BS ISO IEC 27033-2-2012 Information technology Security techniques Guidelines for the design and implementation of network security《信息技术 保密技术 网络安全 网络安全设计和实施导则》.pdf

《BS ISO IEC 27033-2-2012 Information technology Security techniques Guidelines for the design and implementation of network security《信息技术 保密技术 网络安全 网络安全设计和实施导则》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 27033-2-2012 Information technology Security techniques Guidelines for the design and implementation of network security《信息技术 保密技术 网络安全 网络安全设计和实施导则》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication Information technology - Security techniques - Network Part 2: Guidelines for the design and implementation of network security BS ISO/IEC 27033-2:2012 Incorporating corrigendum September 2015 security BS ISO/IEC 27033-2:2012 BRITISH STANDARD National foreword This British

2、Standard is the UK implementation of ISO/IEC 27033-2:2012. It supersedes BS ISO/IEC 18028-2:2006 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/33, IT - Security techniques. A list of organizations represented on this committee can be obtained on

3、 request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 91637 3 ICS 35.040 Compliance with a B

4、ritish Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2012. Amendments/corrigenda issued since publication Date T e x t a f f e c t e d 30 September 2015 Implementation of ISO

5、 corrected text 15 August 2012: Title and cover page updated. Reference number ISO/IEC 27033-2:2012(E) ISO/IEC 2012INTERNATIONAL STANDARD ISO/IEC 27033-2 First edition 2012-08-01 Corrected version 2012-08-15 Information technology Security techniques Network security Part 2: Guidelines for the desig

6、n and implementation of network security Technologies de linformation Techniques de scurit Scurit de rseau Partie 2: Lignes directrices pour la conception et limplmentation de la scurit de rseau ISO/IEC 27033-2:2012(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2012 All rights reserved. Unless otherwise s

7、pecified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright offic

8、e Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2012 All rights reservedBS ISO/IEC 27033-2:2012ISO/IEC 27033-2:2012(E) ISO/IEC 2012 All rights reserved iiiContents Page Foreword . v 1 Scope 1

9、 2 Normative references 1 3 Terms and definitions . 1 4 Abbreviations . 2 5 Document structure 2 6 Preparing for design of network security . 3 6.1 Introduction 3 6.2 Asset identification . 3 6.3 Requirements collection . 3 6.3.1 Legal and regulatory requirements . 3 6.3.2 Business requirements . 4

10、6.3.3 Performance requirements . 4 6.4 Review requirements 4 6.5 Review of existing designs and implementations . 5 7 Design of network security 5 7.1 Introduction 5 7.2 Design principles . 6 7.2.1 Introduction 6 7.2.2 Defence in depth 6 7.2.3 Network Zones . 7 7.2.4 Design resilience . 7 7.2.5 Scen

11、arios . 8 7.2.6 Models and Frameworks. 8 7.3 Design Sign off 8 8 Implementation 8 8.1 Introduction 8 8.2 Criteria for Network component selection 9 8.3 Criteria for product or vendor selection . 9 8.4 Network management . 10 8.5 Logging, monitoring and incident response 11 8.6 Documentation 11 8.7 T

12、est plans and conducting testing 11 8.8 Sign off . 12 Annex A (informative) Cross-references between ISO/IEC 27001:2005/ISO/IEC 27002:2005 network security related controls and ISO/IEC 27033-2:2012 clauses . 13 Annex B (informative) Example documentation templates 14 B.1 An example network security

13、architecture document template . 14 B.1.1 Introduction 14 B.1.2 Business related requirements 14 B.1.3 Technical architecture 14 B.1.4 Network services . 17 B.1.5 Hardware/physical layout . 17 B.1.6 Software . 18 B.1.7 Performance . 19 B.1.8 Known issues 19 B.1.9 References . 19 BS ISO/IEC 27033-2:2

