ASME STP-PT-002-2005 ASME SECTION I PED GUIDE Supplement to Guide for ASME Stamp Holders Use of ASME Section I to Meet the EC Pressure Equipment Directive {97 23 EC)《符合EC压力设备指令 (97.pdf

《ASME STP-PT-002-2005 ASME SECTION I PED GUIDE Supplement to Guide for ASME Stamp Holders Use of ASME Section I to Meet the EC Pressure Equipment Directive {97 23 EC)《符合EC压力设备指令 (97.pdf》由会员分享，可在线阅读，更多相关《ASME STP-PT-002-2005 ASME SECTION I PED GUIDE Supplement to Guide for ASME Stamp Holders Use of ASME Section I to Meet the EC Pressure Equipment Directive {97 23 EC)《符合EC压力设备指令 (97.pdf（88页珍藏版）》请在麦多课文档分享上搜索。

1、 STP/PT-002 ASME SECTION I PED GUIDE Supplement to Guide for ASME Stamp Holders Use of ASME Section I to Meet the EC Pressure Equipment Directive 97/23/EC) -1SME STANDARDS TECHNOLOGY, LLC Date oflssuance: May 27,2005 This report was prepared as an account of work sponsored by the American Society of

2、 Mechanical Engineers Mechanical (ASME) and the ASME Standards Technology, LLC (ST-LLC). Neither ASME, ASME ST-LLC, nor others involved in the preparation or review of this report, nor any of their respective employees, members, or persons acting on their behalf, makes any warranty, express or impli

3、ed, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe upon privately owned rights. Reference herein to any specific commercial product, process, or

4、 service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the ASME ST-LLC or others involved in the preparation or review of this report, or any agency thereof. The views and opinions of the authors, contrib

5、utors, reviewers of the report expressed herein do not necessarily reflect those of the ASME ST-LLC or others involved in the preparation or review of this report, or any agency thereof. The ASME ST-LLC does not take any position with respect to the validity of any patent rights asserted in connecti

6、on with any items mentioned in this document, and does not undertake to insure anyone utilizing a bulletin against liability for infringement of any applicable Letters Patent, nor assumes any such liability. Users of a publication are expressly advised that determination of the validity of any such

7、patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this report or publication. ASME is the register

8、ed trademark of The American Society of Mechanical Engineers. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. ASME Standards Technology, LLC Three Park Avenue, New York, NY 10016-5990 ISBN

9、No. 0-7918-2991-X Copyright 2005 by ASME Standards Technology, LLC All Rights Reserved ASME Section I PED Guide STP/PT-002 TABLE OF CONTENTS FOREWORD . . . . v ABSTRACT . . vi PART I- UPDATE OF ISSUES ON USING THE ASME CODE TO MEET THE PED . 1 1. BACKGROUND . . . 2 2. USE OF NONHARMONIZED STANDARD .

10、 2 2.1 Material Specifications 2 2.2 Qualification ofNDE Personnel. . . . 3 2.3 Discussions with the European Commission 3 PART II - PED OVERVIEW 5 1. INTRODUCTION . 6 1.1 National Regulations . 6 1.2 Intent of PED . 6 1.3 Principles . 6 1.4 Types ofRequirements 6 2. GENERAL CONCEPTS . 7 2.1 Scope 7

11、 2.2 Hazard Categories . 8 2.3 Conformity Assessment Procedures 8 2.4 Notified Body 9 2.5 CE Marking . 9 2.6 Essential Safety Requirements 9 3. STRUCTURE OF PED 9 4. TRANSITIONAL PERIOD (ARTICLE 20) . 10 PART III- COMPARISON OF TECHNICAL REQUIREMENTS OF ASME SECTION I, WITH PED 97/23/EC, ANNEX I . 1

12、3 1. NOTES IN PART III ON ASME SECTION I REQUIREMENTS 42 2. NOTES IN PART III ON ADDITIONAL CONSIDERATIONS FOR ANNEX I ESSENTIAL SAFETY REQUIREMENTS: . 45 3. QUANTITATIVE REQUIREMENTS IN PED, ANNEX I TO BE APPLIED AS A GENERAL RULE . 53 PART IV- ANNEX ZA, ADDITIONAL CON SID ERA TIONS FOR APPLICATION

13、 OF SECTION I, POWER BOILERS WITHIN THE SCOPE OF PED 97/23/EC, ANNEX 1 . 55 REFERENCES . 79 ACKNOWLEDGMENTS 80 ABBREVIATIONS AND ACRONYMS . 81 iii STP/PT-002 ASME Section I PED Guide List of Tables Table 1 - Contents of the PED 11 Table 2- Safety Factors for Allowable Stresses Given in Annex I, 7.1.

