BS 8529-2017 Composite doorsets Domestic external doorsets Specification《复合门装置 家用外部门装置 规范》.pdf

《BS 8529-2017 Composite doorsets Domestic external doorsets Specification《复合门装置 家用外部门装置 规范》.pdf》由会员分享，可在线阅读，更多相关《BS 8529-2017 Composite doorsets Domestic external doorsets Specification《复合门装置 家用外部门装置 规范》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BS 8529:2017Composite doorsetsDomestic external doorsets SpecicationBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Publishing and copyright informationThe BSI copyright notice displayed in this document indicates when the document was last issued. The British Standa

2、rds Institution 2017Published by BSI Standards Limited 2017ISBN 978 0 580 93701 9ICS 91.060.50The following BSI references relate to the work on this document: Committee reference B/538/1 Draft for comment 16/30339191 DCAmendments/corrigenda issued since publicationDate Text affected BS 8529:2017 BR

3、ITISH STANDARD THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS RESERVEDForeword ii1 Scope 12 Normative references 13 Terms and denitions 24 Handing 45 Components 46 Construction and design 67 Appearance and nish 78 Glazing 89 Installation, use, cleaning and maintenance 810 Thermal cycling 811 Secu

4、rity 812 Safety in case of re 813 Safety in use 914 Weathertightness 915 Operation and strength characteristics 916 Hygiene, health and environment 917 Acoustic performance 918 Energy conservation 919 Marking 10Annex A (normative) Specication for handing 11Figure A.1 Drawing conventions for door typ

5、es 11Annex B (normative) Thermal cyclic test 11Figure B.1 Matt black copper disc 12Figure B.2 Lamp grid nominal dimensions 12Figure B.3 Thermal cyclic test 13Bibliography 14Contents PageSummary of pagesThis document comprises a front cover, and inside front cover, pages i to ii, pages 1 to 14, an in

6、side back cover and a back cover.BRITISH STANDARD BS 8529:2017 THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS RESERVED IForewordPublishing informationThis British Standard is published by BSI Standards Limited, under licence from The British Standards Institution, and came into effect on 31 Augus

7、t 2017. It was prepared by Technical Committee B/538/1, Windows and doors. A list of organizations represented on this committee can be obtained on request to its secretary.SupersessionThis British Standard supersedes BS 8529:2010, which is withdrawn.Relationships with other publicationsThis British

8、 Standard is related to the following standards.a) BS 6375 (all parts) are the national application documents in the UK, giving performance requirements and guidance for the selection of appropriate classes of performance from BS EN 143511.b) BS 82134 provides guidance on the survey and installation

9、 of replacement external pedestrian doorsets.c) BS EN 143511 is the harmonized European product standard for windows and external pedestrian doorsets without resistance to re and smoke leakage characteristics. It gives a list of performance characteristics and classications of performance, but does

10、not give guidance on determining the appropriate classication for any specic application.d) BS EN 16034 is the harmonized European Standard detailing the fireresistant and smoke control performance characteristics for windows and doorsets. This standard is used in conjunction with BS EN 143511 to pr

11、ovide a full list of characteristics that external doorsets can have. All characteristics shown in BS EN 16034, unlike those shown in BS EN 143511, are essential characteristics and can be declared when placing a fireresisting and/or smoke control doorset on the European market in accordance with th

12、e Construction Products Regulation 1.Presentational conventionsThe provisions of this standard are presented in roman (i.e. upright) type. Its requirements are expressed in sentences in which the principal auxiliary verb is “shall”.Commentary, explanation and general informative material is presente

13、d in smaller italic type, and does not constitute a normative element.Requirements in this standard are drafted in accordance with Rules for the structure and drafting of UK standards, subclause G.1.1, which states, “Requirements should be expressed using wording such as: When tested as described in

14、 Annex A, the product shall .”. This means that only those products that are capable of passing the specified test will be deemed to conform to this standard.Contractual and legal considerationsThis publication does not purport to include all the necessary provisions of a contract. Users are respons

15、ible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Attention is drawn to the Building Regulations 2010 and subsequent amendments 2, the Building (Scotland) Regulations 2004 3 and the Building Regulations (Northern Ireland) 2012 4.BS 8529

16、:2017 BRITISH STANDARDII THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS RESERVED1 ScopeThis British Standard species requirements for the design, construction and performance of domestic external composite doorsets.This British Standard applies to the following types of doorset:a) hinged sidehung

