ASTM E2199 - 08e1 Standard Specification for Encarsia formosa Gahan (HymenopteraAphelinidae) (Withdrawn 2017).pdf

《ASTM E2199 - 08e1 Standard Specification for Encarsia formosa Gahan (HymenopteraAphelinidae) (Withdrawn 2017).pdf》由会员分享，可在线阅读，更多相关《ASTM E2199 - 08e1 Standard Specification for Encarsia formosa Gahan (HymenopteraAphelinidae) (Withdrawn 2017).pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: E2199 081Standard Specification forEncarsia formosa Gahan (Hymenoptera:Aphelinidae)1This standard is issued under the fixed designation E2199; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision.

2、A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1NOTESection 1.1 was editorially corrected in November 2008.1. Scope1.1 This specification describes a method for determiningwhether the quantity

3、 and quality of adult Encarsia formosa ina shipment adhere to quantity and quality specifications. Thetest also allows the purity of shipments to be determined.Included are referenced documents, a description of standardterminology, specifications, and the test method.2. Referenced Documents2.1 ASTM

4、 Standards:2E2200 Specification for Information Included with Packag-ing of Multi-Cellular Biological Control Organisms(Withdrawn 2010)33. Terminology3.1 Definitions:3.1.1 critical valuea number that the test statistic iscompared to in order to determine whether the quantity andquality requirement h

5、as been met. Critical values depend onthe probability of error that can be tolerated and on the numberof samples used in the test.3.1.2 carda sample unit; pupae of E. formosa are mountedon cardstock strips that are subdivided into cards.3.1.3 package claimthe number of adults expected toemerge from

6、and leave each card.3.1.4 test statisticthe average number of wasps caughtduring the flight test expressed as a percentage of the packageclaim.3.2 Definitions of Terms Specific to This Standard:3.2.1 name of productEncarsia formosa Gahan.3.2.2 preferred host and preyGreenhouse Whitefly, Tri-aleurode

7、s vaporariorum (Westwood).3.2.3 life stage when shippedpupa within the host insect,T. vaporariorum.4. Classification4.1 PhylumArthropoda.4.2 ClassInsecta.4.3 OrderHymenoptera.4.4 FamilyAphelinidae.4.5 GenusEncarsia.4.6 Speciesformosa.5. Quantity and Quality Specification5.1 The test described in thi

8、s specification is used for boththe quantity and quality assessment. To meet the quantity andquality specification defined by the “package claim,” 100 % ofthe number of adults should be capable of flight as measured bythe flight test described herein.6. Purity6.1 The purity specification is that shi

9、pments, and hencesamples, do not contain species other than E. formosa.TEST METHODDetermining the Number and FlightCapability of E. formosa Adults in a Shipment, andAssessment of Shipment Purity7. Scope7.1 The test describes methods for determining whether thenumber of adult E. formosa that are capa

10、ble of flight meets orexceeds the package claim.Amethod of assessing the purity ofa shipment is included.8. Summary of Test Method8.1 The quantity of E. formosa per card and their flightability is determined by counting the number of wasps caughton a sticky trap suspended in a test chamber. Three or

11、 more test1This specification is under the jurisdiction of ASTM Committee E35 onPesticides, Antimicrobials, and Alternative Control Agents and are the directresponsibility of Subcommittee E35.30 on Natural Multi-Cellular (Metazoan)Biological Control Organisms.Current edition approved April 1, 2008.

12、Published May 2008. Originallyapproved in 2002. Last previous edition approved in 2002 as E2199 02. DOI:10.1520/E2199-08E01.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, r

13、efer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesNOTICE: This standard has either been su

14、perseded and replaced by a new version or withdrawn.Contact ASTM International (www.astm.org) for the latest information1chambers are used per shipment, each chamber contains onerandomly chosen card with E. formosa pupae. The numbers ofwasps caught on each sticky card are counted and results areused

15、 to calculate the average number of wasps per card. Thisaverage is used in combination with the known samplingdistribution and variation in counts to judge whether specifi-cations are met. Live contaminants are identified and recorded.9. Significance and Use9.1 This method was developed to determine

16、 that thenumbers of E. formosa supplied in a shipment meet thepackage claim and that wasps at receipt have good flightcapability. The application of this method will ensure astandardized evaluation of the product and judicious decisionsabout product compliance to the package claim.10. Materials10.1

17、Test chamber, 6.5 by 8 cm acrylic tube.10.2 Support wire.10.3 Double-sided dry-stick yellow sticky trap, 2.5 by4.0 cm.10.4 Nylon screen, 100- mesh.10.5 Clear plastic cling film, see Fig. 1.10.6 Headband magnifier, (7 to 10) is optional.11. Test Unit11.1 A single shipment of E. formosa is considered

18、a testunit.12. Pre-Test Conditions12.1 If required, a shipment can be stored for a maximum of24 h at 10 to 15C, 60 to 90 % relative humidity.13. Sample Size13.1 Choose three or more sample cards per shipment (seethe interpretation of results to decide on the sample size).14. Sampling and Testing14.1

19、 Place one card on the floor of each chamber. Positionthe yellow sticky trap inside the chamber on the support wire.Seal the top of the chamber with plastic wrap. Place thechamber within the crop, away from the heating pipes and outof direct sunlight. Test conditions should be within 20 to 25Cand 60

