IEC 62087-4-2015 Audio video and related equipment - Determination of power consumption - Part 4 Video recording equipment《音频 视频和相关设备 功耗的测定 第4部分 摄录器材》.pdf

《IEC 62087-4-2015 Audio video and related equipment - Determination of power consumption - Part 4 Video recording equipment《音频 视频和相关设备 功耗的测定 第4部分 摄录器材》.pdf》由会员分享，可在线阅读，更多相关《IEC 62087-4-2015 Audio video and related equipment - Determination of power consumption - Part 4 Video recording equipment《音频 视频和相关设备 功耗的测定 第4部分 摄录器材》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62087-4 Edition 1.0 2015-06 INTERNATIONAL STANDARD Audio, video and related equipment Determination of power consumption Part 4: Video recording equipment IEC 62087-4:2015-06(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. U

2、nless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you ha

3、ve any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-121

4、1 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content

5、 of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC

6、 International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technic

7、al committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electrope

8、dia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC

9、Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Se

10、rvice Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62087-4 Edition 1.0 2015-06 INTERNATIONAL STANDARD Audio, video and related equipment Determination of power consumption

11、Part 4: Video recording equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.160.10 ISBN 978-2-8322-2684-1 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 62087-4:201

12、5 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations . 6 3.1 Terms and definitions 6 3.2 Abbreviations 7 4 Specification of operating modes and functions . 7 4.1 General . 7 4.2 Auto power down function . 8 5 Measuring conditions

13、 for video recorders . 9 5.1 Input signal . 9 5.1.1 General . 9 5.1.2 RF test signal 9 5.1.3 Broadband input signal 9 5.2 Input terminals 9 5.2.1 Analogue terrestrial input terminal . 9 5.2.2 Cable television input terminal . 10 5.2.3 Digital terrestrial input terminal 10 5.2.4 Satellite input termi

14、nal . 10 5.3 Measurement procedure . 10 5.3.1 General measuring conditions . 10 5.3.2 Stabilization . 10 5.3.3 Environmental conditions . 10 5.3.4 Setup . 10 5.3.5 Power measurements 11 Bibliography 15 Figure 1 Auto power down function 14 Table 1 Operating modes and functions . 8 Table 2 Matrix for

15、multituner VRs . 12 IEC 62087-4:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ AUDIO, VIDEO AND RELATED EQUIPMENT DETERMINATION OF POWER CONSUMPTION Part 4: Video recording equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standard

16、ization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Intern

17、ational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate

18、in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between t

19、he two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications ha

20、ve the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any mis

21、interpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nati

22、onal or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services

23、carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National

24、 Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is dr

25、awn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall no

26、t be held responsible for identifying any or all such patent rights. International Standard IEC 62087-4 has been prepared by technical area 12: AV energy efficiency and smart grid applications, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This first edition of I

27、EC 62087-4 cancels and replaces Clause 7 of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-3 and IEC 62087-5 to IEC 62087-6 cancels and replaces IEC 62087:2011. This International Standard constitutes a technical revision. This edition includes significant technical changes wit

28、h respect to Clause 7 of IEC 62087:2011. The changes include fundamental and extensive revisions to cover video recorders such as DVD and BD types as well as recorders with removable solid state memory. Clause 7 has been revised in its entirety. 4 IEC 62087-4:2015 IEC 2015 The text of this standard

29、is based on the following documents: FDIS Report on voting 100/2469/FDIS 100/2499/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 62087 series, published under the general title Aud

30、io, video, and related equipment Determination of power consumption, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date in

31、dicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 62087-4:2015 I

32、EC 2015 5 INTRODUCTION This part of IEC 62087 specifies methods of measurement for the power consumption of video recording equipment for consumer use. IEC 62087:2011 revises methods for measuring power consumption of set top boxes mainly in the modes of On mode and Standby-active, high mode. These

33、modes correspond to the active modes which are defined in IEC 62542:2013. This standard has been divided into multiple parts. At the time of publication of this part, the following parts are planned or published: Part 1: General Part 2: Signals and media Part 3: Television sets Part 4: Video recordi

