ASTM F1553-2011(2017) Standard Guide for Specifying Chain Link Fence《指定铁丝网围栏的标准指南》.pdf

《ASTM F1553-2011(2017) Standard Guide for Specifying Chain Link Fence《指定铁丝网围栏的标准指南》.pdf》由会员分享，可在线阅读，更多相关《ASTM F1553-2011(2017) Standard Guide for Specifying Chain Link Fence《指定铁丝网围栏的标准指南》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F1553 11 (Reapproved 2017)Standard Guide forSpecifying Chain Link Fence1This standard is issued under the fixed designation F1553; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in

2、parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide covers the recommended criteria for speci-fying the various elements of a chain link fence and lists theavailable choices of component

3、s from the current ASTMstandards.1.2 No recommendation is made or implied concerning themerits of any particular product. The choice of productcomponents of the chain link fence should be made by thewriters of the project specification, based on their own percep-tion of the merits of the products fo

4、r the particular application.1.3 The values stated in inch-pound units are to be regardedas standard. The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.4 This standard does not purport to address all of the

5、safety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.1.5 This international standard was developed in accor-dance with inter

6、nationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.2. Referenced Documents2.1 ASTM Standards:2A121

7、Specification for Metallic-Coated Carbon SteelBarbed WireA392 Specification for Zinc-Coated Steel Chain-Link FenceFabricA491 Specification for Aluminum-Coated Steel Chain-LinkFence FabricA824 Specification for Metallic-Coated Steel MarcelledTension Wire for Use With Chain Link FenceF552 Terminology

8、Relating to Chain Link FencingF567 Practice for Installation of Chain-Link FenceF626 Specification for Fence FittingsF668 Specification for Polyvinyl Chloride (PVC), Polyolefinand Other Polymer-Coated Steel Chain Link Fence FabricF900 Specification for Industrial and Commercial SteelSwing GatesF934

9、Specification for Colors for Polymer-Coated ChainLink Fence MaterialsF969 Practice for Construction of Chain-Link Tennis CourtFenceF1043 Specification for Strength and Protective Coatings onSteel Industrial Fence FrameworkF1083 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welde

10、d, for Fence StructuresF1183 Specification for Aluminum Alloy Chain Link FenceFabricF1184 Specification for Industrial and Commercial Horizon-tal Slide GatesF1345 Specification for Zinc-5 % Aluminum-MischmetalAlloy-Coated Steel Chain-Link Fence FabricF1379 Terminology Relating to Barbed TapeF1664 Sp

11、ecification for Poly(Vinyl Chloride) (PVC) andOther Conforming Organic Polymer-Coated Steel TensionWire Used with Chain-Link FenceF1665 Specification for Poly(Vinyl Chloride) (PVC) andOther Conforming Organic Polymer-Coated Steel BarbedWire Used With Chain-Link FenceF1712 Specification for Steel Cha

12、in-Link Fencing MaterialsUsed for High Security Applications (Withdrawn 2015)3F1910 Specification for Long Barbed Tape ObstaclesF1911 Practice for Installation of Barbed TapeF2000 Guide for Fences for Baseball and Softball FieldsF2049 Safety Performance Specification for Fences/Barriersfor Public, C

13、ommercial, and Multi-Family ResidentialUse Outdoor Play AreasF2200 Specification for Automated Vehicular Gate Con-struction1This guide is under the jurisdiction of ASTM Committee F14 on Fences and isthe direct responsibility of Subcommittee F14.40 on Chain Link Fence and WireAccessories.Current edit

14、ion approved June 1, 2017. Published July 2017. Originally approvedin 1994. Last previous edition approved in 2011 as F1553 - 11. DOI: 10.1520/F1553-11R17.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTM

15、Standards volume information, refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis inte

16、rnational standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Co

17、mmittee.1F2611 Guide for Design and Construction of Chain LinkSecurity Fencing2.2 CSI Standard:Master Format Chain Link Fence 32 31 1342.3 Chain Link Fence Manufacturers Institute:WLG 2445 Chain Link Fence Wind Load Guide for theSelection of Line Post and Line Post Spacing53. Terminology3.1 Definiti

18、onsSee Terminology F552 for definitions ofterms relating to chain link fencing. See Terminology F1379for definitions of terms relating to barbed tape.4. Summary of Practice4.1 Many standard specifications for chain link fence arepresently in existence. These include, but are not limited to,specifica

