ASTM F2923-2014 Standard Specification for Consumer Product Safety for Children&rsquo s Jewelry《儿童饰品的消费者产品安全的标准规格》.pdf
《ASTM F2923-2014 Standard Specification for Consumer Product Safety for Children&rsquo s Jewelry《儿童饰品的消费者产品安全的标准规格》.pdf》由会员分享,可在线阅读,更多相关《ASTM F2923-2014 Standard Specification for Consumer Product Safety for Children&rsquo s Jewelry《儿童饰品的消费者产品安全的标准规格》.pdf(19页珍藏版)》请在麦多课文档分享上搜索。
1、Designation: F2923 11F2923 14Standard Specification forConsumer Product Safety for Childrens Jewelry1This standard is issued under the fixed designation F2923; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revisi
2、on. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThe purpose of this consumer safety specification is to establish nationally recognized safetyrequirements and test methods for c
3、hildrens jewelry.1. Scope1.1 This specification establishes requirements and test methods for specified elements and certain mechanical hazards inchildrens jewelry. It also includes recommendations for age labeling and warnings, and guidelines on identifying the primaryintended users (children or ad
4、ults). It does not purport to cover every conceivable hazard of childrens jewelry. It does not coverproduct performance or quality, except as related to safety. This specification has no requirements for those aspects of childrensjewelry that present an inherent and recognized hazard as part of the
5、function of jewelry, such as small parts. This specificationestablishes requirements recognizing that not all jewelry is appropriate for all age groups. Jewelry is not recommended for youngchildren 3 and under absent close parental supervision.1.2 This specification applies only to jewelry, as defin
6、ed in 3.2.1, which is designed or intended primarily for children 12 andunder,years of age and younger, as defined in 3.2.2. Childrens jewelry is a product principally designed and intended as anornament worn by a child. This includes a product or a component of the product intended to be removed an
7、d worn by a childas an item of ornamentation (that is, a shoe charm that can be placed on a bracelet). Adult jewelry, which is defined as jewelrydesigned and intended for use primarily by those over age 12, is covered by another ASTM standard, Consumer SafetySpecification F2999.1.3 This specificatio
8、n does not apply to the following:1.3.1 Toy jewelry or any other products that are intended for use by a child when the child plays (that is, a necklace worn bya doll or stuffed animal; novelty jewelry with play value);21.3.2 Accessories (that is, Handbags, Belts);1.3.3 Apparel (except as described
9、in 3.2.1(p);1.3.4 Footwear (except as described in 3.2.1(p);1.3.5 Any other item whose primary purpose is functional (that is, keys, key chains, or other items not primarily intended tobe worn as a personal item of ornamentation).1.4 This consumer safety specification includes the following sections
10、:Title SectionScope 1Referenced Documents 2Definitions 3Age-Labeling 4Specifications for Lead in Childrens Jewelry 5Specifications for Childrens Body-Piercing Jewelry 7Specifications for Antimony, Arsenic, Barium,Cadmium, Chromium, Mercury andSelenium in Paint and Surface Coatingsof Childrens Jewelr
11、y8Specifications for Cadmium in Substrate Materialsof Childrens Jewelry91 This specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.24 on Jewelry.Current edition approved Nov. 1, 2011Oct. 1, 2014. Published November 2
12、011November 2014. Originally approved in 2011. Last previous edition approved in 2011 asF2923 11. DOI: 10.1520/D2393-11.10.1520/D2393-14.2 Any product which is predominately used for play value is a toy. Toys are subject to the requirements of Consumer Safety Specification F963.-11.This document is
13、not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropri
14、ate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1Specification for Nickel in Metal Componentsof Childrens Jewelry1
15、0Specifications for Liquid-Filled Childrens Jewelry 11Mechanical Requirements for Childrens Jewelry 12Test Methods 13Annexes Annex A1Annex A2Rationales Appendix X11.5 The following precautionary statement pertains only to the test methods portion of this specification. This standard does notpurport
16、to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard toestablish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:3E1613 Te
17、st Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES),FlameAtomicAbsorption Spectrometry (FAAS), or Graphite FurnaceAtomicAbsorption Spectrometry (GFAAS) TechniquesF963F963-11 Consumer Safety Specification for Toy SafetyF2999 Consumer Safety Specifi
18、cation for Adult Jewelry2.2 CPSC Standards:4CPSC-CH-E1003-09 Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings,April 26, 2009CPSC-CH-E1002-08 Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Childrens Products,February 1, 2009
19、CPSC-CH-E1001-08 Standard Operating Procedure for Determining Total Lead (Pb) in Childrens Metal Products (IncludingChildrens Metal Jewelry)CPSC-CH-E1004-11 Standard Operating Procedure for Determining Cadmium (Cd) Extractability from Childrens MetalJewelry2.3 BS Standard:European Standards:5CR 1247
20、1: 2002 Screening test for nickel release from alloys and coatings in items that come into direct and prolonged contactwith the skinBS EN 18111811: 2011 :2011; EN 12472Reference test method for release of nickel from all post assemblies which are insertedinto pierced parts of the human body and arti
21、cles intended to come into direct and prolonged contact with the skinBS EN 71-312472: 2009 :1995 Safety of toys. Specification for migration of certain elementsMethod for the simulation of wearand corrosion for the detection of nickel release from coated items2.4 CFR Standard:16 CFR 1500.4 Human exp
22、erience with hazardous substances. substances16 CFR 1500.14 Products requiring special labeling under section 3(b) of the act.act16 CFR 1500.48 Technical requirements for determining a sharp point in toys and other articles intended for use by childrenunder 8 years of age.age16 CFR 1500.49 Technical
23、 requirements for determining a sharp metal or glass edge in toys and other articles intended for useby children under 8 years of age16 CFR 1500.50-53 Test methods for simulating use and abuse of toys and other articles intended for use by children.children16 CFR 1500.91 Determinations regarding lea
24、d content for certain materials or products under section 101 of the ConsumerProduct Safety Improvement Act.Act16 CFR 1500.231 Guidance for hazardous liquid chemicals in childrens products. products16 CFR 1501.3 Exemptions.Exemptions16 CFR 1501.4 Size requirements and test procedure.procedure3. Term
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASTMF29232014STANDARDSPECIFICATIONFORCONSUMERPRODUCTSAFETYFORCHILDRENRSQUOSJEWELRY 儿童 饰品 消费者 产品 安全 标准

链接地址:http://www.mydoc123.com/p-539742.html