34、ng equipment Part 5: Set-top boxes (STB) Part 6: Audio equipment 6 IEC 62087-4:2015 IEC 2015 AUDIO, VIDEO AND RELATED EQUIPMENT DETERMINATION OF POWER CONSUMPTION Part 4: Video recording equipment 1 Scope This part of IEC 62087 specifies methods of measurement for the power consumption of video reco

35、rding equipment with removable media. It specifies the different modes of operation which are relevant for measuring power consumption. The methods of measurement are applicable only for equipment which can be connected to the mains. The measuring conditions in this standard represent the normal use

36、 of the equipment and may differ from specific conditions, as specified, for example, in safety standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the editio

37、n cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60107-1:1997, Methods of measurement on receivers for television broadcast trans- missions Part 1: General considerations Measurements at radio and video frequencies IEC 620

38、87-1:2015, Audio, video, and related equipment Methods of measurement for power consumption Part 1: General IEC 62216:2009, Digital terrestrial television receivers for the DVB-T system 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and

39、definitions given in IEC 62087-1:2015, as well as the following apply. 3.1.1 additional functions functions that are not required for the basic operation of the equipment 3.1.2 buffering temporary storage of video and audio streams in some form of memory in order to perform time shifting functions 3

40、.1.3 hard disk drive non removable media with a spinning disk for recording video and audio IEC 62087-4:2015 IEC 2015 7 3.1.4 removable media write-once or rewritable device to store audio, video or other data via a standardized read/write interface usable in all devices with the respective interfac

41、e Note 1 to entry: Examples include optical discs (DVD, BD), memory cards, video tape cassettes. 3.1.5 television set TV equipment for the reception and display of television broadcast and similar services for terrestrial, cable, satellite and broadband network transmission of analogue and/or digita

42、l signals Note 1 to entry: A television set may include additional functions that are not required for its basic operation. 3.1.6 time shifting capability of a device to allow playback type functions with real time broadcast Note 1 to entry: Such functions may include fast forward, review (rewind),

43、pause and slow motion. 3.1.7 video recording equipment equipment for the recording and reproduction of video and audio signals on a recording medium Note 1 to entry: Equipment with only playback function are included as well. Note 2 to entry: Examples are video cassette recorder (VCR) or a digital v

44、ersatile disc (DVD) player or recorder. 3.2 Abbreviations Prime BD Blu-ray Disc 1DVD Digital Versatile Disc EPG Electronic Program Guide IP Internet Protocol HD High Definition (720 p or better) LNB Low Noise Block converter PF Picture Failure point RF Radio Frequency SD Standard Definition TV TeleV

45、ision set VCR Video Cassette Recorder VR Video Recorder 4 Specification of operating modes and functions 4.1 General Table 1 contains the operating modes and functions for video recorders. _ 1Blu-ray Disc is a trade mark of the Blue-ray Disc Association. This information is given for the convenience

46、 of users of this document and does not constitute an endorsement by IEC of the product named. 8 IEC 62087-4:2015 IEC 2015 4.2 Auto power down function An auto power down feature may be implemented on a VR to power down into a Partial On mode after a predetermined time and possibly predetermined con

47、ditions. Such a feature should be referred to as auto power down. Table 1 Operating modes and functions Power Mode Sub-mode Function(s) Description 0 W Disconnected Disconnected Disconnect The equipment is disconnected from all external power sources. 0 W Off Off Off The equipment is connected to an

48、 external power source and provides no functions that depend on a power source. The equipment cannot be switched into any other mode with the remote control unit, or an external or internal signal. Note that some power may be consumed if an EMC filter or other components exist on the source side of

49、the power switch. 0 W Partial On Standby-passive Wake on remote control internal signal The equipment is connected to an external power source and does not provide its primary functions. The equipment can be switched into another mode with the remote control unit or an internal signal, but not with an external signal. Standby-active, low Wake on remote control internal signal external signal The equipment is connected to an external power source