BS ISO IEC 15693-1-2010 Identification cards Contactless integrated circuit cards Vicinity cards Physical characteristics《识别卡 无触点集成电路卡 近距型卡 物理特性》.pdf

《BS ISO IEC 15693-1-2010 Identification cards Contactless integrated circuit cards Vicinity cards Physical characteristics《识别卡 无触点集成电路卡 近距型卡 物理特性》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 15693-1-2010 Identification cards Contactless integrated circuit cards Vicinity cards Physical characteristics《识别卡 无触点集成电路卡 近距型卡 物理特性》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 15693-1:2010 Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristicsBS ISO/IEC 15693-1:2010 BRITISH STANDARD Natio

2、nal foreword This British Standard is the UK implementation of ISO/IEC 15693-1:2010. It supersedes BS ISO/IEC 15693-1:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/17, Cards and personal identification. A list of organizations represented o

3、n this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2010 ISBN 978 0 580 69842 2 ICS 35.240.15 Compliance with a British Standard cannot confer imm

4、unity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2010. Amendments issued since publication Date Text affectedBS ISO/IEC 15693-1:2010Reference number ISO/IEC 15693-1:2010(E) ISO/IEC 2010INTERNATIONAL ST

5、ANDARD ISO/IEC 15693-1 Second edition 2010-10-01 Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics Cartes didentification Cartes circuit intgr sans contact Cartes de voisinage Partie 1: Caractristiques physiques BS ISO/IEC 15693-1:2010 ISO/IEC

6、15693-1:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloa

7、ding this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the Ge

8、neral Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address giv

9、en below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at

10、 the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2010 All rights reservedBS ISO/IEC 15693-1:2010 ISO/

11、IEC 15693-1:2010(E) ISO/IEC 2010 All rights reserved iiiForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in t

12、he development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-g

13、overnmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main ta

14、sk of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a

15、 vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15693-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information t

16、echnology, Subcommittee SC 17, Cards and personal identification. This second edition cancels and replaces the first edition (ISO/IEC 15693-1:2000), which has been technically revised. ISO/IEC 15693 consists of the following parts, under the general title Identification cards Contactless integrated

17、circuit cards Vicinity cards: Part 1: Physical characteristics Part 2: Air interface and initialization Part 3: Anticollision and transmission protocol BS ISO/IEC 15693-1:2010 ISO/IEC 15693-1:2010(E) iv ISO/IEC 2010 All rights reservedIntroduction Contactless card standards encompass a variety of ty

18、pes as embodied in ISO/IEC 10536 (close-coupled cards), ISO/IEC 14443 (proximity cards) and ISO/IEC 15693 (vicinity cards). These device types are intended, respectively, for operation when very near, nearby and at a longer distance from associated coupling devices. ISO/IEC 15693 defines the technol

19、ogy-specific requirements for identification cards conforming to ISO/IEC 7810 and thin flexible cards conforming to ISO/IEC 15457-1, and the use of such cards to facilitate international interchange. However, it also recognizes that the technology offers the possibility that vicinity objects be prov

20、ided in forms other than that of the International Standard card formats. Furthermore, it does not preclude the incorporation of other standard technologies on the card, such as those referenced in the Bibliography. ISO/IEC 15693 accommodates the operation of vicinity cards in the presence of other

21、contactless cards conforming to ISO/IEC 10536 and ISO/IEC 14443. This part of ISO/IEC 15693 does not preclude the application to the VICC of other existing card technology standards, such as those listed in the Bibliography. BS ISO/IEC 15693-1:2010 INTERNATIONAL STANDARD ISO/IEC 15693-1:2010(E) ISO/

22、IEC 2010 All rights reserved 1Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics 1 Scope This part of ISO/IEC 15693 defines the physical characteristics of vicinity cards (VICCs). It is used in conjunction with other parts of ISO/IEC 15693. 2 No

23、rmative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 7810, Identification c

24、ards Physical characteristics ISO/IEC 15457-1, Identification cards Thin flexible cards Part 1: Physical characteristics 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 7810, ISO/IEC 15457-1 and the following apply. 3.1 integrated circuit IC elec

25、tronic component designed to perform processing and/or memory functions 3.2 contactless pertaining to the achievement of signal exchange with, and supply of power to, the card without the use of galvanic elements (i.e. the absence of an ohmic path from the external interfacing equipment to the integ

26、rated circuit contained within the card) 3.3 contactless integrated circuit card card into which integrated circuit and coupling means have been placed, such that communication to such integrated circuit is done in a contactless manner 3.4 operate as intended operate in the manner described by the m

