ATIS 0300007-2007 Identification of Physical Network Resources.pdf

《ATIS 0300007-2007 Identification of Physical Network Resources.pdf》由会员分享，可在线阅读，更多相关《ATIS 0300007-2007 Identification of Physical Network Resources.pdf（65页珍藏版）》请在麦多课文档分享上搜索。

1、 AMERICAN NATIONAL STANDARD FOR TELECOMMUNICATIONS ATIS-0300007.2007 IDENTIFICATION OF PHYSICAL NETWORK RESOURCES ATIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards for the information, entertainment and

2、 communications industry. More than 250 companies actively formulate standards in ATIS 20 Committees, covering issues including: IPTV, Service Oriented Networks, Home Networking, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Service, Billing and Operational Support. In addition,

3、numerous Incubators, Focus and Exploratory Groups address emerging industry priorities including “Green”, IP Downloadable Security, Next Generation Carrier Interconnect, IPv6 and Convergence. ATIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a membe

4、r and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more information, please visit . AMERICAN NATIONAL STANDARD Approval of an American National Standard req

5、uires review by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially aff

6、ected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standards is completely voluntary;

7、their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will

8、 in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed

9、to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or

10、withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Notice of Disclaimer ATIS-0300253.2005, Identification of Location Entities for Information Exchange; ATIS-0300213.2006,

11、 Coded Identification of Equipment Entities of the North American Telecommunications System for Information Exchange; and ATIS-0300097.2008, Structure for the Identification of Telecommunications Connections for Information Exchange. Footnotes are not officially part of this standard. ANSI guideline

12、s specify two categories of requirements: mandatory and recommendation. The mandatory requirements are designated by the word shall and recommendations by the word should. Where both a mandatory requirement and a recommendation are specified for the same criterion, the recommendation represents a go

13、al currently identifiable as having distinct compatibility or performance advantages. The Alliance for Telecommunication Industry Solutions (ATIS) serves the public through improved understanding between carriers, customers, and manufacturers. The Telecom Management and Operations Committee (TMOC) -

14、 formerly T1M1 -develops operations, administration, maintenance and provisioning standards, and other documentation related to Operations Support System (OSS) and Network Element (NE) functions and interfaces for communications networks - with an emphasis on standards development related to U.S.A.

15、communication networks in coordination with the development of international standards. Suggestions for improvement of this document are welcome. They should be sent to the Alliance for Telecommunications Industry Solutions,TMOC Secretariat, 1200 G Street NW, Suite 500, Washington, DC 20005. COMMON

16、LANGUAGE is a registered trademark and CLEI is a trademark of Telcordia Technologies, Inc. ATIS-0300007.2007 iii At the time it approved this document, TMOC, which is responsible for the development of this Standard, had the following members: M. Fargano, TMOC Chair R. Roman, TMOC Vice Chair C. Unde

17、rkoffler, ATIS Chief Editor Organization Represented Name of Representative Alcatal USA Inc. Ken Biholar Atahan Tuzel (Alt) AMDOCS Amit Kleinmann Tal Givoly (Alt) AT attribute group and attribute labels are not underlined. Object class references are placed in frames, written in blue italics and und

18、erlined, dark blue for references already defined in Rec. M.1401, and light blue for references introduced in this document. The formalism used in this document is a modification of the formalism introduced in Appendix III of Recommendation M.1401 and further explained in Annex B of this document. A

19、TIS-0300007.2007 3 6 APPLICATION SCHEMA Figure 1 - Application schema graph, depicting object classes (boxes), containment (reversed arrowheads), and references (two-way arrows) ATIS-0300007.2007 4 Cable facility Cable facility is defined in ATIS-0300097.2008 as “a facility that consists of a bound

20、or sheathed group of individually insulated optical or electrical conductors.” The Cable facility object class is introduced so that it can be referenced for use as a Physical link, Physical branch, Physical series, and Physical leg Identifier. Cable facility is not an M.1401 or PNR object class. AT

