BS 6843-3-1988 Classification of petroleum fuels - Liquefied petroleum gases《石油燃料的分类 第3部分 液化石油气体》.pdf

《BS 6843-3-1988 Classification of petroleum fuels - Liquefied petroleum gases《石油燃料的分类 第3部分 液化石油气体》.pdf》由会员分享，可在线阅读，更多相关《BS 6843-3-1988 Classification of petroleum fuels - Liquefied petroleum gases《石油燃料的分类 第3部分 液化石油气体》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD CONFIRMED AUGUST 1992 BS6843-3: 1988 ISO8216-3: 1987 Classification of petroleum fuels Part 3: Liquefied petroleum gases ISO title: Petroleum products Fuels (class F) Classification Part3: Family L (Liquefied petroleum gases UDC 665.6.73.74.75.76.761.777.4:665.725:005.168.2BS6843-3:

2、1988 This British Standard, having been prepared under the directionof the Petroleum Standards Committee, was published underthe authority ofthe Board ofBSI and comes intoeffect on 29 February1988 BSI 04-1999 The following BSI references relate to the work on this standard: Committee reference PTC/1

3、0 Draft for comment86/50527 DC ISBN 0 580 16349 0 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Petroleum Standards Committee (PTC/-) to Technical Committee PTC/10, upon which the following bodies were represented: British Compressed G

4、ases Association British Fire Services Association Chemical Industries Association Department of Energy (Oil Division) Institute of Petroleum Liquefied Petroleum Gas Industry Technical Association (UK) Royal Society of Chemistry Society of British Gas Industries Society of Motor Manufacturers and Tr

5、aders Limited United Kingdom Petroleum Industry Association Ltd. Amendments issued since publication Amd. No. Date of issue CommentsBS6843-3:1988 BSI 04-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Explanation

6、of symbols 1 4 Detailed classification of liquefied petroleum gases 1 Publication referred to Inside back pageBS6843-3:1988 ii BSI 04-1999 National foreword This Part of BS6843 has been prepared under the direction of the Petroleum Standards Committee. It is identical with ISO8216-3:1987 “Petroleum

7、products Fuels (class F) Classification Part3: Family L (Liquefied petroleum gases)” published by the International Organization for Standardization (ISO). ISO8216-3 was prepared as a result of discussion in subcommittee4, Classifications and specifications, of Technical Committee28, Petroleum produ

8、cts and lubricants, in which the UK participated. A general classification of petroleum products (ISO8681) prepared in ISO/TC28 has allocated class F to petroleum fuels. ISO8216 is being issued in several Parts covering the classification of different types of fuel. The following other Parts of BS68

9、43 have been published to implement the corresponding Parts of ISO8216. Part 0: General classification; Part 1: Marine fuels; Part 2: Gas turbine fuels for industrial and marine applications. Terminology and conventions. The text of the international standard has been approved as suitable for public

10、ation as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards. Attention is drawn especially to the following. Wherever the words “part of ISO8216” appear, referring to this standard, they should be read as “Part of BS6

11、843”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International stand

12、ard Corresponding British Standard ISO 8216/0-1986 BS 6843 Classification of petroleum fuels Part 0:1987 General classification (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 and2, an inside back cover and a back cover. This standard

13、 has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.BS6843-3:1988 BSI 04-1999 1 1 Scope and field of application This part of ISO8216 establishes the detailed classification of liquefied petroleum gas

14、es within class F (Petroleum fuels). It should be read in conjunction with ISO8216/0. Liquefied petroleum gases may be derived from crude oil processing or recovered from natural gas and/or crude oil production. 2 Reference ISO8216/0, Petroleum products Fuels (class F) Classification Part0: General.

15、 3 Explanation of symbols 3.1 The detailed classification of liquefied petroleum gases has been established from their compositions. 3.2 According to ISO8216/0, the products are designated by a symbol consisting of the initials ISO; the letter F (for the class fuels); the category of fuel, consistin

16、g of2letters, the first letter designating the family (L for liquefied petroleum gases). The second letter, taken separately, has no significance on its own. 3.3 In this classification system, products are designated in a uniform manner. For example, a product may be designated in the complete form,

17、 i.e.ISO-F-LP, or in the abbreviated form, i.e.F-LP. 4 Detailed classification of liquefied petroleum gases Family Designation ISO-F Category Remarks Liquefied petroleum gases LP Hydrocarbon product composed predominantly of propane and/or propene; the remaining part may consist mainly of ethane/eth

18、ene and butane/butene isomers. LB Hydrocarbon product composed predominantly of butanes and/or butenes; the remaining part may consist mainly of propane/propene and pentane/pentene isomers.2 blankBS6843-3:1988 BSI 04-1999 Publication referred to See national foreword.BS6843-3: 1988 ISO8216-3: 1987 B

19、SI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are u

20、pdated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this Briti

21、shStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest

22、editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that

23、have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are al

24、so available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these an

25、d other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Pa

26、tents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessa

27、ry details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.