BS ISO IEC 15504-6-2013 Information technology Process assessment An exemplar system life cycle process assessment model《信息技术 过程评估 典型系统生存周期过程评估模型》.pdf

《BS ISO IEC 15504-6-2013 Information technology Process assessment An exemplar system life cycle process assessment model《信息技术 过程评估 典型系统生存周期过程评估模型》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 15504-6-2013 Information technology Process assessment An exemplar system life cycle process assessment model《信息技术 过程评估 典型系统生存周期过程评估模型》.pdf（134页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 15504-6:2013 Information technology Process assessment Part 6: An exemplar system life cycle process assessment modelBS ISO/IEC 15504-6:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 15504-6:2013. It supersedes P

2、D ISO/IEC TR 15504-6:2008 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/15, Software and systems engineering. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to

3、 include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 78230 5 ICS 35.080 Compliance with a British Standard cannot confer immunity from legal obligations.

4、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2013. Amendments issued since publication Date Text affectedBS ISO/IEC 15504-6:2013Reference number ISO/IEC 15504-6:2013(E) ISO/IEC 2013INTERNATIONAL STANDARD ISO/IEC 15504-6 First editi

5、on 2013-06-15Information technology Process assessment Part 6: An exemplar system life cycle process assessment model Technologies de linformation valuation des procds Partie 6: Un exemple de modle dvaluation des procds du cycle de vie dun systme BS ISO/IEC 15504-6:2013 ISO/IEC 15504-6:2013(E) COPYR

6、IGHT PROTECTED DOCUMENT ISO/IEC 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written pe

7、rmission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/

8、IEC 2013 All rights reservedBS ISO/IEC 15504-6:2013 ISO/IEC 15504-6:2013(E) ISO/IEC 2013 All rights reserved iiiContents Page Foreword . v Introduction vi 1 Scope 1 2 Normative references 1 3 Terms and definitions . 1 4 Overview of the exemplar Process Assessment Model 1 4.1 Introduction to Overview

9、 1 4.2 Structure of the exemplar Process Assessment Model 2 4.2.1 Processes . 4 4.2.2 Process dimension 6 4.2.3 Capability dimension 7 4.3 Assessment Indicators . 8 4.3.1 Process Capability Indicators 9 4.3.2 Process Performance Indicators . 11 4.4 Measuring process capability 11 5 The process dimen

10、sion 12 5.1 Processes and Process Performance Indicators (level 1) 12 5.2 Agreement Processes (AGR) . 13 5.2.1 Introduction 13 5.2.2 AGR.1 Acquisition Process 13 5.2.3 AGR.2 Supply Process 16 5.3 Organizational Project-Enabling Processes (ENT) 18 5.3.1 Introduction 18 5.3.2 ENT.1 Life Cycle Model Ma

11、nagement Process . 18 5.3.3 ENT.2 Project Portfolio Management Process . 20 5.3.4 ENT.3 Infrastructure Management Process 22 5.3.5 ENT.4 Human Resource Management Process 23 5.3.6 ENT.5 Quality Management Process 25 5.4 Project Processes (PRJ) . 26 5.4.1 Introduction 26 5.4.2 PRJ.1 Project Planning

12、Process . 27 5.4.3 PRJ.2 Measurement Process 30 5.4.4 PRJ.3 Project Assessment and Control Process 31 5.4.5 PRJ.4 Decision Management Process . 34 5.4.6 PRJ.5 Risk Management Process . 35 5.4.7 PRJ.6 Configuration Management Process . 38 5.4.8 PRJ.7 Information Management Process . 39 5.5 Technical

13、Processes (TEC) 41 5.5.1 Introduction 41 5.5.2 TEC.1 Stakeholder Requirements Definition Process 42 5.5.3 TEC.2 Requirements Analysis Process . 45 5.5.4 TEC.3 Architectural Design Process 48 5.5.5 TEC.4 Implementation Process . 51 5.5.6 TEC.5 Integration Process 53 5.5.7 TEC.6 Verification Process .

