ASTM D1909-2013 Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers《纺织用纤维商业折让和商用吸湿性标准表格》.pdf

《ASTM D1909-2013 Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers《纺织用纤维商业折让和商用吸湿性标准表格》.pdf》由会员分享，可在线阅读，更多相关《ASTM D1909-2013 Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers《纺织用纤维商业折让和商用吸湿性标准表格》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: D1909 04 (Reapproved 2012)D1909 13StandardTableTables of Commercial Moisture Regains andCommercial Allowances for Textile Fibers1This standard is issued under the fixed designation D1909; the number immediately following the designation indicates the year oforiginal adoption or, in the

2、case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This table listsThese tables list the commercial moisture regains and commercial allowan

3、ces commonly used for a numberof textile fibers. Such moisture regain and allowance values are intended primarily for determining the commercial weight of aspecific fiber when the fiber is bought or sold on this basis. These regain and allowance values also are used in calculating the lineardensity

4、of yarn in procedures employing such factors and in the quantitative analysis of fiber blends.2. Referenced Documents2.1 ASTM Standards:2D123 Terminology Relating to TextilesD2118 Practice for Assigning a Standard Commercial Moisture Content for Wool and its ProductsD2494 Test Method for Commercial

5、Mass of a Shipment of Yarn or Manufactured Staple Fiber or TowD2720 Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various CommercialCompositionsD4920 Terminology Relating to Conditioning, Chemical, and Thermal Properties2.2 BISFA Standard:3BISFA Terminolo

6、gy of Man-made Fibers3. Terminology3.1 Definitions:3.1.1 commercial moisture regain (CMR), na formally adopted, arbitrary value, to be used with the oven-dried mass of textilefibers, when calculating the commercial mass of a shipment or delivery.3.1.1 For all terminology related to Conditioning and,

7、 Chemical and Thermal Properties, see Terminology D4920.3.1.1.1 The following terms are relevant to this standard: commercial moisture regain (CMR), commercial allowance (CA).3.1.2 For definitions of all other textile terms used, terms, refer to Terminology D123.4. Significance and Use4.1 The value

8、listed for the commercial moisture regain and commercial allowance of a specific fiber type is not anexperimentally determined quantity but a purely arbitrarydefined value arrived at for commercial purposes by interested parties.The actual moisture regain values of textile materials, when in moistur

9、e equilibrium with the standard atmosphere for testing, bearno consistent relation to the commercial moisture regain values listed herein.can deviate from the listed values. Equilibriummoisture regain values depend upon the previous history of the material. The actual finish content of textile mater

10、ials can deviatefrom the listed values (see Test Method D2494).5. Table of Commercial Moisture Regain Values5.1 Commercial moisture regain values for specified fibers are listed in Table 1.5.2 Commercial allowance values for specified fibers are listed in Table 2.1 This table isThese tables are unde

11、r the jurisdiction of ASTM Committee D13 on Textiles and isare the direct responsibility of Subcommittee D13.51 on Conditioningand, Chemical and Thermal Properties.Current edition approved Feb. 1, 2012Oct. 1, 2013. Published February 2012October 2013. Originally approved in 1961. Last previous editi

12、on approved in 2004 asD1909 04.D1909 04 (2012). DOI: 10.1520/D1909-04R12.10.1520/D1909-13.2 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer tot he standards Document summ

13、ary page on the ASTM website.3 International Bureau for the Standardization of Man-Made Fibres, Avenue E. Van Nieuwenhuyse 6, 1160 Brussels, www.bisfa.org.This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made t

14、o the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current versionof the standard as published by ASTM is to be considered the official document.Copyrig

15、ht ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States16. Keywords6.1 moisture regain; textile fiberTABLE 1 Commercial Moisture Regain ValuesFiber Regain, % Fiber Regain, %Acetate (secondary) 6.5 ModacrylicGAcrylic 1.5 Class I 0.4Aramid, for A Clas

16、s II 2.0High Modulus Yarn 3.5Standard Yarn 7.0Class III 3.0Nylon (polyamide) 4.5Olefin 0.0Azlon 10.0 Polyester 0.4Cotton RamieRaw cotton B Raw 7.6Natural cotton yarn 7.0C Scoured 7.8Dyed cotton yarn 8.0C Rayon (regenerated cellulose) 11.0Mercerized cotton yarn 8.5C Rubber 0.0Flax (raw) 12.0D Saran 0

