BS ISO IEC 15946-1-2016 Information technology Security techniques Cryptographic techniques based on elliptic curves General《信息技术 安全技术 基于椭圆形曲线的密码技术 总则》.pdf

《BS ISO IEC 15946-1-2016 Information technology Security techniques Cryptographic techniques based on elliptic curves General《信息技术 安全技术 基于椭圆形曲线的密码技术 总则》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 15946-1-2016 Information technology Security techniques Cryptographic techniques based on elliptic curves General《信息技术 安全技术 基于椭圆形曲线的密码技术 总则》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO/IEC 15946-1:2016 Information technology Security techniques Cryptographic techniques based on elliptic curves Part 1: General BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO/IEC 15946-1:2016 BRITISH STANDARD National foreword This British Standard is t

2、he UK implementation of ISO/IEC 15946-1:2016. It supersedes BS ISO/IEC 15946-1:2008 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/33/2, Cryptography and Security Mechanisms. A list of organizations represented on this committee can be obtained o

3、n request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 89183 0 ICS 35.040 Compliance with a

4、British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2016. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS ISO/IEC 15946-1:2016 Information techn

5、ology Security techniques Cryptographic techniques based on elliptic curves Part 1: General Technologies de linformation Techniques de scurit Techniques cryptographiques bases sur les courbes elliptiques Partie 1: Gnralits INTERNATIONAL STANDARD ISO/IEC 15946-1 Reference number ISO/IEC 15946-1:2016(

6、E) Third edition 2016-07-01 ISO/IEC 2016 BS ISO/IEC 15946-1:2016ii ISO/IEC 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or

7、by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8

8、CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 15946-1:2016(E)BS ISO/IEC 15946-1:2016ISO/IEC 15946-1:2016(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erms and definitions . 1 4 Symbols 2 5 C on v e

9、ntions for fields 3 5.1 Finite prime fields F(p) 3 5.2 Finite fields F(p m ) . 3 6 Conventions for elliptic curves 4 6.1 Definitions of elliptic curves 4 6.1.1 Elliptic curves over F(p m ) . 4 6.1.2 Elliptic curves over F(2 m ) 4 6.1.3 Elliptic curves over F(3 m ) 5 6.2 Group law on elliptic curves

10、5 6.3 Generation of elliptic curves . 5 6.4 Cryptographic bilinear map . 5 7 Conversion functions . 6 7.1 Octet string/bit string conversion: OS2BSP and BS2OSP 6 7.2 Bit string/integer conversion: BS2IP and I2BSP . 6 7.3 Octet string/string conversion: OS2IP and I2OSP 6 7.4 Finite field element/inte

11、ger conversion: FE2IP F. 7 7.5 Octet string/finite field element conversion: OS2FEP Fand FE2OSP F. 7 7.6 Elliptic curve point/octet string conversion: EC2OSP Eand OS2ECP E. 7 7.6.1 Compressed elliptic curve points 7 7.6.2 Point decompression algorithms . 7 7.6.3 Conversion functions . 8 7.7 Integer/

12、elliptic curve conversion: I2ECP . 8 8 Elliptic curve domain parameters and public key . 9 8.1 Elliptic curve domain parameters over F(q) . 9 8.2 Elliptic curve key generation 9 Annex A (informative) Back gr ound information on finit e fields .10 Annex B (informative) Background information on ellip

13、tic curves 12 Annex C (informative) Background information on elliptic curve cryptosystems 22 Annex D (informative) Summary of coordinate systems 30 Bibliography .31 ISO/IEC 2016 All rights reserved iii Contents PageBS ISO/IEC 15946-1:2016ISO/IEC 15946-1:2016(E) Foreword ISO (the International Organ

14、ization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the res

15、pective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of informa

16、tion technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differen

17、t types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shal

18、l not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document i

19、s information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT

20、), see the following URL: Foreword Supplementary information. The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 27, Security techniques. This third edition cancels and replaces the second edition (ISO/IEC 15946-1:2008 with ISO/IEC 15946-1/Cor 1:200