14、012ISO/IEC 27033-2:2012(E) iv ISO/IEC 2012 All rights reservedB.1.10 Appendices .20 B.1.11 Glossary 20 B.2 An example template for a Functional Security requirements document .20 B.2.1 Introduction 20 B.2.2 Firewall configuration .21 B.2.3 Security risks .21 B.2.4 Security management .22 B.2.5 Secur

15、ity administration .22 B.2.6 Authentication and access control 22 B.2.7 (Audit) Logging 23 B.2.8 Information Security incident management 23 B.2.9 Physical security23 B.2.10 Personnel security .23 B.2.11 Appendices .23 B.2.12 Glossary 23 Annex C (informative) ITU-T X.805 framework and ISO/IEC 27001:

16、2005 control mapping 24 Bibliography 28 BS ISO/IEC 27033-2:2012ISO/IEC 27033-2:2012(E) ISO/IEC 2012 All rights reserved vForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization

17、. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual in

18、terest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance wi

19、th the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard re

20、quires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 27033-2 was p

21、repared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 27, IT Security techniques. This first edition of ISO/IEC 27033-2 cancels and replaces ISO/IEC 18028-2:2006, which has been technically revised. ISO/IEC 27033 consists of the following parts, under the genera

22、l title Information technology Security techniques Network security: Part 1: Overview and concepts Part 2: Guidelines for the design and implementation of network security Part 3: Reference networking scenarios Threats, design techniques and control issues The following parts are under preparation:

23、Part 4: Securing communications between networks using security gateways Part 5: Securing communications across networks using Virtual Private Networks (VPNs) Securing IP network access using wireless will form the subject of a future Part 6. Further parts may follow because of the ever-changing and

24、 evolving technology in the network security area. This corrected version of ISO/IEC 27033-2:2012 corrects the title on the cover page and on page 1. BS ISO/IEC 27033-2:2012INTERNATIONAL STANDARD ISO/IEC 27033-2:2012(E) ISO/IEC 2012 All rights reserved 1Information technology Security techniques Net

25、work security Part 2: Guidelines for the design and implementation of network security 1 Scope This part of ISO/IEC 27033 gives guidelines for organizations to plan, design, implement and document network security. 2 Normative references The following referenced documents are indispensable for the a

26、pplication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 7498 (all parts), Information technology Open Systems Interconnection Basic Reference Model ISO/IEC 270

27、00:2009, Information technology Security techniques Information security management systems Overview and vocabulary ISO/IEC 27001:2005, Information technology Security techniques Information security management systems Requirements ISO/IEC 27002:2005, Information technology Security techniques Code

28、of practice for information security management ISO/IEC 27005:2011, Information technology Security techniques Information security risk management ISO/IEC 27033-1, Information technology Security techniques Network security Part 1: Overview and concepts 3 Terms and definitions For the purposes of t

29、his document, the terms and definitions given in ISO/IEC 7498 (all parts), ISO/IEC 27000, ISO/IEC 27001, ISO/IEC 27002, ISO/IEC 27005, and ISO/IEC 27033-1 apply. BS ISO/IEC 27033-2:2012ISO/IEC 27033-2:2012(E) 2 ISO/IEC 2012 All rights reserved4 Abbreviations For the purposes of this document, the ab

30、breviations used in ISO/IEC 27033-1 and the following are applicable. IPS Intrusion Prevention System POC Proof of Concept RADIUS Remote Authentication Dial-In User Service RAS Remote Access Service SMS Simple Message Service SMTP Simple Mail Transfer Protocol TACACS Terminal Access Controller Acces

31、s-Control System TFTP Trivial File Transfer Protocol TLS Transport Layer Security 5 Document structure The structure of ISO/IEC 27033-2 comprises: Preparing for Design of Network Security Introduction Asset Identification Requirements collection Review of requirements Review of existing designs and