17、 single leaf (handed); andb) hinged double leaf.This British Standard is applicable to doors that are supplied fully nished, part nished or unnished.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes provisions of thi

18、s document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.Standards publicationsBS 644, Timber windows and doorsets Fully finished factoryassembled windows and doorsets of various types S

19、pecificationBS 4873, Aluminium alloy windows and doorsets SpecificationBS 610012, Building and civil engineering Vocabulary Part 12: Plant, equipment and personsBS 62621, Glazing for buildings Part 1: General methodology for the selection of glazingBS 62622, Glazing for buildings Part 2: Code of pra

20、ctice for energy, light and soundBS 62623, Glazing for buildings Part 3: Code of practice for fire, security and wind loadingBS 62624, Glazing for buildings Part 4: Code of practice for safety related to human impactBS 62626, Glazing for buildings Part 6: Code of practice for special applicationsBS

21、62627, Glazing for buildings Part 7: Code of practice for the provision of informationBS 63751, Performance of windows and doors Classification for weathertightness and guidance on selection and specificationBS 63752:2009, Performance of windows and doors Classification for operation and strength ch

22、aracteristics and guidance on selection and specificationBS 63753:2009+A1:2013, Performance of windows and doors Classification for additional performance characteristics and guidance on selection and specificationBS 7412, Specification for windows and doorsets made from unplasticized polyvinyl chlo

23、ride (PVCU) extruded hollow profilesBS 7722:2010, Surface covered PVCU profiles for windows and doorsets SpecificationBS 80007, Workmanship on building sites Part 7: Code of practice for glazingBS EN 4852, Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical propertiesBS EN 515,

24、Aluminium and aluminium alloys Wrought products Temper designationsBRITISH STANDARD BS 8529:2017 THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS RESERVED 1BS EN 7552, Aluminium and aluminium alloys Extruded rod/bar, tube and proles Part 2: Mechanical propertiesBS EN 7559, Aluminium and aluminium a

25、lloys Extruded rod/bar, tube and proles Part 9: Proles, tolerances on dimensions and formBS EN 942:2007, Timber in joinery General requirementsBS EN 1027:2000, Windows and doors Watertightness Test methodBS EN 1279 (all parts), Glass in building Insulating glass unitsBS EN 1670:2007, Building hardwa

26、re Corrosion resistance Requirements and test methodsBS EN 10346:2009, Continuously hotdip coated steel flat products Technical delivery conditionsBS EN 12020 (all parts), Aluminium and aluminium alloys Extruded precision proles in alloys EN AW6060 and EN AW6063BS EN 123651, Building hardware Gasket

27、 and weatherstripping for doors, windows, shutters and curtain walling Part 1: Performance requirements and classificationBS EN 12519, Windows and pedestrian doors TerminologyBS EN 126081, Unplasticized poly(vinyl chloride) (PVCU) profiles for the fabrication of windows and doors Classification, req

28、uirements and test methods Part 1: Noncoated PVCU profiles with light coloured surfacesBS EN 131411, Ventilation for buildings Performance testing of components/products for residential ventilation Part 1: Externally and internally mounted air transfer devicesBS EN 13142, Ventilation for buildings C

29、omponents/products for residential ventilation Required and optional performance characteristicsBS EN 14220, Timber and woodbased materials in external windows, external door leaves and external doorframes Requirements and specicationsBS EN 14374, Timber structures Laminated veneer lumber (LVL) Requ

30、irementsBS EN ISO 105A01:2010, Textiles Tests for colour fastness Part A01: General principles of testingBS EN ISO 2813, Paints and varnishes Determination of gloss value at 20 degrees, 60 degrees and 85 degreesBS ISO 67071, Buildings and civil engineering works Vocabulary Part 1: General termsPAS 2

31、4, Enhanced security performance requirements for doorsets and windows in the UK Doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable riskOther publicationsN1 GLASS AND GLAZING FEDERATION. Guidelines for the selection, installati

32、on, maintenance of hardware for the window and door industry. Data sheet 6.7. London: Glass and Glazing Federation.N2 GLASS AND GLAZING FEDERATION. Guidelines for the selection, installation and maintenance of screws and fasteners for the window and door industries. Data sheet 6.8. London: Glass and

33、 Glazing Federation. 3 Terms and denitionsFor the purposes of this British Standard, the terms and denitions given in BS ISO 67071, BS 610012, BS EN 12519 and the following apply.BS 8529:2017 BRITISH STANDARD2 THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS RESERVED3.1 composite door leafdoor leaf