14、 55 5.5.8 TEC.7 Transition Process 57 5.5.9 TEC.8 Validation Process . 59 5.5.10 TEC.9 Operation Process 61 5.5.11 TEC.10 Maintenance Process . 63 5.5.12 TEC.11 Disposal Process 65 BS ISO/IEC 15504-6:2013 ISO/IEC 15504-6:2013(E) iv ISO/IEC 2013 All rights reserved5.6 Tailoring Process (TLR) 67 6 Pro

15、cess capability indicators (level 1 to 5) .69 6.1 Level 1: Performed process 70 6.1.1 PA 1.1 Process performance attribute 70 6.2 Level 2: Managed process 70 6.2.1 PA 2.1 Performance management attribute 70 6.2.2 PA 2.2 Work product management attribute .72 6.3 Level 3: Established process .74 6.3.1

16、 PA 3.1 Process definition attribute 74 6.3.2 PA 3.2 Process deployment attribute 76 6.4 Level 4: Predictable process 79 6.4.1 PA 4.1 Process measurement attribute .79 6.4.2 PA 4.2 Process control attribute 81 6.5 Level 5: Optimizing process .83 6.5.1 PA 5.1 Process innovation attribute 83 6.5.2 PA

17、5.2 Process optimization attribute .85 6.6 Processes Supporting Process Attributes .87 Annex A (informative) Conformity of the exemplar Process Assessment Model 88 A.1 Introduction 88 A.2 Requirements for Process Assessment Models (from ISO/IEC 15504-2) 88 A.2.1 Introduction 88 A.2.2 Process Assessm

18、ent Model scope 88 A.2.3 Process Assessment Model elements and indicators .89 A.2.4 Mapping Process Assessment Models to Process Reference Models 89 A.2.5 Expression of assessment results.92 Annex B (informative) Work product characteristics 93 B.1 Generic Work Products .94 B.2 Generic work products

19、 and specific work products 96 Annex C (informative) Adaptation of the assessment model 116 C.1 Assessment indicators identification . 116 C.1.1 Base practices . 116 C.1.2 Generic practices 117 C.2 Adaptation of the exemplar Process Assessment Model. 118 C.2.1 Adding to or removing processes from th

20、e process dimension . 118 C.2.2 Identifying process performance indicators for a new process 119 Bibliography . 120 BS ISO/IEC 15504-6:2013 ISO/IEC 15504-6:2013(E) ISO/IEC 2013 All rights reserved vForeword ISO (the International Organization for Standardization) and IEC (the International Electrote

21、chnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical

22、activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical c

23、ommittee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulat

24、ed to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held res

25、ponsible for identifying any or all such patent rights. ISO/IEC 15504-6 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 7, Software and systems engineering. This first edition of ISO/IEC 15504-6 cancels and replaces ISO/IEC TR 15504-6:2008. Clause 2 i

26、s modified by updating the reference to ISO/IEC 15288; Clauses 4 and 5 are replaced with new text provided below; Clause 6.6 is replaced with new text provided below; Annex B.2 is replaced with new text provided below; The Bibliography is updated to reflect current versions of works referenced. ISO/

27、IEC 15504 consists of the following parts, under the general title Information technology Process assessment: Part 1: Concepts and vocabulary Part 2: Performing an assessment Part 3: Guidance on performing an assessment Part 4: Guidance on use for process improvement and process capability determina

28、tion Part 5: An exemplar software life cycle process assessment model Part 6: An exemplar system life cycle process assessment model Part 7: Assessment of organizational maturity Part 8: An exemplar process assessment model for IT service management Part 9: Target process profiles Part 10: Safety ex

29、tension BS ISO/IEC 15504-6:2013 ISO/IEC 15504-6:2013(E) vi ISO/IEC 2013 All rights reservedIntroduction This part of ISO/IEC 15504 provides an example of a System Life Cycle Process Assessment Model for use in performing a conformant assessment in accordance with the requirements of ISO/IEC 15504-2.

