BS 4737-5 2-1988 Intruder alarm systems Terms and symbols Recommendations for symbols for diagrams《擅入者报警系统 第5部分 术语和符号 第2节 图示符号推荐标准》.pdf

《BS 4737-5 2-1988 Intruder alarm systems Terms and symbols Recommendations for symbols for diagrams《擅入者报警系统 第5部分 术语和符号 第2节 图示符号推荐标准》.pdf》由会员分享，可在线阅读，更多相关《BS 4737-5 2-1988 Intruder alarm systems Terms and symbols Recommendations for symbols for diagrams《擅入者报警系统 第5部分 术语和符号 第2节 图示符号推荐标准》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 4737-5.2: 1988 Intruder alarm systems Part 5: Terms and symbols Section 5.2 Recommendations for symbols for diagrams UDC 696.6:654.924.3:(084.21)+003.62BS4737-5.2:1988 This British Standard, having been prepared under the direction of the Furniture and Household Equipment Standar

2、dsCommittee, was published under the authority ofthe Board of BSI and comesintoeffect on 31August1988 BSI 01-1999 The following BSI references relate to the work on this standard: Committee reference FHM/45 Draft for comment 87/39307 DC ISBN 0 580 16716 X Committees responsible for this British Stan

3、dard The preparation of this British Standard was entrusted by the Furniture and Household Equipment Standards Committee (FHM/-) to Technical Committee FHM/45, upon which the following bodies were represented: Association for Payment Clearing Services Association of British Insurers Association of B

4、urglary Insurance Surveyors Association of Chief Police Officers of England and Wales Association of Metropolitan Authorities British Retailers Association British Security Industry Association British Telecommunications plc Construction Security Advisory Service Consumer Policy Committee of BSI Dep

5、artment of the Environment (Property Services Agency) Electrical Contractors Association Electrical Contractors Association of Scotland Electrical Installation Equipment Manufacturers Association (BEAMA Ltd.) Electricity Supply Industry in England and Wales Electronic Engineering Association Home Of

6、fice (Crime Prevention Centre) Independent Associated Alarm Installers Ltd. Institution of Electrical and Electronics Incorporated Engineers Lloyds Syndicates Metropolitan Police Ministry of Defence National Association of Goldsmiths of Great Britain and Ireland National Supervisory Council for Intr

7、uder Alarms Ltd. Post Office Royal Institute of British Architects Telecommunication Engineering and Manufacturing Association (TEMA) Tobacco Advisory Council Wine and Spirit Security Liaison Ltd. Amendments issued since publication Amd. No. Date of issue CommentsBS4737-5.2:1988 BSI 01-1999 i Conten

8、ts Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 General 1 3 Detection devices 2 4 Warning and signalling equipment 8 5 Control and indicating equipment 9 6 Power supply equipment 10 7 Surveillance equipment 11 8 Other equipment 12 9 Links and interconnections 13 Appendix A

9、Diagrams of a typical intruder alarm system using symbols in this standard 14 Figure 1 System interconnections 14 Figure 2 Equipment with respect to premises 15 Publication referred to Inside back coverBS4737-5.2:1988 ii BSI 01-1999 Foreword This Section of BS4737 has been prepared under the directi

10、on of the Furniture and Household Equipment Standards Committee. BS 4737-5 provides definitions for terms used in the intruder alarm industry and symbols for use in diagrams of alarm systems, with the objective of reducing confusion and misunderstanding in documents relating to intruder alarm instal

11、lations. This Section of BS4737 gives the symbols to be used when indicating on a diagram the type, position and/or interconnection of the component parts of an installed intruder alarm system. BS 4737 is being revised and published in Parts as follows: Part 1: Specification for installed systems wi

12、th local audible and/or remote signalling; Part 2: Specification for installed systems for deliberate operation; Part 3: Specification for components (incorporating a revision of the existing Sections 3.1 to 3.14 of BS4737); Part 4: Codes of practice; Part 5: Terms and symbols; Section 5.1: Glossary

13、 of terms; Section 5.2: Recommendations for symbols for diagrams. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity

14、 from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 to 16, aninside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amen

15、dment table on theinside front cover.BS4737-5.2:1988 BSI 01-1999 1 1 Scope This Section of BS4737 recommends symbols for use in diagrams of installed intruder alarm systems. In particular, it provides the means for conveying pictorially information required to be included in the system record of an

