IEEE 1610-2016 en Guide for the Application of Faulted Circuit Indicators on Distribution Circuits.pdf

《IEEE 1610-2016 en Guide for the Application of Faulted Circuit Indicators on Distribution Circuits.pdf》由会员分享，可在线阅读，更多相关《IEEE 1610-2016 en Guide for the Application of Faulted Circuit Indicators on Distribution Circuits.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits IEEE Std 1610-2016 (Revision of IEEE Std 1610-2007) IEEE Power and Energy Society Sponsored by the Insulated Conductors Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 1610-2016 (Revision of IEEE S

2、td 1610-2007) IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits Sponsor Insulated Conductors Committee of the IEEE Power and Energy Society Approved 7 December 2016 IEEE-SA Standards BoardAbstract: Information on what a faulted circuit indicator (FCI) is designed

3、to do, along with methods for selecting and applying FCIs for 200 / 600 A distribution circuits are described in this application guide. Keywords: fault circuit indicator, fault indicators, fault sensors, FCIs, IEEE 1610 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New

4、York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 22 May 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and qualit

5、y, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IE

6、EE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about th

7、rough developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owe

8、d by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropri- ate, seek the advice of a competent professional in determining the approp

9、riateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAU

10、SED AND ON ANY THEORY OF LIABILITY , WHETHER IN CON- TRACT, STRICT LIABILITY , OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FOR

11、ESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Off

12、icial statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal pos

13、ition of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments

14、for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertain- ing to IEEE Standards documents. Suggestions for changes in documents should be in the form of a pr

15、oposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concur- rence of a balance of interests. For this reason, IEEE and the members of its

16、 societies and Standards Coordi- nating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participat

17、e in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult a

18、ll applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory require- ments. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, b

19、y the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by

20、 IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adop-

21、tion by public authorities and private users, IEEE does not waive any rights in copyright to the documents.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual

22、 standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Ser- vice, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any in

23、dividual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended fro

24、m time to time through the issuance of amendments, corri- genda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten

25、 years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition o

26、f any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more inf

27、ormation about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ standards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html.

28、Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existe

29、nce or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Lette

30、rs of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrim- ination to applicants desiring to obtain such licens

31、es. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not re- sponsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether

32、any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the valid- ity of any patent rights, and the risk of infr

33、ingement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association6 Copyright 2017 IEEE. All rights reserved. Participants At the time this guide was completed, the Faulted Circuit Indicator Working Group had the following membershi

34、p: Francis Angerer, Chair Brieana Reed-Harmel, Vice Chair John Hans Harry Hayes Bruce Hoeppner Edward Jankowich Faris Jibril Eugene Weaver The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. John Ainscoug

35、h Saleman Alibhay Kraig Bader Thomas Barnes Earle Bascom III Martin Baur Kenneth Bow Robert Christman Kurt Clemente Gary Donner Donald Dunn Michael Dyer Michael Faulkenberry Randall Groves Ajit Gwal Je rey Hartenberger Je rey Helzer Lee Herron Werner Hoelzl Richard Jackson Song Jin Yuri Khersonsky J

36、im Kulchisky Pradeep Kumar Chung-Yiu Lam Benjamin Lanz Michael Lauxman William McBride John Merando Daleep Mohla Bruce Muschlitz Michael Newman Aaron Norris Lorraine Padden Christopher Petrola Charles Rogers Timothy Royster Daniel Sabin Steven Sano Bartien Sayogo Jeremy Smith Jerry Smith Nijam Uddin

37、 John Vergis Martin V on Herrmann Daniel Ward Eugene Weaver Lee Welch Carl Wentzel Kenneth White Alan Yerges When the IEEE-SA Standards Board approved this guide on 7 December 2016, it had the following membership: Jean-Philippe Faure, Chair Ted Burse, Vice Chair John D. Kulick, Past Chair Konstanti

38、nos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Stephen Dukes Jianbin Fan J. Travis Gri th Gary Ho man Ronald W. Hotchkiss Michael Janezic Joseph L. Koep nger* Hung Ling Kevin Lu Annette D. Reilly Gary Robinson Mehmet Ulema Yingli Wen Howard Wolfman Don Wright Yu Yuan Daidi Zhong *Member Em

39、eritus7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 1610-2016, IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits. This guide is intended as a supplement to the training in the use of high voltage electrical equi

40、pment, estab- lished safe operating procedures, and the manufacturers instructions for the application of faulted circuit indicators (FCIs). Installers and operators of FCIs require formal training in the use of high voltage electrical equipment. It is the users responsibility to establish safe operating procedures and to provide training. The manufacturers are required to provide installation and operating instructions for their products. This application guide is the product of close collaboration between representatives of both users and manu- facturers of FCIs.