14、2 53 Table 3- Joint Efficiencies Given in Annex I, 7.2 53 Table 4- Formula for Calculating Hydrostatic Test Pressure Given in Annex I, 7.4 . 53 List of Figures Figure 1 - Flowchart for PED (97 /23/CE) 12 iv ASME Section I PED Guide STP/PT-002 FOREWORD ASME has received requests from all over the wor

15、ld to provide guidance to manufacturers who have been or will be impacted by the European PED Reference!. The result was the publication of the “ASME Guide for ASME Stamp Holders on Using Section VIII, Division 1 to meet the EC Pressure Equipment Directive.“2 Now, this guide provides information to

16、manufacturers who want to use ASME Section I, Power Boilers to meet the PED. Established in 1880, the American Society of Mechanical Engineers (ASME) is a 120,000 member professional not-for-profit organization focused on technical, educational and research issues of the engineering and technology c

17、ommunity. ASME conducts one of the worlds largest technical publishing operations, holds numerous technical conferences worldwide, and offers hundreds of professional development courses each year. ASME maintains and distributes 600 Codes and Standards used around the world for the design, manufactu

18、ring and installation of mechanical devices. Visit www.asme.org for more information. The ASME Standards Technology, LLC (ASME ST-LLC) is a not-for-profit Limited Liability Company, with ASME as the sole member, formed in 2004 to carry out work related to newly commercialized technology, expanding u

19、pon the former role of ASMEs Codes and Standards Technology Institute (CSTI). The ASME ST -LLC mission includes meeting the needs of industry and government by providing new standards-related products and services, which advance the application of emerging and newly commercialized science and techno

20、logy and providing the research and technology development needed to establish and maintain the technical relevance of codes and standards. Visit www.stllc.asme.org for more information. v STP/PT-002 ASME Section I PED Guide ABSTRACT This guide is intended as a supplement for ASME stamp holders usin

21、g ASME Boiler and Pressure Vessel Code (BPVC) Section I 3as the basis for conformity with the European Commission (EC) Pressure Equipment Directive (PED), 97/23/ECl. This guide provides a comprehensive review of the PED and ASME Section I. Manufacturers of Section I boilers will find this supplement

22、, combined with the existing guide 2, to be useful tools when working with a Notified Body (NB) toward compliance with the PED and applying CE marking to their products. This supplement is intended to be used in combination with the existing guide2, which contains an explanation of the European New

23、Approach, and continues with the goals of the PED and a description of its scope of coverage. Then, the existing guide goes into an in-depth analysis of the PEDs concept of hazard categories and the various combinations of conformity assessment modules that can be used for each hazard category. Then

24、, each of the PED Essential Safety Requirements (ESR) are covered, including materials, use of notified bodies, and requirements for CE marking. Those aspects are not reproduced in this supplement, as they are generic to all pressure equipment under the PED. In this supplement, the reader is present

25、ed with some general guidance and updates on PED issues critical to ASME stamp holders. The majority of the supplement consists of a detailed comparison of the technical requirements of the PED with Section I, followed by a modified version of an “Annex ZA“ for Section I. This Annex ZA provides inst

26、ructions regarding what additional tasks must be completed to meet the administrative requirements of the PED. vi ASME Section I PED Guide PART I STP/PT-002 PART I-UPDATE OF ISSUES ON USING THE ASME CODE TO MEET THE PED 1 STP/PT-002 PART I ASME Section I PED Guide 1. BACKGROUND With the passing of t

27、he mandatory date for implementation of the PED, many questions that existed are beginning to be answered. CEN has managed to issue harmonized standards for most equipment, but there is little experience in using these standards, and the full suite of harmonized supporting standards remains incomple

28、te. During the transition period from November 29, 1999 through May 30, 2002, few harmonized standards were available, so all of the equipment that was CE marked during that period was built to nonharmonized standards. Therefore, manufacturers have gained more experience using nonharmonized standard

29、s to construct pressure equipment with CE marking, and the ASME Boiler and Pressure Vessel Code (ASME Code) is one of the most commonly used for PED compliance, both within Europe and around the world. There are some basic steps that will facilitate the use of the ASME Code to meet the PED. This doc

30、ument helps explain what those steps are specifically in regards to Section I of the ASME Boiler and Pressure Vessel Code 3, and the special considerations that must be given to assemblies. 2. USE OF NONHARMONIZED STANDARD When using a nonharmonized standard, many of the criteria for demonstrating c