16、installed intruder alarm system. NOTEThe titles of the publications referred to in this Section of BS4737 are listed on the inside back cover. 2 General The symbols given in this standard are primarily intended for use when providing, in pictorial form, information required for inclusion in the syst

17、em record of an installed intruder alarm system. NOTENot all of the information required for a system record can be provided by means of a diagram. For reasons of security these symbols are not, of necessity, required to be given in system designs, specifications or on building plans. However, where

18、 symbols are included in any documentation concerning intruder alarm systems, the symbols given in this standard should be used. A symbol cannot convey in every case the extent and degree of information required regarding a component of a system and additional explanatory text will be required in ce

19、rtain situations. In particular, the use of a detector symbol will not always provide sufficient information with regard to its coverage and should be accompanied by an indication of this, if it is not self-evident. Where the symbols given in this standard form part of a circuit diagram of a system,

20、 the rest of the components and elements of the system should be shown by means of appropriate symbols from BS3939. The general symbol for an intruder alarm system component is an outline shape identifying the nature of its function; specific symbols have a character or device, i.e. a symbol element

21、, inserted into the appropriate outline shape. The outline shapes chosen for the general symbols can all be drawn with the aid of a readily available computer flowchart stencil, without confusion with the symbols for computer functions; general symbols are identified in this standard by the figure0

22、as the last digit of the serial number. Additional symbols can be generated by the insertion of the appropriate symbol element(s) into the general symbol outline. Preferred sizes for symbols are not given in this standard, but the size used should correspond with the scale of the diagram in which th

23、ey are included whilst remaining legible and without risk of confusion between similar symbols. Diagrams of a typical intruder alarm installation using symbols in this standard are given in appendixA. Diagrams showing system interconnections, such as the example given in A.1, should use the symbols

24、in the orientations shown in this standard. Diagrams showing the disposition of equipment with respect to protected premises, such as the example given in A.2, may use the symbols in appropriate orientations to indicate positioning and/or direction of coverage of component parts of the system.BS4737

25、-5.2:1988 2 BSI 01-1999 3 Detection devices Serial number Symbol element Type of device Symbol 3.1.0 Protective switch 3.1.1 Magnetically-operated protective switch 3.1.2 Pressure pad 3.1.3 Pressure strip 3.1.4 Spring or gravity clip 3.1.5 Deliberately-operated device (manual) 3.1.6 Deliberately-ope

26、rated device (foot)BS4737-5.2:1988 BSI 01-1999 3 Serial number Symbol element Type of device Symbol 3.2.0 Movement detector 3.2.1 Ultrasonic doppler detector 3.2.2 Microwave doppler detector 3.2.3 Infra-red (passive) detector 3.2.4 Volumetric capacitive detector 3.2.5 Video motion detectorBS4737-5.2

27、:1988 4 BSI 01-1999 Serial number Symbol element Type of device Symbol 3.3.0 Vibration, proximity or environmental detector 3.3.1 Vibration detector (structural or inertia) 3.3.2 Acoustic detector (airborne vibration) 3.3.3 Glass-break detector (surface contact) 3.3.4 Capacitive proximity detector 3

28、.3.5 Heat detector 3.3.6 Light detector 3.3.7 Smoke (cutting by burning) detector 3.3.8 Metal detectorBS4737-5.2:1988 BSI 01-1999 5 Serial number Symbol element Type of device Symbol 3.4.0 Wire or foil detector 3.4.1 Continuous wire detector 3.4.2 Continuous wire in tube/rod detector 3.4.3 Rigid pri

29、nted circuit detector 3.4.4 Foil on glass detectorBS4737-5.2:1988 6 BSI 01-1999 Serial number Symbol element Type of device Symbol 3.5.0 Beam, fence or field disturbance detector (with identification of transmitter and receiver, if appropriate) 3.5.1 Infra-red beam interruption detector 3.5.2 Microw

30、ave fence detector 3.5.3 Electrostatic or electromagnetic fence detector 3.5.4 Buried line field disturbance detector 3.5.5 Flex or shock sensitive cable detector 3.5.6 Microphonic cable detector 3.5.7 Fibre optic cable detector 3.5.8 Tensioned wire detector 3.5.9 Pressure differential detectorBS473