21、9), which has been technically revised. ISO/IEC 15946 consists of the following parts, under the general title Information technology Security techniques Cryptographic techniques based on elliptic curves: Part 1: General Part 5: Elliptic curve generationiv ISO/IEC 2016 All rights reservedBS ISO/IEC

22、15946-1:2016ISO/IEC 15946-1:2016(E) Introduction Cryptosystems based on elliptic curves defined over finite fields provide an interesting alternative to the RSA cryptosystem and to finite field discrete log based cryptosystems. The concept of an elliptic curve based public-key cryptosystem is simple

23、. Every elliptic curve over a finite field is endowed with an addition operation “+” under which it forms a finite abelian group. The group law on elliptic curves extends in a natural way to a “discrete exponentiation” on the point group of the elliptic curve. Based on the discrete exponentiation on

24、 an elliptic curve, one can easily derive elliptic curve analogues of the well-known public-key schemes of the DiffieHellman and ElGamal type. The security of such a public-key cryptosystem depends on the difficulty of determining discrete logarithms in the group of points of an elliptic curve. This

25、 problem is, with current knowledge, much harder for a given parameter size than the factorisation of integers or the computation of discrete logarithms in a finite field. Indeed, since Miller and Koblitz independently suggested the use of elliptic curves for public-key cryptographic systems in 1985

26、, the elliptic curve discrete logarithm problem has only been shown to be solvable in certain specific, and easily recognisable, cases. There has been no substantial progress in finding a method for solving the elliptic curve discrete logarithm problem on arbitrary elliptic curves. Thus, it is possi

27、ble for elliptic curve based public-key systems to use much shorter parameters than the RSA system or the classical discrete logarithm based systems that make use of the multiplicative group of some finite field. This yields significantly shorter digital signatures and system parameters and the inte

28、gers to be handled by a cryptosystem are much smaller. This part of ISO/IEC 15946 describes the mathematical background and general techniques necessary for implementing the elliptic curve cryptography mechanisms defined in ISO/IEC 15946-5, ISO/IEC 9796-3, ISO/IEC 11770-3, ISO/IEC 14888-3, ISO/IEC 1

29、8033-2 and other ISO/IEC standards. It is the purpose of this part of ISO/IEC 15946 to meet the increasing interest in elliptic curve based public-key technology and to describe the components that are necessary to implement secure elliptic curve cryptosystems such as key-exchange, key-transport and

30、 digital signatures. The International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) draw attention to the fact that it is claimed that compliance with this part of ISO/IEC 15946 may involve the use of patents. The ISO and IEC take no position concern

31、ing the evidence, validity and scope of these patent rights. The holders of these patent rights have assured the ISO and IEC that they are willing to negotiate licenses under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statements

32、of the holders of these patent rights are registered with ISO and IEC. Information may be obtained from:Certicom Corp. Address: 4701 Tahoe Blvd., Building A, Mississauga, ON L4W0B5, CanadaMatsushita Electric Industrial Co., Ltd. Address: 1006, Kadoma, Kadoma City, Osaka, 571-8501, Japan Attention is

33、 drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO and/or IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/ /patents.iec.ch) maintain

34、on-line databases of patents relevant to their standards. Users are encouraged to consult the databases for the most up to date information concerning patents. ISO/IEC 2016 All rights reserved vBS ISO/IEC 15946-1:2016BS ISO/IEC 15946-1:2016Information technology Security techniques Cryptographic tec

35、hniques based on elliptic curves Part 1: General 1 Scope This part of ISO/IEC 15946 describes the mathematical background and general techniques necessary for implementing the elliptic curve cryptography mechanisms defined in ISO/IEC 15946-5, ISO/IEC 9796-3, ISO/IEC 11770-3, ISO/IEC 14888-3, ISO/IEC

36、 18033-2 and other ISO/IEC standards. This part of ISO/IEC 15946 does not specify the implementation of the techniques it defines. For example, it does not specify the basis representation to be used when the elliptic curve is defined over a finite field of characteristic two. Thus, interoperability

37、 of products complying with this part of ISO/IEC 15946 will not be guaranteed. 2 Normative references The following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies.