32、implementations Design of Network Security Introduction Design principles Design Signoff Implementation Introduction Criteria for network component selection Criteria for product or vendor selection BS ISO/IEC 27033-2:2012ISO/IEC 27033-2:2012(E) ISO/IEC 2012 All rights reserved 3 Network management

33、Logging, monitoring and incident response Documentation Test Plans and Conducting Testing Sign off 6 Preparing for design of network security 6.1 Introduction The objectives of network security are to enable the information flows that enhance an organisations business processes, and to prevent infor

34、mation flows that degrade an organisations business processes. The preparation work for the design and the implementation of network security involves the following stages: Asset identification Requirements collection Review of requirements Evaluation of technical options and constraints Evaluation

35、of existing designs and implementations These stages should result in the early documentation consisting of all the inputs for following design and implementation steps. 6.2 Asset identification Identification of assets is a critical first step in determining the information security risks to any ne

36、twork. The assets to be protected are those which would degrade the organizations business processes were they to be inappropriately disclosed, modified or unavailable. They include physical assets (servers, switches, routers, etc), and logical assets (configuration settings, executable code, data,

37、etc). This register of assets should already exist as part of continutiy planning/Disaster recovery risk analysis. The questions that must be answered are: What are the distinct types of network equipment and facility groupings that need to be protected? What are the distinct types of network activi

38、ties that need to be protected? What information assets and information processing capabilities need to be protected ? Where information assets reside in the information systems architecture? Identifiable assets include those required to securely support management, control and user traffic and the

39、features required for the functioning of the network infrastructure, services, and applications. These include devices such as hosts, routers, firewalls, etc, interfaces (internal and external), information stored/processed and protocols used. The protection of infrastructure assets is only part of

40、the objective of the network security design. The principle objective is the protection of business assets such as information and business processes. 6.3 Requirements collection 6.3.1 Legal and regulatory requirements The legal and regulatory requirements for the location and function of the networ

41、k should be gathered and reviewed to ensure that the requirements are met in the design of the network. Particular care should be taken where information flows across jurisdictional or regulatory boundaries. In such cases, the requirements of both sides of the boundary must be recorded. BS ISO/IEC 2

42、7033-2:2012ISO/IEC 27033-2:2012(E) 4 ISO/IEC 2012 All rights reserved6.3.2 Business requirements The organizations business processes and data classification types determine its access requirements. The network should be configured to enable this access, to and from its information assets, for suita

43、bly authorised users, and prevent all other access. Access to Information will often relate to services on open ports (for example HTTP on TCP port 80) specific hosts (such as www.example.org at IP address 10.11.12.13) particular groups of hosts (for example the 172.128.97.64/24 subnet) or particula

44、r network interface devices (such as the interface with MAC address 10:00:00:01:02:03). The organisation will need to identify those services that it provides to others, those services that it uses of others, and those services it provides internally. 6.3.3 Performance requirements Traffic data is r

45、equired to enable the configurations for the communication lines, servers and security gateways/firewalls to be documented such that on implementation a good level of service can be provided in accordance with user expectations with no over-configuration and related unnecessary costs. Information sh

46、ould be gathered on such as the speeds of any existing communication links, configuration/capacity of routers at any third party locations, the number of users that will be allowed access via each link (concurrent access and number of users with access), minimum, average and maximum user connect tim

47、e required, identity of what authorized users will access over the link, number of web page hits required, database access hits required, growth expected over one year and three/five years, and whether a Windows log-on is required. Use could be made of telecommunications table (queuing) theory for s

48、izing the number of ports, channels required, particularly over dial-up links. These performance requirements should be reviewed, queries resolved and the performance criteria required to be met by the technical architecture and related technical security architecture formally agreed. 6.4 Review req

49、uirements A review of the current capabilities and any planned technical network architecture changes needs to be done and compared to the technical security architecture being developed to note any incompatibilities. Any incompatibilities need to then be reviewed and the appropriate architectures modified. The information to be gathered during the review should include at a minimum the following: identification of the typ