27、anufacturers specification in accordance with ISO/IEC 15693 BS ISO/IEC 15693-1:2010 ISO/IEC 15693-1:2010(E) 2 ISO/IEC 2010 All rights reserved3.5 VICC vicinity card contactless integrated circuit card or other object with which communication and power transfer are done by inductive coupling in vicin

28、ity of a coupling device 4 Physical characteristics 4.1 General The VICC may be in the form of a card compliant with ISO/IEC 7810 or ISO/IEC 15457-1, or an object of any other dimension. 4.2 Antenna If the VICC dimensions are not compliant with ISO/IEC 7810 or ISO/IEC 15457-1, the dimensions of the

29、VICC antenna shall not exceed 86 mm 54 mm 3 mm in order to maximize interoperability. NOTE This antenna size restriction stems from the fact that the radio frequency power and signal interface defined in ISO/IEC 15693-2 and its test methods in ISO/IEC 10373-7 are based on ID-1 cards. The test method

30、s can give unreliable results with antennas larger than that defined above. 4.3 Alternating magnetic field The VICC, whichever form the VICC has according to 4.1, shall continue to operate as intended after continuous exposure to a magnetic field of an average level of 10 A/m rms at 13,56 MHz. The a

31、veraging time is 30 seconds and the maximum level of the magnetic field is limited to 12 A/m rms. 4.4 Additional information Surface quality for printing is discussed in Annex A. When a hole slot is optionally implemented, the slot should be as shown in Annex B. BS ISO/IEC 15693-1:2010 ISO/IEC 15693

32、-1:2010(E) ISO/IEC 2010 All rights reserved 3Annex A (informative) Surface quality for printing Where there is a requirement to customize the VICC after the manufacturing process by overprinting, care should be taken to ensure the areas used for printing are of sufficient quality appropriate to the

33、printing technique or printer used. BS ISO/IEC 15693-1:2010 ISO/IEC 15693-1:2010(E) 4 ISO/IEC 2010 All rights reservedAnnex B (informative) Hole slot When a slot is optionally implemented the slot size and slot location should be as shown in either Figure B.1 or Figure B.2. Figure B.1 Hole Slot for

34、Portrait Orientation Figure B.2 Hole Slot for Landscape Orientation The VICC IC(s) and inductive coupling element shall be positioned such that either slot as shown in Figure B.1 and Figure B.2 can be implemented without interference to either the IC(s) or inductive coupling element. WARNING Cards w

35、ith hole slots can cause problems in automatic card handling equipment, for example cash dispensers. BS ISO/IEC 15693-1:2010 ISO/IEC 15693-1:2010(E) ISO/IEC 2010 All rights reserved 5Bibliography 1 ISO/IEC 7811 (all parts), Identification cards Recording technique 2 ISO/IEC 7812 (all parts), Identif

36、ication cards Identification of issuers 3 ISO/IEC 7813, Information technology Identification cards Financial transaction cards 4 ISO/IEC 7816 (all parts), Identification cards Integrated circuit cards 5 ISO/IEC 10373-7, Identification cards Test methods Part 7: Vicinity cards 6 ISO/IEC 10536 (all p

37、arts), Identification cards Contactless integrated circuit(s) cards Close- coupled cards 7 ISO/IEC 14443 (all parts), Identification cards Contactless integrated circuit cards Proximity cards 8 ISO/IEC 15457 (all parts), Identification cards Thin flexible cards NOTE Restrictions might apply to embos

38、sing of VICCs (see ISO/IEC 7811-1). BS ISO/IEC 15693-1:2010 ISO/IEC 15693-1:2010(E) ICS 35.240.15 Price based on 5 pages ISO/IEC 2010 All rights reserved This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publ

39、ications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. British Standards Institution (BSI) raising standards worldwide BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 90

40、01 Fax +44 (0)20 8996 7001 British Standards are updated by amendment or revision. Users of British Stan- dards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and serv- ices. We would be grateful if anyone f

41、inding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical com- mittee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 BSI offers Members an individual updating service c

42、alled PLUS which ensures that subscribers automatically receive the latest editions of standards. Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001 Email: Buying standards You may buy PDF and hard copy versions of standards directly using a credit card from the BSI Shop on the website In addition

43、all orders for BSI, international and foreign standards publications can be addressed to BSI Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publi

44、shed as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Knowledge Centre. Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005 Email: Various BSI electronic information servic

45、es are also available which give details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and

46、other benefits contact Membership Ad- ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards Online can be found at Further information about BSI is available on the BSI website at www.bsi- Copyright Co

47、pyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Ex- cept as permitted under the Copyright, Designs and Patents Act 1988 no ex- tract may be reproduced, stored in a retrieval system or transmitted in a

48、ny form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copy- right & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: