ASTM E2738-2011 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods《计算机X线摄影(CR)试验方法(DICONDE)用无损评估.pdf

《ASTM E2738-2011 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods《计算机X线摄影(CR)试验方法(DICONDE)用无损评估.pdf》由会员分享，可在线阅读，更多相关《ASTM E2738-2011 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods《计算机X线摄影(CR)试验方法(DICONDE)用无损评估.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2738 11Standard Practice forDigital Imaging and Communication NondestructiveEvaluation (DICONDE) for Computed Radiography (CR) TestMethods1This standard is issued under the fixed designation E2738; the number immediately following the designation indicates the year oforiginal adoption

2、or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This practice facilitates the interoperability of computedradiography (CR) i

3、maging and data acquisition equipment byspecifying image data transfer and archival storage methods incommonly accepted terms. This practice is intended to be usedin conjunction with Practice E2339 on Digital Imaging andCommunication in Nondestructive Evaluation (DICONDE).Practice E2339 defines an i

4、ndustrial adaptation of the NEMAStandards Publication titled Digital Imaging and Communica-tions in Medicine (DICOM, see http:/medical.nema.org), aninternational standard for image data acquisition, review,storage and archival storage. The goal of Practice E2339,commonly referred to as DICONDE, is t

5、o provide a standardthat facilitates the display and analysis of NDE results on anysystem conforming to the DICONDE standard. Toward thatend, Practice E2339 provides a data dictionary and a set ofinformation modules that are applicable to all NDE modalities.This practice supplements Practice E2339 b

6、y providing infor-mation object definitions, information modules and a datadictionary that are specific to computed radiography testmethods.1.2 This practice has been developed to overcome the issuesthat arise when analyzing or archiving data from CR testequipment using proprietary data transfer and

7、 storage methods.As digital technologies evolve, data must remain decipherablethrough the use of open, industry-wide methods for datatransfer and archival storage. This practice defines a methodwhere all standard CR technique parameters and test results arecommunicated and stored in a standard manne

8、r regardless ofchanges in digital technology.1.3 This practice does not specify:1.3.1 A testing or validation procedure to assess an imple-mentations conformance to the standard.1.3.2 The implementation details of any features of thestandard on a device claiming conformance.1.3.3 The overall set of

9、features and functions to be ex-pected from a system implemented by integrating a group ofdevices each claiming DICONDE conformance.1.4 Although this practice contains no values that requireunits, it does describe methods to store and communicate datathat do require units to be properly interpreted.

10、 The SI unitsrequired by this practice are to be regarded as standard. Noother units of measurement are included in this practice.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establis

11、h appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2E1316 Terminology for Nondestructive ExaminationsE1475 Guide for Data Fields for Computerized Transfer ofDigital Radiological Examination Data

12、E2339 Practice for Digital Imaging and Communication inNondestructive Evaluation (DICONDE)2.2 Other Documentation:National Electrical Manufacturers Association Standard forDigital Imaging and Communication in Medicine (DI-COM), 2011.3. Terminology3.1 Definitions:3.1.1 Nondestructive evaluation terms

13、 used in this practicecan be found in Terminology E1316.3.1.2 DICONDE terms used in this practice are defined inPractice E2339.4. Summary of Practice4.1 A fundamental principle of DICONDE is the use ofstandard definitions and attribute formats for data communica-tion and storage. This means all syst

14、ems that are DICONDE1This practice is under the jurisdiction of ASTM Committee E07 on Nonde-structive Testing and is the direct responsibility of Subcommittee E07.11 on DigitalImaging and Communication in Nondestructive Evaluation (DICONDE).Current edition approved Dec. 1, 2011. Published January 20

15、12. Originallyapproved in 2010. Last previous edition approved in 2010 as E2738 - 10. DOI:10.1520/E2738-11.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the stand

16、ards Document Summary page onthe ASTM website.1*A Summary of Changes section appears at the end of this standard.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United Spliant use a common data dictionary and common com-munication protocols. To fur

17、ther standardization, the elementsin the data dictionary are organized into common groupsreferred to as information modules. The data dictionary andinformation modules common to all NDE modalities aredefined in Practice E2339.4.2 The data dictionary and information modules specifiedin Practice E2339

