IEC 61000-2-13-2005 Electromagnetic compatibility (EMC) - Part 2-13 Environment - High-power electromagnetic (HPEM) environments radiated and conducted《电磁兼容性(EMC) 第2-13部分 环境.辐射和传导的大功率电磁(HEMP)环境》.pdf

《IEC 61000-2-13-2005 Electromagnetic compatibility (EMC) - Part 2-13 Environment - High-power electromagnetic (HPEM) environments radiated and conducted《电磁兼容性(EMC) 第2-13部分 环境.辐射和传导的大功率电磁(HEMP)环境》.pdf》由会员分享，可在线阅读，更多相关《IEC 61000-2-13-2005 Electromagnetic compatibility (EMC) - Part 2-13 Environment - High-power electromagnetic (HPEM) environments radiated and conducted《电磁兼容性(EMC) 第2-13部分 环境.辐射和传导的大功率电磁(HEMP)环境》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、 INTERNATIONAL STANDARD IEC 61000-2-13First edition 2005-03Electromagnetic compatibility (EMC) Part 2-13: Environment High-power electromagnetic (HPEM) environments Radiated and conducted Reference number IEC 61000-2-13:2005(E) BASIC EMC PUBLICATIONPublication numbering As from 1 January 1997 all IE

2、C publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publica

3、tion, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Info

4、rmation relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has pre

5、pared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, t

6、echnical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email

7、. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 INT

8、ERNATIONAL STANDARD IEC 61000-2-13First edition 2005-03Electromagnetic compatibility (EMC) Part 2-13: Environment High-power electromagnetic (HPEM) environments Radiated and conducted IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by

9、 any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailie

10、c.ch Web: www.iec.ch W For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission BASIC EMC PUBLICATION 2 61000-2-13 IEC:2005(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope 7 2 Normative references .8 3 Terms and definitions .8 4 G

11、eneral11 5 Description of radiated environments 13 6 Description of conducted HPEM environments 23 Annex A (informative) Four types of intentional electromagnetic environment interactions 27 Annex B (informative) Examples of low, medium and high-tech generators of HPEM .28 Annex C (informative) Exam

12、ples of typical HPEM waveforms (conducted and radiated).31 Annex D (informative) Determination of the bandwidth of typical HPEM waveforms .35 Bibliography .39 Figure 1 Several types of HPEM environments compared with the IEC HEMP waveform12 Figure 2 A damped sinusoidal waveform for hypoband and meso

13、band HPEM environments18 Figure 3 The spectral magnitude of the time waveform in Figure 2 19 Figure 4 Hyperband HPEM environment waveforms for variations in range in metres 21 Figure 5 Hyperband spectral magnitude of HPEM environments from Figure 4 21 Figure 6 Effective coupling length for a 1 m met

14、allic cable 22 Figure 7 Building used for HPEM conducted propagation experiments 24 Figure 8 Examples of briefcase generators for producing conducted environments: CW generator (left) and impulse generator (right) 15 .26 Figure B.1 Line schematic of a reflector type of an impulse radiating antenna (

15、IRA) 30 Figure C.1 Half-sinusoid at f o= 1 GHz .31 Figure C.2 Full sinusoid at f = 1 GHz32 Figure C.3 20 cycles of sinusoid at f = 1 GHz (N = 20)32 Figure C.4 Difference of exponential waveform.33 Figure C.5 Gaussian waveform 33 Figure C.6 Sinusoidal waveform with a Gaussian-amplitude modulation 34

16、Figure D.1 A waveform spectrum with a large dc content (e.g. the early-time HEMP from IEC 610002-9) 36 Figure D.2 A waveform with a multipeaked spectral magnitude in units of 1/Hz36 Figure D.3 Spectral magnitude of a damped sinusoidal waveform with a low Q and a bandratio value computed using the 3

17、dB frequency points 37 Figure D.4 Spectral magnitude of a damped sinusoidal waveform with a high Q and a bandratio value computed using the 3 dB frequency points 38 61000-2-13 IEC:2005(E) 3 Table 1 Definitions for bandwidth classification.14 Table 2 Range of radiated electric field at various freque

18、ncies and power levels .15 Table 3 Typical HPEM standard environments in the hypoband (or narrowband) and mesoband regimes .20 Table B.1 Radiated fields from a microwave oven magnetron fitted with different antennas 28 Table B.2 Radiated peak electric fields from a commercial HPEM generator29 Table

19、B.3 Examples of reflector types of impulse radiating antennas.30 4 61000-2-13 IEC:2005(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROMAGNETIC COMPATIBILITY (EMC) Part 2-13: Environment High-power electromagnetic (HPEM) environments Radiated and conducted FOREWORD 1) The International Electro