17、.0Flax (linen) 8.75 Silk 11.0Fluorocarbon 0.0 Spandex 1.3Glass 0.0 Triacetate (primary) 3.5Hemp 12.0D Vinal 4.5Jute 13.75D Vinyon 0.0Metallic 0.0 Wool (all forms) 13.6E,FTABLE 1 Commercial Moisture Regain ValuesFiber CommericalMoistureRegain, %Fiber CommericalMoistureRegain, %Acetate (secondary) 6.5

18、 ModacrylicGAcrylic 1.5 Class I 0.4Aramid, for A Class II 2.0High Modulus Yarn 3.5 Class III 3.0Standard Yarn 7.0 Nylon (polyamide) 4.5Azlon 10.0 Olefin 0.0Cotton Polyester 0.4Raw cotton B RamieNatural cotton yarn 7.0C Raw 7.6Dyed cotton yarn 8.0C Scoured 7.8Mercerized cotton yarn 8.5C Rayon (regene

19、rated cellulose) 11.0Flax (raw) 12.0D Rubber 0.0Flax (linen) 8.75 Saran 0.0Fluorocarbon 0.0 Silk 11.0Glass 0.0 Spandex 1.3Hemp 12.0D Triacetate (primary) 3.5Jute 13.75D Vinal 4.5Metallic 0.0 Vinyon 0.0Wool (all forms) 13.6E,FA Aramid polymers are manufactured for specific but diverse end uses and ha

20、ve nominal regains that vary in the range 1.5 to 7.0 %. The values listed in the table are thecommercial regains of fibers currently produced.B There is no commercial regain value for raw cotton in U.S. trade. The value specified in Rule 15 of the Egyptian sales contracts and in Rule 105 of the Live

21、rpool salescontract for Egyptian and Syrian cotton is 8.5. The value 8.5 is also used customarily for the cotton component of blends containing cotton in the process of performingquantitative analysis.C Commercial Standard CS11-63, which is issued by the National Bureau of Standards, recommends thes

22、e values to be used for cotton yarns by dyers and finishers.D These values are the official commercial moisture regains listed in British Standards Handbook 11, Methods of Test for Textiles, Section 1, 1963.E Amoisture content of 12.0 %, which is equal to a moisture regain of 13.6 %, has been recomm

23、ended for all wool yarns in Practice D2118. However, certain other regainvalues are commonly used. Other values, which should perhaps be classified as commercial allowance values, are listed below for information only.Woolen yarn 13.0Woolen hand knitting yarn 11.1Worsted yarn (dry spun) 15.0Worsted

24、yarn (oil spun) 13.0Woolen yarn 13.0Woolen hand knitting yarn 11.1Worsted yarn (dry spun) 15.0Worsted yarn (oil spun) 13.0F For the commercial moisture contents of wools to which various specific commercial designations are applied, see Practice D2720.G Class III modacrylic fibers include such fiber

25、s as Verel modacrylic fiber. Class II includes such fibers as SEF modacrylic fiber. Class I modacrylic fibers includes allother modacrylic fibers.D1909 132ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard.

26、 Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed e

27、very five years andif not revised, either reapproved or withdrawn.Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible tech

28、nical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohoc

29、ken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photo

30、copy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).TABLE 2 Commercial Allowance ValuesAFiber CommericalAllowance, %Fiber CommericalAllowance, %Acetate 9.0 Lyocell 13.0Acrylic 2.0 MelamineAlginate 20.0 Metal 2.0Aramid, for Modacryl 2.0High Modulus Yarn 3.5 Modal 13.

31、0Standard Yarn 7.0 PolyamideCarbon FY 5.75Ceramic SF 6.25Chlorofiber 2.0 Polyester 1.5Cupro 13.0 Polyethylene 1.5Elastane 1.3 Polyimide 3.5Elastodiene 1.0 Polylactide 1.5Elastomultiester 1.5 Polypropylene 2.0Elastolefin 1.5 Triacetate 7.0Fluorofiber 0.0 Viscose 13.0Glass 2/3.0 Vinylal 5.0A BISFA, Terminology of man-made fibers, 2009 edition.D1909 133