21、IS-0300097.2008 identifies a Cable facility by an attribute group according to the Cable Facility Format. “This format shall consist of a sequence of Facility Designation Code, Location A Code, and Location Z Code data units, resulting in a code that totals 27 characters.” Cable Facility Format Faci

22、lity designation code As defined for Carrier Facility Format. Location A Code As defined for Carrier Facility Format. Location Z Code As defined for Carrier Facility Format. Cable facility reference A Cable facility reference is a role of a subordinate Cable facility that identifies the superior Cab

23、le facility to which it belongs. Locations A and Z code A role of the Node relationship Identifier that is used as a reference for the Location A Code and Location Z Code of the ATIS-0300097.2008 Cable Facility Format and Cable Facility with Pair Identification Format. Cable facility pair Cable faci

24、lity pair is defined in ATIS-0300097.2008 as “two metallic conductors used to form a transmission path within a Cable facility.” The Cable facility pair object class is introduced so that it can be referenced for use as a Physical link connection, Branch connection, Series connection, and Leg connec

25、tion Identifier. A Cable facility pair can also be referred to for the routing of a Circuit or Special services circuit via Connecting Facility Assignment (CFA). In addition, Cable facility pair can be referenced for use as Trail multiplex channel Number. Cable facility is not an M.1401 or PNR objec

26、t class. ATIS-0300097.2008 identifies a Cable facility pair by an attribute group according to the Cable Facility with Pair Identification Format. “This format shall consist of a sequence of Facility Designation Code, Channel/Pair/Time Slot Code, Location A Code and Location Z Code data units, resul

27、ting in a code that totals 32 characters.” ATIS-0300007.2007 5 Cable Facility with Pair Identification Format Facility designation code As defined for Carrier Facility Format. Location A Code As defined for Carrier Facility Format. Location Z Code As defined for Carrier Facility Format. Channel/Pair

28、/Time Slot Code As defined for Carrier Facility with Channel/Time Slot Identification Format. Cable facility pair reference A Cable facility pair reference is a role of a subordinate Cable facility pair that identifies the superior Cable facility pair to which it belongs. Carrier facility As defined

29、 in ATIS-0300097.2008, “a transmission facility that provides several telecommunications channels over a single bidirectional path. A carrier facility generally consists of multiplex equipment at two terminal locations and an interconnection path consisting of: (1) a higher level facility system; (2

30、) a facility assembly; or (3) combinations of carrier facility systems and facility assemblies,” where facility is defined as “a physical or derived telecommunications path between two locations, which can be intraoffice as well as interoffice. A facility is bounded by its transmission signal input

31、to its equivalent transmission signal output, or its point of termination at another operating or interconnecting telephone company. A facility has the same capacity at each end and normally carries assignable channels, pairs, or time slots.” Facility assembly is defined as “a group of interconnecte

32、d equipment and transmission media uniquely identified and dedicated to a specific type of service.” The Carrier facility object class is introduced so that it can be referenced for use as Trail Local identifier. Carrier facility is not an M.1401 or PNR object class. ATIS-0300097.2008 identifies a C

33、arrier facility by an attribute group according to the Carrier Facility Format. “This format shall consist of a sequence of Facility Designation Code, Facility Type Code, Location A Code and Location Z Code data units, resulting in a code that totals 33 characters.” Carrier Facility Format Facility

34、designation code As defined in ATIS-0300097.2008, “a code that, for a specific type of facility, uniquely identifies a path between two network nodes. This data element shall consist of one to five characters, each of which may be alphabetic or numeric.” ATIS-0300007.2007 6 Facility type code As def

35、ined in ATIS-0300097.2008, “a code that describes the type of facility when it is other than a single baseband channel on cable. (Identification of cable facilities does not require the use of this code.) This data element shall consist of one to six characters, each of which may be alphabetic or nu