34、 whose structure contains multiple materials, generally of sandwich construction, contributing to the structural performance of the product3.2 composite doorsethinged or pivoted doorsets with composite based leaf or leaves, with or without glazing in the leaf, and/or a composite door frameNOTE 1 Doo

35、rsets with either the door leaf or the door frame manufactured from a composite material are considered to be composite doorsets and are covered by this British Standard. Composite doorsets may be of double rebate or single rebate construction.NOTE 2 Composite doorsets are manufactured using a varie

36、ty of components. The basic construction of a composite door leaf consists of a door carcass, internal and external door facings, and core material. See Clause 5.3.3 core infillmaterial(s) providing the bulk of the internal core of the door leaf through its thickness (may be surrounded by a subframe

37、 or in one piece)3.4 cycleset of operations required to take a door from the closed and fully locked condition to the fully opened condition and back to the closed and fully locked position3.5 decorative finishouter layer of paint or material on the visible surface of the door leaf normally used for

38、 decorative and not structural purposes3.6 door leafmoving/opening element of the doorset (rotating/opening on the hinge)3.7 doorsetcomplete door system, as installed, comprising door leaf or leaves, door frame, all hardware and any integral glazed side panel or over panel3.8 facingnoncellulosic com

39、posite/plastic, or steel material layer bonded/fixed to the core and/or subframe to the outer surface of the door leaf and forming part of the structure of the door leafNOTE Facings may be covered by a decorative finish.3.9 xingcomponent (typically a screw) that is used to secure separate parts of a

40、 doorset to each other, to secure an item of hardware to a door part, or to secure a doorset into the structure of the building3.10 glazing gasketresilient material used between the glazing and the frame and/or between the glazing and the glazing bead designed to reduce air infiltration, and water,

41、smoke and acoustic penetration3.11 hardwaredevice attached to a structural member of a doorset to facilitate opening, closing or making the product secure in the frameNOTE This is also known as ironmongery.BRITISH STANDARD BS 8529:2017 THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS RESERVED 33.12

42、 outer framepart of a doorset surrounding a door leaf and to which the door leaf is hingedNOTE The outer frame may also be used to support the glazing and/or solid panels in integral and/or coupled side lights or over lights.3.13 subframestructural elements around the perimeter of the door leafNOTE

43、A subframe might not be present where a solid core construction is used.3.14 ventilation deviceventilator incorporated into a doorsetNOTE 1 A permanent ventilation device provides continuous ventilation. A controlled device can be closed and may be adjusted to provide ventilation.NOTE 2 A ventilatio

44、n device is referred to as an air transfer device in BS EN 13142 and is frequently referred to as a trickle ventilator or background ventilator in the UK.3.15 weathersealresilient material designed to reduce infiltration of air, water, smoke and/or sound between the door leaf and door frameNOTE This

45、 is sometimes referred to as a weatherstrip.4 HandingThe handing shall be in accordance with the specication provided to the manufacturer.Where the manufacturer is specifying the handing, the specication shall conform to Annex A.NOTE Where the manufacturer is not specifying the handing, the handing

46、specification should be checked and confirmed. See Annex A.5 ComponentsCOMMENTARY ON CLAUSE 5Door facings used in composite doorsets are made from a variety of materials. The performance of the facings can only be assessed by testing the whole doorset in accordance with the appropriate British Stand

47、ard. Examples of materials successfully used include:a) thermoplastic;b) bre reinforced thermosets;c) steel; andd) aluminium.5.1 Doorset outer frameDoorset outer frame materials used in composite doorsets shall, where applicable, conform to the appropriate product standards, including:a) BS 7722:201

48、0 or BS EN 126081 for unplasticized polyvinyl chloride (PVCU);b) BS EN 4852, BS EN 515, BS EN 7552, BS EN 7559 or BS EN 12020 (all parts) for aluminium;c) BS EN 10346:2009, coating Z275, for steel sheet or box section;BS 8529:2017 BRITISH STANDARD4 THE BRITISH STANDARDS INSTITUTION 2017 ALL RIGHTS R

49、ESERVEDd) BS EN 942:2007 for solid timber, specically class J50 for frames;e) BS EN 14374 for engineered timber; and/orf) BS EN 14220 for all timber products.NOTE There are new materials available for which no product standard has yet been published. Such materials may be used provided that the nished doorset meets the thermal cycling requirement specied in Clause 10, togeth