BS ISO 8405-2013 Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes《注塑工具 圆柱头推管 一般用途基本系列》.pdf
《BS ISO 8405-2013 Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes《注塑工具 圆柱头推管 一般用途基本系列》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 8405-2013 Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes《注塑工具 圆柱头推管 一般用途基本系列》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards Publication BS ISO 8405:2013 Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposesBS ISO 8405:2013 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO 8405:2013. It supersedes BS ISO 8405:1998 which is withdrawn.
2、 The UK participation in its preparation was entrusted to Technical Committee MTE/12, Tools for pressing and moulding. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a con
3、tract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 79404 9 ICS 25.120.30 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under t
4、he authority of the Standards Policy and Strategy Committee on 30 September 2013. Amendments issued since publication Date Text affectedBS ISO 8405:2013 ISO 2013 Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes Outillage de moulage jecteurs tubulaires tte cy
5、lindrique Srie de base pour usages gnraux INTERNATIONAL STANDARD ISO 8405 Third edition 2013-09-15 Reference number ISO 8405:2013(E)BS ISO 8405:2013ISO 8405:2013(E)ii ISO 2013 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this p
6、ublication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the c
7、ountry of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in SwitzerlandBS ISO 8405:2013ISO 8405:2013(E) Foreword ISO (the International Organization for Standardization) is a worldwi
8、de federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on tha
9、t committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this docu
10、ment and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directiv
11、es, Part 2. www.iso.org/directives Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of
12、the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms
13、and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: http:/ /www.iso.org/iso/home/standards_development/resources-for- technical-work/foreword.htm The committee responsible
14、for this document is ISO/TC 29, Small tools, Subcommittee SC 8, Tools for pressing and moulding. This third edition cancels and replaces the second edition (ISO 8405:1998), which has been technically revised. ISO 2013 All rights reserved iiiBS ISO 8405:2013BS ISO 8405:2013Tools for moulding Ejector
15、sleeves with cylindrical head Basic series for general purposes 1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, of ejector sleeves with cylindrical head which are used in compression and injection moulds and in die casting dies. It also gives material gui
16、delines and hardness requirements, and specifies the designation of ejector sleeves with cylindrical head. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the editio
17、n cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6751:2011, Tools for moulding Ejector pins with cylindrical head 3 Dimensions The dimensions of ejector sleeves with cylindrical head shall be in accordance with the indicat
18、ions of Figure 1 and Table 1. Surface roughness values in micrometres Key a Ra 0,8 for hot worked steel. Ra 0,4 for alloyed cold worked steel. b t = 0,012 mm (L 1 10 1 ). Figure 1 Ejector sleeves INTERNATIONAL ST ANDARD ISO 8405:2013(E) ISO 2013 All rights reserved 1BS ISO 8405:2013ISO 8405:2013(E)
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO84052013TOOLSFORMOULDINGEJECTORSLEEVESWITHCYLINDRICALHEADBASICSERIESFORGENERALPURPOSES 注塑 工具 圆柱

链接地址:http://www.mydoc123.com/p-395830.html