20、technical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To

21、 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Natio

22、nal Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (I

23、SO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation

24、from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be

25、 held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. An

26、y divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Public

27、ation. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, prope

28、rty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in t

29、his publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any

30、or all such patent rights. International Standard IEC 61000-2-13 has been prepared by subcommittee 77C: High power transient phenomena, of IEC technical committee 77: Electromagnetic compatibility. It has the status of a basic EMC publication in accordance with IEC Guide 107. The text of this standa

31、rd is based on the following documents: FDIS Report on voting 77C/153/FDIS 77C/155/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part

32、 2. 61000-2-13 IEC:2005(E) 5 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reco

33、nfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 61000-2-13 IEC:2005(E) INTRODUCTION IEC 61000 is published in separate parts according to the following structure: Part 1: General General considerations (introduct

34、ion, fundamental principles) Definitions, terminology Part 2: Environment Description of the environment Classification of the environment Compatibility levels Part 3: Limits Emission limits Immunity limits (in so far as they do not fall under the responsibility of the product committees) Part 4: Te

35、sting and measurement techniques Measurement techniques Testing techniques Part 5: Installation and mitigation guidelines Installation guidelines Mitigation methods and devices Part 6: Generic standards Part 9: Miscellaneous Each part is further subdivided into several parts, published either as Int

36、ernational Standards or as technical specifications or technical reports, some of which have already been published as sections. Others will be published with the part number followed by a dash and a second number identifying the subdivision (example: 61000-6-1). 61000-2-13 IEC:2005(E) 7 ELECTROMAGN

37、ETIC COMPATIBILITY (EMC) Part 2-13: Environment High-power electromagnetic (HPEM) environments Radiated and conducted 1 Scope This part of IEC 61000 defines a set of typical radiated and conducted HPEM environment waveforms that may be encountered in civil facilities. Such threat environments can pr

38、oduce damaging effects on electrical and electronic equipment in the civilian sector, as described in IEC 61000-1-5. It is necessary to define the radiated and conducted environments, in order to develop protection methods. For the purposes of this standard, high-power conditions are achieved when t

39、he peak electric field exceeds 100 V/m, corresponding to a plane-wave free-space power density of 26,5 W/m 2 . This criterion is intended to define the application of this standard to EM radiated and conducted environments that are substantially higher than those considered for “normal“ EMC applicat

40、ions, which are covered by the standards produced by IEC SC 77B. The HPEM environment can be: radiated or conducted; a single pulse envelope with many cycles of a single frequency (an intense narrowband signal that may have some frequency agility and the pulse envelope may be modulated); a burst con

41、taining many pulses, with each pulse envelope containing many cycles of a single frequency; an ultrawideband transient pulse (spectral content from tens of MHz to several GHz); a burst of many ultrawideband transient pulses. The HPEM signal could be from sources such as radar or other transmitters i

42、n the vicinity of an installation or from an intentional generator system targeting a civilian facility. Radiated signals can also induce conducted voltages and currents through the coupling process. In addition, conducted HPEM environments may also be directly injected into the wiring of an install

43、ation. There is a critical distinction between the HEMP (high-altitude electromagnetic pulse) environment and the HPEM environment, in terms of the range or the distance of the affected electrical or electronic components from the source. In the context of HEMP, the range is immaterial, as the HEMP

44、environment propagates downward from space to the earths surface and is therefore relatively uniform over distances of 1 000 km. On the other hand, in the HPEM context the environment and its effects decrease strongly with range. In addition, the HEMP waveshape is a series of time domain pulses whil

45、e the HPEM environment may have a wide variety of waveshapes. Consequently, the standardization process for HPEM environments is more difficult. The recommended approach is to investigate the various types of HPEM environments that have been produced to date and are likely to be feasible in the near

46、 future, and then to develop suitable HPEM standard waveforms from such a study. Such HPEM environment standard waveforms can be amended in due course, depending on emerging technologies that make it possible to produce them. 8 61000-2-13 IEC:2005(E) 2 Normative references The following referenced d

47、ocuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-161, International Electrotechnical Vocabulary (IEV) Chapter 161:

48、 Electro- magnetic compatibility IEC 61000-1-5, Electromagnetic compatibility (EMC) Part 1-5: General High power electromagnetic (HPEM) effects on civil systems IEC 61000-2-9, Electromagnetic compatibility (EMC) Part 2: Environment Section 9: Description of HEMP environment Radiated disturbance IEC

49、61000-2-10, Electromagnetic compatibility (EMC) Part 2-10: Environment Description of HEMP environment Conducted disturbance IEC 61000-2-11, Electromagnetic compatibility (EMC) Part 2-11: Environment Classification of HEMP environments IEC 61000-4-3, Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electrom