31、ompliance with the essential safety requirements of the PED revolve around the concept of “equivalent overall level of safety.“ For that reason, it is valuable to select a notified body (NB) that is familiar with the requirements and design/fabrication philosophies of the ASME Code. There are severa

32、l ASME accredited Authorized Inspection Agencies that have established affiliations with European inspection bodies that are notified under the PED. These organizations bring knowledge of the ASME Code and the PED and can advise manufacturers as to what needs to be done in addition to ASME requireme

33、nts to meet the PED. This document will inform manufacturers of these additional requirements so they have more information to make a business decision as to whether to proceed to engage a NB in order to enter the European market. ASME has spent the last several years working on issues related to th

34、e use of its standards to meet the PED. Through meetings with NBs, the European Commission (EC), and also through workshops with users of ASME standards in the United States, Europe, and Asia, it became clear that some issues require changes, either in the ASME standards themselves, or how the proce

35、sses of the PED are used for their application. The following are some of the most recent developments in those important areas. 2.1 Material Specifications In May 2002, ASME was committed to working with manufacturers submitting proposals for European Approval of Materials (EAM) to the European Com

36、mission to gain approval of ASME material specifications for repeated use under the PED. ASME began a program of funding the necessary data collection and submittal in concert with a European NB and a U.S. manufacturer. Over one dozen of the most commonly used pressure equipment materials were submi

37、tted at a cost of $20,000 USD. Other notified bodies also submitted proposed EAMs covering ASME materials. However, the European Commission determined that Article 11, paragraph five of the PED prohibits the issuance of EAMs for grades of materials for which there exist an equivalent European harmon

38、ized standard. All of the submittals for EAMs for ASME materials were subsequently rejected. This means that the only method for using ASME materials under the PEDis the Particular Material Appraisal (PMA) route. ASME has spent the last two years working with notified bodies to bring some uniformity

39、 to the PMA process, which is not clearly defmed in the PED. The result has reduced the amount of redundancy of the process because it has been clarified that PMAs can be used repeatedly (by the same manufacturer using the same NB) for similar applications. There still remain some areas of uncertain

40、ty, the most recent being a guideline issued by the European Commission that 2 ASME Section I PED Guide PART I STP/PT-002 seems to imply that the material manufacturer must “guarantee“ the properties used by the equipment manufacturer in his design under the PED. This guideline, 7/24, is being inter

41、preted differently by different notified bodies and manufacturers should investigate this issue with potential notified bodies as part of the normal process for engaging the services of a NB prior to vessel construction. 2.2 Qualification of NDE Personnel The PED requires that qualification of Nonde

42、structive Examination (NDE) personnel be performed by a Recognized Third Party Organization (RTPO) recognized specifically for this task. The traditional ASME approach has been to place responsibility for qualification of such personnel on the manufacturer (employer). Some years ago, Section V of th

43、e ASME Boiler and Pressure Vessel Code 5 was revised to recognize the American Society for Nondestructive Testing (ASNT) ASNT Central Certificate Program (ACCP). This allowed manufacturers to utilize a central certification program instead of performing the testing themselves, provided the process w

44、as described in the manufacturers quality program. In response to requests from Europe, a recent addendum to Section V expanded the provision even further, recognizing any national or regional certification program, provided it meets the minimum requirements of Section V and the process is described

45、 in the manufacturers quality system. This allowed users of ASME standards in Europe to use their existing qualifications to meet both the ASME Code and the PED. In the United States, ASNT entered into an agreement with a European RTPO wherein the results of the ASNT ACCP program were acceptable as

46、meeting the requirements of the equivalent European program, and those of the PED. Therefore, manufacturers that qualify their NDE personnel under the ACCP program realize cost savings by not having to develop their own testing programs, and they are able to meet the PED requirements at the same tim

47、e. 2.3 Discussions with the European Commission Beginning in April 2002, ASME has been involved in an exchange of correspondence between the U.S. Department of Commerce and the European Commissions Enterprise Directorate-General (DG), the office responsible for the PED. The issues discussed above, a

48、nd others, were included in this correspondence, and the result was a meeting between the two offices held in May 2004 in Washington, D.C. There was general agreement among those present regarding what the major issues were in complying with the PED. There were also discussions regarding the U.S. pr

49、essure equipment regulatory system and the role that ASME Codes and Standards play in that system. Some suggestions were made regarding reconciliation of material specifications and another meeting was held in September 2004 that included industry representatives from both the United States and Europe. ASME will continue to pursue these and other avenues for progress in maintaining and improving the recognition of its Codes and Standards around the world through technical improve