38、For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 15946-5, Information technology Security techniques Cryptographic techniques based on elliptic curves Part 5: Elliptic curve generation 3 T erms a nd definiti ons For the purposes of thi

39、s document, the following terms and definitions apply. 3.1 abelian group group (S, * ) such that a * b = b * a for every a and b in S 3.2 cubic curve set of solutions, made up of pairs of elements of a specified field known as points, to a cubic equation of special form 3.3 elliptic curve cubic curv

40、e E without a singular point Note 1 to entry: The set of points E together with an appropriately defined operation (see 6.2) forms an abelian group. The field that includes all coefficients of the equation describing E is called the definition field of E. In this part of ISO/IEC 15946, only finite f

41、ields F are dealt with as the definition field. When it is necessary to describe the definition field F of E explicitly, the curve is denoted as E/F. Note 2 to entry: The form of a cubic curve equation used to define an elliptic curve varies depending on the field. The general form of an appropriate

42、 cubic equation for all possible finite fields is defined in 6.1. Note 3 to entry: A definition of a cubic curve is given in Reference 15. INTERNATIONAL ST ANDARD ISO/IEC 15946-1:2016(E) ISO/IEC 2016 All rights reserved 1BS ISO/IEC 15946-1:2016ISO/IEC 15946-1:2016(E) 3.4 f ie ld set of elements S an

43、d a pair of operations (+, * ) defined on S such that: (i) a * (b + c) = a * b + a * c for every a, b and c in S, (ii) S together with + forms an abelian group (with identity element 0), and (iii) S excluding 0 together with *forms an abelian group 3.5 f i n i t e f ie ld field containing a finite n

44、umber of elements Note 1 to entry: For any positive integer m and a prime p, there exists a finite field containing exactly p melements. This field is unique up to isomorphism and is denoted by F(p m ), where p is called the characteristic of F(p m ). 3.6 group set of elements S and an operation *de

45、fined on the set of elements such that (i) a * (b * c) = (a * b) * c for every a, b and c in S, (ii) there exists an identity element e in S such that a * e = e * a = a for every a in S, and (iii) for every a in S there exists an inverse element a 1in S such that a * a 1= a 1 * a = e 3.7 cryptograph

46、ic bilinear map map satisfying the non-degeneracy, bilinearity, and computability conditions Note 1 to entry: Definitions of non-degeneracy, bilinearity and computability are provided in 6.4. 3.8 singular point point at which a given mathematical object is not defined 4 Symbols B smallest integer su

47、ch that n divides q B -1 d private key of a user (d is a random integer in the set 2, n-2) E elliptic curve, given by an equation of the form Y 2= X 3+ aX + b over the field F(p m ) for P 3, by an equation of the form Y 2+ XY = X 3+ aX 2+ b over the field F(2 m ), or by an equation of the form Y 2=

48、X 3+ aX 2+ b over the field F(3 m ), together with an extra point O Ereferred to as the point at infinity; the curve is denoted by E/F(p m ), E/F(2 m ), or E/F(3 m ), respectively E(F(q) set of F(q)-valued points of E together with O E #E(F(q) order (or cardinality) of E(F(q) En n-torsion group of E

49、, that is Q E | nQ = O E e n cryptographic bilinear map |F | number of elements in F F(q) finite field consisting of exactly q elements; this includes the cases of F(p), F(2 m ), and F(p m ) F(q)* F(q)0 F G base point on E with prime order ngroup generated by G with prime cardinality n h cofactor of E(F(q)2 ISO/IEC 2016 All rights reservedBS ISO/IEC 15946-1:2016ISO/IEC 15946-1:2016(E) kQ kth multiple of some point Q of E, i.e. kQ = Q + + Q (k summa