20、 to 90 % relative humidity.15. Counting Procedure and Assessment of Purity15.1 After 2 weeks, count the number of wasps caught onthe sticky trap and calculate the average for all chambers used.Express the average as a percentage of the number expected(the package claim) from the card. This value is

21、called the teststatistic. See example in Table 1.15.1.1 Examine the parasitized scales and the yellow stickytrap and record the presence of other live insects or mitesappearing among the parasitoids.16. Properties of the Test16.1 In the absence of other data, the quantity and quality ofwasps in ship

22、ments are assumed to meet or exceed packageclaims. The test statistic and known properties of the counts ofwasps on sticky cards are used to judge whether the packageclaim is met. This is done by comparing the test statistic to acritical value (CV) that is tied to a probability of incorrectlydeclari

23、ng a shipment to be substandard and to the number ofcards tested. The CVs for three sample sizes and differentprobabilities of error are presented in Table 2.ACVisdetermined by selecting a sample size (the number of cardsassessed) and a probability of error. For example, if three cardswere assessed

24、and a probability of error of 0.05 was chosen,CV = 82.FIG. 1 Test ChamberTABLE 1 Example: Test Statistic = 90NOTE 1Example based on three random samples and an expectationof 60 wasps per card (the package claim).Sample Number Wasps on Yellow Card157254351Average 162/3 = 54Observed/Expected 100; (54/

25、60) 100 = 90 %TABLE 2 Critical Values for the Three Sample Sizes (3, 5, and 10Cards) and Corresponding Probabilities of ErrorProbability of Errorfor Sample Size of:CV as %of PackageClaim351070 0.00 0.00 0.0072 0.00 0.00 0.0074 0.01 0.00 0.0076 0.01 0.00 0.0078 0.02 0.00 0.0080 0.03 0.01 0.0082 0.05

26、0.01 0.0084 0.07 0.03 0.0086 0.09 0.05 0.0188 0.13 0.07 0.0290 0.17 0.11 0.0492 0.23 0.17 0.0994 0.29 0.23 0.15E2199 081216.2 Each probability of error in Table 2 is a measure of thelikelihood of wrongly categorizing the package to be deficientwhen it in fact has the specified number of healthy, fli

27、ghtcapable insects. More precisely, these are the probabilities ofobtaining a test statistic that is less than or equal to the CVwhen the package claim is exactly met. Note that for aparticular CV, the probability of error declines with increasingsample size reflecting the fact that the precision of

28、 the sampleinformation increases as the number of samples increase. Theprobabilities of error were calculated using a normal distribu-tion model with a standard deviation of 18.5. This model wasfound to well describe counts of wasps caught in the flight testchamber.4Additional details are provided i

29、n the appendix.17. Interpretation of Results17.1 The quantity and quality of wasps in a shipment will beconsidered below the package claim when the test statistic issmaller than the selected critical value. If an acceptable errorrate is 0.05, then the CV for a sample size of 3 is 82 % (Table2). For

30、the example presented in Table 1, the test statistic(90 %) is larger than 82 %; therefore, the shipment would beclassified as meeting the package claim. If five samples wereused, the CV with an error rate of approximately 0.05 is 86 %(Table 2) so the shipment would again be classified as meetingthe

31、package claim. However, if ten samples were used, the CVfor an error rate of 0.05 is approximately 91 %, so now theshipment would be classified as not meeting the package claim.18. Precision and Bias18.1 The probabilities of error shown in Table 2 reflect theprecision of the test. There is no consis

32、tent bias in theassessment of quantity or flight ability of E. formosa.419. Keywords19.1 Encarsia formosa; greenhouse whitefly parasite; insectflight; insect quantity; natural enemy performanceAPPENDIX(Nonmandatory Information)X1. STATISTICAL ASSUMPTIONSX1.1 The test assumes that a shipment meets th

33、e require-ment that the number of wasps that will emerge and fly is atleast 100 % of the package claim. Hence the null hypothesis is:Ho: $100where is the scaled mean number of wasps in a shipmentthat are capable of flight. We wish to determine a critical value(CV) with which to compare a sample mean

34、 to so that theprobability of incorrectly declaring a shipment substandard isacceptable (for example, 0.05). This CV will depend on thenumber of samples taken from a shipment and will increase asthe number of samples increase. Thus, we seek to find a CVsuch that:Pr$x # CV ? $100% 5 0.05This is not p

35、ossible unless is fixed. Because this probabil-ity will decrease for a fixed value of CV and increasing valuesof , we can set to 100 and determine CV so that:Pr$x # CV ? 5 100% 5 0.05If sample counts (x) are distributed as normal randomvariables with known standard deviation, appropriate values ofCV

36、 can be determined using a normal cumulative distributionfunction.BIBLIOGRAPHY(1) van Lenteren, et al., “Guidelines for Quality Control of Commer-cially Produced Natural Enemies,” Quality Control and Productionof Biological Control Agents: Theory and Testing Procedures,J.C.van Lenteren, ed., CABI Pu

37、blishing, 2003, pp. 286 287.4Binns, M., Nyrop, J. P., and van der Werf, W., Sampling and Monitoring inCrop Protection: The Theoretical Basis for Designing Practical Decision Guides,CABI Publishing, London, 2000.E2199 0813ASTM International takes no position respecting the validity of any patent righ

38、ts asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any

39、time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments wil

40、l receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by AST

41、M International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 0814