19、tions of the federal, state, and municipal governmentsand their various agencies, as well as trade groups andorganizations. Most of these specifications either referenceexisting ASTM standards or are duplications of some of thesestandards. This guide references chain link fence ASTMstandards for the

20、 purpose of developing a complete chain linkfence specification.4.2 A large percentage of construction specifiers useMasterFormat, developed and published by the ConstructionSpecifications Institute (CSI) for writing project specifications.Chain link fence carries the MasterFormat designation 32 311

21、3. The standard format for each MasterFormat section is inthree parts: Part 1General; Part 2Products; and Part3Execution. This guide is written in a manner that will lenditself to following that format.5. Part 1General5.1 List the work included, related work, erectorqualification, referenced documen

22、ts, criteria for shop drawings,and product data submittals, when required.6. Part 2Products6.1 Acceptable ManufacturersWhen desired, list the ac-ceptable manufacturers of any components of the chain linkfence.6.2 Materials:6.2.1 Chain Link FabricSelect the material and type ofcoating from one of the

23、 following:6.2.1.1 Zinc-Coated Steel In Accordance With SpecificationA392Select Class 1 or Class 2 coating.6.2.1.2 Aluminum-Coated Steel In Accordance With Speci-fication A4916.2.1.3 Zinc-5 % Aluminum-Mischmetal (Zn-5Al-MM)Alloy-Coated Steel In Accordance With SpecificationF1345If Zn-5Al-MM alloy-co

24、ated steel, select Class 1 orClass 2 coating.6.2.1.4 Aluminum Alloy In Accordance With SpecificationF1183.6.2.1.5 Polymer-Coated Steel In Accordance With Specifi-cation F668(1) If polymer-coated steel, select Class 1, Class 2a, orClass 2b coating.(2) If polymer-coated steel, select the color from Sp

25、ecifi-cation F934.6.2.2 Fence Posts, Rails, and Braces:6.2.2.1 Select the framework from Specifications F1043,ifGroup IA is chosen, see F1083.6.2.2.2 Select the protective coating from SpecificationF1043.6.2.2.3 If optional supplemental color coated polymercoated steel, select polymer coating in acc

26、ordance with Speci-fication F1043.6.2.3 Barbed WireIf barbed wire is desired, select thedesign number and type of coating from one of the following:6.2.3.1 If metallic-coated steel in accordance with Specifi-cation A121, select Design Number 12-4-3-14R or 12-4-5-14Rand coating Type A (aluminum coate

27、d steel), Z (Class 3zinc-coated steel) or ZA (Class 60 zinc-5 % aluminum-mischmetal alloy coated steel).6.2.3.2 If PVC or other polymer-coated steel, select CoatingClass 1, Class 2a or Class 2b in accordance with SpecificationF1664, and select color in accordance with Specification F934.6.2.4 Barbed

28、 Tape ObstaclesSelect in accordance with theproduct descriptions in Specification F1910.6.2.5 Tension WireSelect the type of coating from one ofthe following:6.2.5.1 If metallic coated steel in accordance with Specifi-cation A824, select coating Type I (aluminum coated steel),Type II (zinc-coated st

29、eel) or Type III (zinc-5 %-aluminum-mischmetal alloy coated steel).(1) For Type II, select coating Class 1, Class 2, or Class 3;(2) For Type III, select coating Class 1 or Class 2.6.2.5.2 If PVC or other polymer coated steel, select corewire diameter, type of metallic coating, and Coating Class 1,Cl

30、ass 2a or Class 2b in accordance with Specification F1665and select color in accordance with Specification F934.6.2.6 FittingsSpecify fittings are to be in accordance withSpecification F626, and list any choices, additions, or excep-tions to that specification. In general, the type of material andan

31、y protective coating selected for the fittings should matchthat selected for the fence posts, rails and braces (see 6.2.2).6.2.7 Swing GatesSpecify swing gates are to be in accor-dance with Specification F900. Select single or double gates. Ifautomated, add requirement to comply with F2200.6.2.8 Sli

32、de GatesSpecify slide gates are to be in accor-dance with Specification F1184, and select Type I, overheadslide, or Type II, cantilever slide. Select single or double gates.If automated, add requirement to comply with F2200.6.2.8.1 If Type II, cantilever slide, select Class 1 or Class 2.6.3 Componen