36、meric.” Location A Code As defined in ATIS-0300097.2008, “a standardized code that uniquely identifies the location of a facility terminal (i.e., lower in alphabetic sequence of the two facility terminal location codes), which is the telecommunications service company site at which equipment or pers

37、onnel are located, the function of equipment or personnel at the site, or a customers presence at a location at which network elements or network systems equipment exists. This data composite shall consist of either eight or eleven characters, as allowed by the requirements of ATIS-0300253.2005.” Lo

38、cation Z Code As defined in ATIS-0300097.2008, “a standardized code that uniquely identifies the location of a facility terminal (i.e., higher in alphabetic sequence of the two facility terminal location codes), for which the description is equivalent to that of Location A Code.” Locations A and Z c

39、ode A role of the Node relationship Identifier that is used as a reference for the Location A Code and Location Z Code of the ATIS-0300097.2008 Carrier Facility Format and Carrier Facility with Channel/Time Slot Identification Format. Carrier facility ch/timeslot Channel is defined in ATIS-0300097.2

40、008 as “a unit is assignable inventory within a carrier facility system. Channels may sometimes be referred to as assignment slots.” Timeslot is defined as “a cyclic time period that can be recognized and uniquely defined.” The Carrier facility ch/timeslot object class is introduced so that it can b

41、e referenced for use as Trail multiplex channel Number. A Carrier facility ch/timeslot can also be referred to for the routing of a Circuit or Special services circuit or another Carrier facility ch/timeslot via Connecting Facility Assignment (CFA). Carrier facility ch/timeslot is not an M.1401 or P

42、NR object class. ATIS-0300097.2008 identifies a Carrier facility channel timeslot by an attribute group according to the Carrier Facility with Channel/Time Slot Identification Format. “This format shall consist of a sequence of Facility Designation Code, Facility Type Code, Channel/Pair/Time Slot Co

43、de, Location A Code, and Location Z Code data units, resulting in a code that totals 38 characters.” Carrier Facility with Channel/Time Slot Identification Format Facility designation code ATIS-0300007.2007 7 As defined for Carrier Facility Format. Facility type code As defined for Carrier Facility

44、Format. Location A Code As defined for Carrier Facility Format. Location Z Code As defined for Carrier Facility Format. Channel/Pair/Time Slot Code As defined in ATIS-0300097.2008, “a standardized code that identifies a specific assignable portion of a facility. (This data element is not used when i

45、dentifying the entire facility.) This data element shall consist of one to five characters, each of which may be alphabetic or numeric. For open wire this field is used to identify the associated crossarm pin numbers by using a virgule (i.e., /) to separate the numbers.” Connecting facility assignme

46、nt A Connecting facility assignment is a role of a subordinate Carrier facility ch/timeslot that identifies the superior Carrier facility ch/timeslot on which it is routed (i.e., in ATIS terminology ”the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical

47、Network facility”). Circuit Circuit, in terms of Rec. M.1400 is a telephone-type circuit that utilizes capacity of a Carrier facility ch/timeslot or Cable facility pair on which it is routed. A telephone-type circuit is identified according to the ATIS-0300097.2008 Message Trunk Format. Message trun

48、ks are shared transmission paths between Cross-coupling sites that are designed for specific types of traffic in the public switched telephone network (PSTN). The Circuit object class is introduced so that it can be referenced for use as Trail Local identifier. In addition, Circuit Message Trunk For

49、mat can be referenced for use as Trail multiplex channel Number. Circuit is not an M.1401 or PNR object class. ATIS-0300097.2008 identifies a Circuit by an attribute group according to the Message Trunk Format. “This format shall consist of a sequence of Trunk Number, Traffic Class Code, Office Class Code, Traffic Use Code, Trunk-Type Modifier Code, Location A Code, Address Signaling Code, and Location Z Code data units, resulting in a code that totals a maximum of 41 characters. Trunk N