31、7-5.2:1988 BSI 01-1999 7 Serial number Symbol element Type of device Symbol 3.6.0 Dual technology detector Appropriate symbol outline incorporating a (seeexamples 3.6.1 and 3.6.2) 3.6.1 Microwave and ultrasonic movement detector 3.6.2 Structural and airborne vibration detector 3.6.3 etc. As appropri

32、ate Other combinations of dual technology detection 3.7.0 Coincidence detectors Appropriate linked symbol outlines (seeexample3.7.1) 3.7.1 Passive infra-red movement detectors 3.7.2 etc. As appropriate Other combinations of coincidence detectionBS4737-5.2:1988 8 BSI 01-1999 4 Warning and signalling

33、equipment Serial number Symbol element Type of device Symbol 4.1.0 Warning or signalling device (with integral power supply) 4.1.1 Bell 4.1.2 Siren 4.1.3 Beacon 4.1.4 Dial-up remote signalling equipment 4.1.5 Monitored direct line remote signalling equipment (out only) 4.1.6 Monitored direct line re

34、mote signalling equipment (two-way) 4.1.7 etc. Combination, e.g. Bell and beaconBS4737-5.2:1988 BSI 01-1999 9 5 Control and indicating equipment (For ancillary control equipment, see 8.1.6) Serial number Symbol element Type of device Symbol 5.1.0 Control panel (with integral power supply) 5.1.1 Key

35、operated control equipment 5.1.2 Keypad operated control equipment 5.1.3 Timer or programmer-operated control equipment 5.1.4 Visible indication 5.1.5 Audible indication 5.1.6 Visual display facility 5.1.7 Print-out facility 5.1.8 etc. Combination, e.g. of key operation with visible and audible indi

36、cationsBS4737-5.2:1988 10 BSI 01-1999 6 Power supply equipment Serial number Symbol element Type of device Symbol 6.1.0 Power supply unit (not shown separately if integral with other equipment) 6.1.1 Mains supply power source 6.1.2 Transformer or charger unit 6.1.3 Battery or standby battery, primar

37、y 6.1.4 Battery or standby battery, rechargeable 6.1.5 Standby generator 6.1.6 etc. Combination, e.g. of rechargeable battery and transformed chargerBS4737-5.2:1988 BSI 01-1999 11 7 Surveillance equipment Serial number Symbol element Type of device Symbol 7.1.0 Surveillance device 7.1.1 Audio survei

38、llance device (microphone) 7.1.2 Security camera, still-frame 7.1.3 Security camera, videoBS4737-5.2:1988 12 BSI 01-1999 8 Other equipment Serial number Symbol element Type of device Symbol 8.1.0 General symbol (for unspecified devices) 8.1.1 Sensor 8.1.2 Processor 8.1.3 Transmitter 8.1.4 Receiver 8

39、.1.5 Transceiver 8.1.6 As for control equipment, see clause5 Ancillary control equipment (example) 8.1.7 End-of-line deviceBS4737-5.2:1988 BSI 01-1999 13 9 Links and interconnections Serial number Symbol element Type of link Symbol (examples) 9.1.0 (between component symbol) Hard-wired interconnecti

40、on (not implying any specific number of cores to a cable) 9.2.0 (joining the mid points of appropriate symbols Linked or associated components (hard-wired or wire-free) 9.3.0 (centrally overthe appropriate symbol) Wire-free equipmentBS4737-5.2:1988 14 BSI 01-1999 Appendix A Diagrams of a typical int

41、ruder alarm system using symbols in this standard A.1 System interconnections Figure 1 shows system interconnections using the symbols in the orientations shown in this standard. Figure 1 System interconnectionsBS4737-5.2:1988 BSI 01-1999 15 A.2 Equipment with respect to premises Figure 2 shows the

42、disposition of equipment with respect to protected premises. Figure 2 Equipment with respect to premises16 blankBS4737-5.2:1988 BSI 01-1999 Publication referred to BS 3939, Guide for graphical symbols for electrical power, telecommunications and electronics diagrams.BSI 389 Chiswick High Road London

43、 W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI

44、is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make s

45、ure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee respon

46、sible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, inter

47、national and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise

48、requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and se

49、rvices. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under th