33、ts and Sizes:6.3.1 Chain Link FabricSelect the size of mesh, size ofwire, height of fabric, type of top selvage, and type of bottomselvage from Specifications A392, A491, F668, F1183,orF1345.4Available from Construction Specifications Institute, 601 Madison St.,Alexandria, VA 22314-1791.5Available f

34、rom Chain Link Fence Manufacturers Institute, 10015 Old ColumbiaRoad, Suite B-215, Columbia, MD 21046, http:/www.chainlinkinfo.org.F1553 11 (2017)2NOTE 1If the fence is for a tennis court use Practice F969.6.3.2 Line PostsSelect the size from Specification F1043,if Group IA is chosen, see Specificat

35、ion F1083.6.3.3 Corner and Terminal PostsSelect the size fromSpecifications F1043, if Group IA is chosen, see SpecificationF1083.NOTE 2If slats, screening or other materials are to be installed in oron the chain link fabric, or the use of small security mesh or if the fenceis 10 ft (3.05 m) high or

36、greater, consideration should be given to selectionof larger size line, corner and terminal posts, increasing the size of the postfootings, decreasing the spacing of the line posts, decreasing the spacingof the tie wires or other fasteners securing the fabric to the framework, orvarious combinations

37、 of these measures, to withstand the additional wind,and snow or ice load placed on the fence. Consult the Chain Link FenceManufacturers Institute Guide WLG 2445.6.3.4 Swing Gate PostsSpecify the size of swing gateposts to be in accordance with Specification F900, Table 2.6.3.5 Slide Gate PostsSpeci

38、fy the size of slide gate poststo be in accordance with Specification F1184.6.3.6 Horizontal Framework MembersMaterials may beeither pipe or roll-formed sections (referred to as rails), ortension wire. Select material and type of coating as follows:6.3.6.1 Determine if the top horizontal member of t

39、he fencewill be a rail or tension wire. If rail, select from SpecificationF1043. If tension wire, see 6.2.5.NOTE 3All fences should have either a top rail or top tension wire.6.3.6.2 Determine if the fence is to have a mid-height(intermediate) rail. Select from Specification F1043.NOTE 4Tension wire

40、 is not used as an intermediate horizontalmember. An intermediate rail should always be specified on 12 ft (3.7 m)high fence in accordance with Practice F567. Fences greater than 14 ft (4.3m) in height may require two or more intermediate rails, spaced at equalintervals between finished grade and th

41、e top of the fence. Intermediaterails may be specified on fences less than 12 ft (3.7 m) in height whenconditions warrant.6.3.6.3 Determine if the fence is to have a bottom horizontalmember. If rail, select from Specification F1043. If tensionwire, see 6.2.5.NOTE 5A bottom rail or bottom tension wir

42、e is optional butrecommended for better security. A bottom horizontal member should bespecified on any fence constructed with slats or screening.6.3.6.4 Specify brace rails and truss rod assemblies forfences greater than 5 ft (1.5 m) in height (see Practice F567).Select brace rail material from Spec

43、ification F1043. Selecttruss rod material from Specification F626.6.3.7 Barbed WireIndicate the number of strands (three,five, or six) and the configuration of barbed wire. If threestrands, indicate whether the barbed wire is to be slantedinward or outward from the fence line or in a vertical planea

44、bove the fence.6.3.8 GatesIndicate the size (opening width) of all gates.6.3.9 If the fence is for a high security, detention orcorrectional facility, see Specification F1712 or F2611forspecial provisions on materials and installation, some of whichmay supersede various provisions specified herein.7

45、. Part 3Execution7.1 Installation:7.1.1 Specify the fence is to be installed per Practice F567,and list any choices, additions, or exemptions to that practice.7.1.2 If the fence is for a tennis court, use Practice F969.7.1.3 Specify that any manufacturers instructions for theinstallation of gate sys

46、tems are to be followed.7.1.4 If the fence is for higher security, a detention orcorrectional facility, specify that special provisions containedin Practice F1712 or Practice F2611 are to be followed.7.1.5 If the fence is to include barbed tape obstacle, specifythat the requirements of Practice F191

47、1 are to be followed.7.1.6 If the fence is for a ballfield or other sports facility,specify that special provisions contained in Guide F2000 are tobe followed.7.1.7 If the fence is for a public, commercial or multi-familyresidential use outdoor play area, specify that any specialprovisions for the i

48、nstallation listed in Guide F2049 are to befollowed.8. Keywords8.1 chain link; fence; specificationsASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that dete

49、rmination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committ