18、 do not cover the information storagerequirements for each individual modality (CT, DR, CR, UT,etc.). Additions to the data dictionary and information modulesare required to support the individual modalities. This practicecontains the additions to the DICONDE data dictionary andinformation modules n

19、ecessary for CR inspection.4.3 The highest organizational level in the DICONDEinformation model is the information object definition (IOD).An information object definition is a collection of the infor-mation modules necessary to represent a set of test results froma specific modality. This practice

20、contains information objectdefinitions for CR inspection.5. Significance and Use5.1 Personnel that are responsible for the creation, transfer,and storage of computed radiography NDE data will use thispractice. This practice will define a set of information modulesthat along with the Practice E2339 a

21、nd the DICOM standardwill provide a standard means to organize CR inspection data.The CR inspection data may be displayed and analyzed on anydevice that conforms to the standard. Personnel wishing toview any CR inspection data stored in accordance with PracticeE2339 may use this practice to help the

22、m decode and displaythe data contained in the DICONDE compliant inspectionrecord.6. Information Object Definitions6.1 NDE Computed Radiography Image IOD Description:6.1.1 The NDE Computed Radiography (CR) Image Infor-mation Object Definition specifies an image that has beencreated by a computed radi

23、ography imaging device for NDEpurposes. The IOD definition will follow that for CR Imagesfound in Part 3, Section A.2 of the DICOM standard except asnoted in Table 1. Table 1 is not stand-alone and must be usedin conjunction with Part 3, Section A.2 of the DICOM standardto have a complete definition

24、 of the NDE CR informationobject.6.1.2 This IOD will use the Service-Object Pair (SOP) classfor the CR IOD as defined in Part 4, Section B.5 of the DICOMstandard.7. Information Modules7.1 NDE CR Series Module:7.1.1 Table 2 specifies the attributes that describe NDEComputed Radiography images.8. Keyw

25、ords8.1 Computed Radiography; CR; database; DICOM; DI-CONDE; digital data storage; digital data transmission; fileformatTABLE 1 NDE CR Image Information Object DefinitionDICOM Module DICONDE Module Reference UsagePatient Component E2339, Section 7 MClinical Trial Subject Not ApplicableGeneral Study

26、Component Study E2339, Section 7 MPatient Study Not ApplicableClinical Trial Study Not ApplicableGeneral Series Component Series E2339, Section 7 MCR Series NDE CR Series Section 7.1 MClinical Trial Series Not Applicable UGeneral Equipment NDE Equipment E2339, Section 7 MContrast/bolous Not Applicab

27、le UNDE Indication E2339, Section 7 UNDE Geometry E2339, Section 7 UE2738 112SUMMARY OF CHANGESCommittee E07 has identified the location of selected changes to this standard since the last issue (E2738 - 10)that may impact the use of this standard. (December 1, 2011)(1) Added required statement on s

28、afety.(2) Updated DICOM standard reference in 2.2.(3) Clarified DICOM standard reference for SOP Classes in6.1.1.(4) Updated for use of public tags for DICONDE attributes inTable 2.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item

29、mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical commit

30、tee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a mee

31、ting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive,

32、PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).

33、 Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).TABLE 2 NDE CR Series Module AttributesAttribute Name Tag VR VM Type DescriptionPart Examined (0018,0015) CS 1 2 Text description of the part examinedView Position (0018,5101) CS 1 2 Radi

34、ographic view. Defined Terms:FA = Forward/AftAF = Aft/ForwardLL = Left LateralRL = Right LateralRLD = Right Lateral DecubitusLLD = Left Lateral DecubitusFilter Type (0018,1160) SH 1 3 Label for the type of filter inserted into the x-ray beamCollimator/grid Name (0018,1180) SH 1 3 Label describing an

35、y grid inserted.Focal Spot (0018,1190) DS 1-n 3 Size of the focal spot in mm. For devices with variable focal spot ormultiple focal spots, small dimension followed by large dimension.Plate Type (0018,1260) SH 1 3 Label of the type of storage phosphor plates used in this seriesPhosphor Type (0018,1261) LO 1 3 Label of type of phosphor on the platesE2738 113