 1) /235C 2) , 1250MPa 1) /235C 2) and 1550MPa 1) /235C 2) . ThisInternationalStandardisonlyapplicableforthecompilationofaerospaceproductstandards. 2Normative reference Thefollowingnormativedocume

18、ntcontainsprovisionswhich,throughreferenceinthistext,constituteprovisionsof thisInternationalStandard.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthese publicationsdonotapply.However,partiestoagreementsbasedonthisInternationalStandardareencouragedto investigatethepossibilityofapplyi

19、ngthemostrecenteditionofthenormativedocumentindicatedbelow.For undatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIEC maintainregistersofcurrentlyvalidInternationalStandards. ISO58552:1999, AerospaceMJthreadsPart2:Limitdimensionsforboltsandnuts . 3 Configuration

20、anddimensions SeeFigure1andTable1.Dimensionsandtolerancesareexpressedinmillimetres.Theyapplyafteranysurface coating(s)butbeforetheapplicationofanylubricant. 1) Correspondstotheminimumtensilestresswhichthenutisabletowithstandatambienttemperaturewithoutbreakingor crackingwhentestedwithaboltofahigherst

21、rengthclass. 2) Maximumtemperaturethatthenutisabletowithstand,withoutpermanentalterationtoitsoriginalcharacteristics,after ambienttemperaturehasbeenrestored.Themaximumtemperatureisconditionedbythesurfacetreatment. BS A 359:2000)E(9991:87221OSI OSI 2 Key 1 Threadelement 2 Cradle NOTE Detailsofformnot

22、statedareatthemanufacturersoption. a Thesevalues,inmicrometres,applybeforeanysurfacecoating(s)is(are)applied.Thevaluesdonotapplytothreads, punchedholesorshearedgesthesurfacetextureofwhichwillbeasachievedbytheusualmanufacturingmethods. b Thread c Formoutofroundinthisareatoachievetheselflockingtorquer

23、equirement.Toolingmarkspermissibleinthisarea. d Meansofretainingnutincradlearemanufacturersoptionprovidingenvelopeandperformancerequirementsaremet. e Radialfloat:0,4min. Figure1 BS A 359:2000OSI )E(9991:87221OSI 3 Table1 Diameter code Thread a FGHKNPT Installation holesize - 01 0 , 0,25 max. max. -

24、025 0 , 0 025 + , max. 060 MJ6 14H5H 12,9 14 10,6 9,5 3,35 6,8 8,2 13 070 MJ7 14H5H 13,9 15 11,5 9,8 3,7 7,8 9,5 14 080 MJ8 14H5H 14,9 17 12 10,2 8,8 9,9 15 100 MJ10 1,254H5H 17,9 20 15 12,5 4,6 10,8 12 18 120 MJ12 1,254H5H 21,9 24 18,1 15,7 5,7 12,8 14,2 22 140 MJ14 1,54H5H 25,9 28 22,2 17,2 6,5 14

25、,8 16,5 26 160 MJ16 1,54H5H 29,9 32 25,7 19,5 7,55 16,8 18,6 30 180 MJ18 1,54H5H 32,9 36 26,2 22 8,45 18,8 20,8 33 200 MJ20 1,54H5H 36,9 40 29,3 25,5 9,6 20,8 23 37 220 MJ22 1,54H5H 40,9 44 32,1 26 10,35 22,8 25,2 41 240 MJ24 24H5H 43,9 48 35 28,6 11,25 24,8 27,5 44 270 MJ27 24H5H 49,9 54 39,3 31,5

26、12,55 27,8 30,7 50 300 MJ30 24H5H 55,9 60 43,7 34,8 13,95 30,8 34 56 330 MJ33 24H5H 61,9 66 48,1 38 15,35 33,8 37,3 62 360 MJ36 24H5H 67,9 72 52,4 41,5 16,65 36,8 40,6 68 390 MJ39 24H5H 73,9 78 56,8 45 18,05 39,8 44 74 a InaccordancewithISO58552.Intheselflockingzone,thetolerancesapplybeforeformingou

27、tofround. BS A 359:2000BS A 359:2000 ISO 12278:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

28、 | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Sta

29、ndards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while usi

30、ng this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically

31、 receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI imp

32、lementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic

33、information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of s

34、tandards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permi

35、tted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course

36、of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.