IEC 61169-35-2011 Radio-frequency connectors - Part 35 Sectional specification for 2 92 series RF connectors《射频连接器.第35部分 2.92系列射频连接器分规范》.pdf

《IEC 61169-35-2011 Radio-frequency connectors - Part 35 Sectional specification for 2 92 series RF connectors《射频连接器.第35部分 2.92系列射频连接器分规范》.pdf》由会员分享，可在线阅读，更多相关《IEC 61169-35-2011 Radio-frequency connectors - Part 35 Sectional specification for 2 92 series RF connectors《射频连接器.第35部分 2.92系列射频连接器分规范》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61169-35 Edition 1.0 2011-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 35: Sectional specification for 2,92 series RF connectors Connecteurs pour frquences radiolectriques Partie 35: Spcification intermdiaire pour les connecteurs RF srie 2,92 IEC 61169-35:2011

2、colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, withou

3、t permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Commit

4、tee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la C

5、EI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Off

6、ice Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electroni

7、c and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchp

8、ub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publicati

9、ons. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equiv

10、alent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A

11、propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publicati

12、ons de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrent

13、s critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications

14、 parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les la

15、ngues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61169-35 Edition 1.0 2011-07 INTERNATI

16、ONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 35: Sectional specification for 2,92 series RF connectors Connecteurs pour frquences radiolectriques Partie 35: Spcification intermdiaire pour les connecteurs RF srie 2,92 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROT

17、ECHNIQUE INTERNATIONALE T ICS 33.120.30 PRICE CODE CODE PRIX ISBN 978-2-83220-666-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor

18、. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 61169-35 IEC:2011 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references . 6 3 Mating face and gauge information . 6 Dimensions High performance connectors Grade 1 . 6 3.1Connector wi

19、th pin-centre contact 6 3.1.1Connector with socket-centre contact 8 3.1.2Gauges . 9 3.2Gauge pins for socket-centre contact . 9 3.2.1Test procedure 9 3.2.2Dimensions standard test connectors Grade 0 . 10 3.3Connector with pin-centre contact 10 3.3.1Connector with socket-centre contact 11 3.3.2 4 Qua

20、lity assessment procedure 11 General . 11 4.1Rating and characteristics (see Clause 6 of IEC 61169-1) . 12 4.2Test schedule and inspection requirements Acceptance tests . 14 4.3Acceptance tests . 14 4.3.1Periodic tests 15 4.3.2Procedures 16 4.4Quality conformance inspection . 16 4.4.1Qualification a

21、pproval and its maintenance 16 4.4.2 5 Instructions for preparation of detail specifications . 17 General . 17 5.1Identification of the detail specification 17 5.2Identification of the component 17 5.3Performance 17 5.4Marking, ordering information and related matters . 18 5.5Selection of tests, tes

22、t conditions and severities 18 5.6Blank detail specification pro forma for 2,92 series connectors 19 5.7 Bibliography 24 Figure 1 Connector with pin-centre contact (for dimensions and notes, see Table 1) . 7 Figure 2 Connector with socket-centre contact (for dimensions and notes, see Table 2) 8 Figu

23、re 3 Gauge pins for socket-centre contact (for dimensions and notes, see Table 3) 9 Figure 4 Connector with pin-centre contact (for dimensions and notes, see Table 4) . 10 Figure 5 Connector with socket-centre contact (for dimensions and notes, see Table 5) 11 61169-35 IEC:2011 3 Table 1 Dimensions

24、of connector with pin-centre contact . 7 Table 2 Dimensions of connector with socket-centre contact 8 Table 3 Dimensions of gauge pins for socket-centre contact 9 Table 4 Dimensions of connector with pin-centre contact . 10 Table 5 Dimensions of connector with socket-centre contact 11 Table 6 Rating

25、 and characteristics . 12 Table 7 Acceptance tests . 14 Table 8 Periodic tests 15 4 61169-35 IEC:2011 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 35: Sectional specification for 2,92 series RF connectors FOREWORD 1) The International Electrotechnical Commission (IEC)

26、is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition t

27、o other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in

28、 the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with cond

29、itions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nat

30、ional Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the w

31、ay in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IE

32、C Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity.

33、IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of i

34、ts technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any ot

35、her IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be th

36、e subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-35 has been prepared by subcommittee 46F: RF and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F.

37、 and microwave passive components and accessories. This first edition cancels and replaces IEC/PAS 61169-35, published in 2009, of which it constitutes a minor revision. The only change is that the PAS has been changed into and International Standard. This bilingual version (2013-02) corresponds to

38、the monolingual English version, published in 2011-07. The text of this standard is based on the following documents: FDIS Report on voting 46F/191/FDIS 46F/196/RVD 61169-35 IEC:2011 5 Full information on the voting for the approval of this standard can be found in the report on voting indicated in

39、the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors can be found on the IEC website. The com

40、mittee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edi

41、tion, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 61169-35 IEC:2011 RADIO-FR

42、EQUENCY CONNECTORS Part 35: Sectional specification for 2,92 series RF connectors 1 Scope This sectional specification provides information and rules for preparation of detail specification of 2,92 series RF coaxial connectors together with the pro-forma blank detail specification. It also prescribe

43、s mating face dimensions for high performance connectors - grade 1, dimensional detail of standard test connectors - Grade 0, gauging information and tests selected from IEC 61169-1 applicable to all detail specifications relating to 2,92 series RF coaxial connectors. This specification indicates re

44、commended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. The 2,92 series coaxial connectors with characteristic impedance 50 , 2,92 mm inner diameter of outer conductor and screw

45、 coupling, are used for millimeter wave applications, connecting with RF cables or microstrips. The operating frequency limit is up to 40 GHz. Mating interface standards of the 2,92 series connectors are similar to IEEE std 287-2007 (2,92 mm) and MIL-std-348A (SMK). The 2,92 connectors can be inter-

46、mated with SMA, and 3,5 mm connectors as per following standards. SMA: IEC 61169-35, MIL-PRF-39012D and MIL-STD-348A. 3,5 mm: IEC 60169-23, IEEE std 287-2007. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only

47、the edition cited applies, For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods 1Amendment 1 (1996) Amendment 2 (1997) 3 Mating f

48、ace and gauge information Dimensions High performance connectors Grade 1 3.1Connector with pin-centre contact 3.1.1 Inch dimensions are original dimensions. All undimensioned pictorial configurations are for reference purpose only. _ 1There exists a consolidated edition 1.2 (1998) that comprises IEC

49、 61169-1:1992, its Amendment 1:1996 and its Amendment 2:1997. 61169-35 IEC:2011 7 1/4-36UNS-2B NOTE 1 d (NOTE2) NOTE 4 Detail A See detail A NOTE 3 NOTE 1 0,1 45 a b c f e g k l h j IEC 1393/11 Figure 1 Connector with pin-centre contact (for dimensions and notes, see Table 1) Table 1 Dimensions of connector with pin-centre contact Ref. mm in Min. Max. Min. Max. a 6,48 6,7