30、 An integral part of conducting an assessment is to use a process assessment model that is constructed for that purpose, is related to a process reference model and is conformant with ISO/IEC 15504-2, which sets out the minimum requirements for performing an assessment in order to ensure consistency

31、 and repeatability of the ratings. A process reference model cannot be used alone as the basis for conducting consistent and reliable assessments of process capability because it requires greater detail to indicate process performance and capability. Therefore: the descriptions of process purpose an

32、d process outcomes provided by a process reference model need to be supported with a comprehensive set of indicators of process performance; and the capability levels and process attributes defined in ISO/IEC 15504-2 and its associated rating scale need to be supported with a set of indicators of pr

33、ocess capability. This additional detail describes a process reference model in terms of a process assessment model that can enable the assessment of consistent and repeatable ratings of process capability. This Process Assessment Model contains a set of indicators to be considered when interpreting

34、 the intent of its Process Reference Model. These indicators may also be used when implementing a process improvement program or to help evaluate and select an assessment model, method, methodology or tools. The Process Reference Model defined in ISO/IEC 15288:2008 has been used as the basis for the

35、 Process Assessment Model in this part of ISO/IEC 15504. As an exemplar, this Process Assessment Model embodies the core characteristics that could be expected of any Process Assessment Model consistent with ISO/IEC 15504-2. Nevertheless, use of this Process Assessment Model is not required to meet

36、the requirements of ISO/IEC 15504; any other process assessment models meeting the requirements of ISO/IEC 15504-2 may be used in a conformant assessment. This part of ISO/IEC 15504 has a similar structure to Part 5. It may be used in conjunction with Part 5 for joint assessment of system life cycle

37、 processes and software life cycle processes. This part of ISO/IEC 15504 uses the classification structure of the information work products used in ISO 15289 Systems and software engineering Content of systems and software life cycle process information products (Documentation) as a basis for the Ge

38、neric Work Products. Within this part of ISO/IEC 15504: Clause 4 provides a detailed description of the structure and key components of a process assessment model, which includes two dimensions: a process dimension and a capability dimension. Assessment indicators are introduced in this clause; Clau

39、se 5 addresses the process dimension. It uses process definitions from ISO/IEC 15288 to designate the Process Reference Model. The processes of the Process Reference Model are described in the Process Assessment Model in terms of purpose and outcomes and are grouped in four process categories. The P

40、rocess Assessment Model expands the Process Reference Model process definitions by including a set of process performance indicators called base practices for each process. The Process Assessment Model also defines a second set of indicators of process performance by associating work BS ISO/IEC 1550

41、4-6:2013 ISO/IEC 15504-6:2013(E) ISO/IEC 2013 All rights reserved viiproducts with each process. Clause 5 is also linked directly to Annex B, which defines the work product characteristics; Clause 6 addresses the capability dimension. It duplicates the definitions of the capability levels and proces

42、s attributes from ISO/IEC 15504-2, and expands each of the nine attributes through the inclusion of a set of generic practices. These generic practices belong to a set of indicators of process capability, in association with generic resource indicators, and generic work product indicators. Annex B i

43、s also linked directly to Clause 6 as it defines the work product characteristics; Annex A provides a statement of conformance of the Process Assessment Model to the requirements defined in ISO/IEC 15504-2; Annex B provides selected characteristics for typical work products to assist the assessor in

44、 evaluating the capability level of processes; Annex C contains style guides for defining base practices, work products and generic practices for adjusting the Process Assessment Model, and guidance explaining how to expand or adapt the model; and The bibliography contains a list of informative refe

45、rences. BS ISO/IEC 15504-6:2013BS ISO/IEC 15504-6:2013 INTERNATIONAL STANDARD ISO/IEC 15504-6:2013(E) ISO/IEC 2013 All rights reserved 1Information technology Process assessment Part 6: An exemplar system life cycle process assessment model 1 Scope This part of ISO/IEC 15504 constitutes a Process As

46、sessment Model, conformant with the requirements of ISO/IEC 15504-2, for the assessment of process capability of system life cycle processes. The Process Dimension of this Process Assessment Model is based upon the Process Reference Model contained in ISO/IEC 15288. This part of ISO/IEC 15504 provid

47、es a new Process Dimension for the Process Assessment Model derived from the revised Process Reference Model contained in ISO/IEC 15288:2008. The scope of this part of ISO/IEC 15504 is consistent with the scope of ISO/IEC 15504-5 in order to assist situations where assessment is being made of both s

48、ystem and software life cycle processes. NOTE Users of this part of ISO/IEC 15504 can freely reproduce the detailed descriptions contained in the exemplar assessment model as part of any tool or other material to support the performance of process assessments, so that it can be used for its intended

49、 purpose. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 15288:2008, Systems and software engineering System life cycle processes ISO/IEC 15504-1:2004, Information technology Process assessment Part 1: Co