BS 4361-27-1990 Woodworking machines - Nomenclature for disc sanding machines with spindle in fixed position《木工机械 第27部分 带固定轴的盘式砂光机命名》.pdf

《BS 4361-27-1990 Woodworking machines - Nomenclature for disc sanding machines with spindle in fixed position《木工机械 第27部分 带固定轴的盘式砂光机命名》.pdf》由会员分享，可在线阅读，更多相关《BS 4361-27-1990 Woodworking machines - Nomenclature for disc sanding machines with spindle in fixed position《木工机械 第27部分 带固定轴的盘式砂光机命名》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 4361-27: 1990 ISO 9375:1989 Woodworking machines Part 27: Nomenclature for disc sanding machines with spindle in fixed positionBS4361-27:1990 This British Standard, having been prepared under the directionof the Machine, Engineers and Hand Tool Standards Policy Committee, waspubl

2、ished under the authorityof the BoardofBSIandcomes into effect on 29 June 1990 BSI 11-1990 The following BSI references relate to the work on this standard: Committee reference MTE/23 Draft for comment 87/70846 DC ISBN 0 580 18484 6 Committees responsible for this British Standard The preparation of

3、 this British Standard was entrusted by the Machine, Engineers and Hand Tool Standards Policy Committee (MTE/-) to Technical Committee MTE/23, upon which the following bodies were represented: Advanced Manufacturing Technology Research Institute British Furniture Manufacturers Federation British Rai

4、lways Board British Woodworking Federation Department of the Environment, Building Research Establishment (PrincesRisborough Laboratory) Department of Trade and Industry, Mechanical Engineering and Manufacturing Technology Division (Mmt) Federation of British Hand Tool Manufacturers Furniture Indust

5、ry Research Association Furniture, Timber and Allied Trades Union Health and Safety Executive Institute of Machine Wood Working Technology Ltd. National Sawmilling Association Saw Association Timber Research and Development Association Union of Construction, Allied Trades and Technicians Woodworking

6、 Machinery Suppliers Association Ltd. Amendments issued since publication Amd. No. Date CommentsBS4361-27:1990 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Nomenclature 2 Annex A Equivalent terms 4 Publication referred to Inside back coverBS4

7、361-27:1990 ii BSI 11-1999 National foreword This Part of BS 4361 has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee and implements agreements of the International Organization for Standardization (ISO). It is identical with ISO 9375:1989 “Woodw

8、orking machines Disc sanding machines with spindle in fixed position Nomenclature”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itse

9、lf confer immunity from legal obligations. Cross-references International Standard Corresponding British Standard ISO 7984:1988 BS 4361 Woodworking machines Part 0:1990 Classification of woodworking machines and auxiliary machines used for woodworking (Identical) Summary of pages This document compr

10、ises a front cover, an inside front cover, pages i and ii, pages1 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS4361-27:1990 BSI 11-1

11、999 1BS4361-27:1990 2 BSI 11-1999BS4361-27:1990 BSI 11-1999 3BS4361-27:1990 4 BSI 11-1999BS4361-27:1990 BSI 11-1999 56 blankBS4361-27:1990 BSI 11-1999 Publication referred to See national foreword.BS 4361-27: 1990 ISO9375:1989 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution B

12、SI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make s

13、ure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee respons

14、ible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, internationa

15、l and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Inf

16、ormation on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contac

17、t the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax

18、:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval syst

19、em or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.