UL 1713-2001 UL Standard for Safety Pressure Pipe and Couplings Glass Fiber-Reinforced for Underground Fire Service《地下消防设备用玻璃纤维增强压力管道和管联接器》.pdf

《UL 1713-2001 UL Standard for Safety Pressure Pipe and Couplings Glass Fiber-Reinforced for Underground Fire Service《地下消防设备用玻璃纤维增强压力管道和管联接器》.pdf》由会员分享，可在线阅读，更多相关《UL 1713-2001 UL Standard for Safety Pressure Pipe and Couplings Glass Fiber-Reinforced for Underground Fire Service《地下消防设备用玻璃纤维增强压力管道和管联接器》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、UL 1713ISBN 0-7629-0674-XPressure Pipe and Couplings,Glass Fiber-Reinforced, forUnderground Fire ServiceUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Pressure Pipe and Couplings, Glass Fiber-Reinforced, for Underground FireService, UL 1713Th

2、ird Edition, Dated May 24, 2001The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this St

3、andard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights

4、 regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission

5、of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied

6、warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, e

7、ven if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of

8、 its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs suppo

9、rt policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Stan

10、dards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on the purchasers compute

11、r system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standard may only be access

12、ed by one userat a time and for which there is no possibility of multiple concurrent access.MAY 24, 2001 UL 1713 tr1If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user c

13、omputer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed

14、from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the

15、 printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard a

16、re now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective dateare located af

17、ter the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specific

18、ally requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing and Follow-Up Services after the effectivedate, and

19、understanding of this should be signified in writing.Copyright 2001 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-14.May24,2001MAY 24, 2001 UL 1713tr2MAY 24, 20011UL 1713Standard for Pressure Pipe and Couplings, Glass Fiber-Reinfor

20、ced, forUnderground Fire ServiceThe First printing was numbered UL 1285A.First Edition January, 1982Second Edition March, 1995Third EditionMay 24, 2001An effective date included as a note immediately following certain requirementsis one established by Underwriters Laboratories Inc.Revisions of this

21、Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themost recently adopted revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised requirements.ISBN 0-7629-0674-XC

22、OPYRIGHT 1982, 2001 UNDERWRITERS LABORATORIES INC.MAY 24, 2001UL 17132No Text on This PageCONTENTSFOREWORD 4INTRODUCTION1 Scope .52 Units of Measurement .53 Undated Reference .54 Glossary .6CONSTRUCTION5 Materials .76 Pipe Joints .77 Sealing Gaskets 7PERFORMANCE8 General 79 Elastomeric Parts Tests 7

23、10 Hydrostatic Pressure Test .811 Leakage Test for Joints .812 Assembly Test .913 Stiffness Test 914 Long-Term Hydrostatic-Pressure Test .1015 Exposure Tests .1115.1 General .1115.2 Test method .1115.3 Test solutions 1115.4 Air oven aging .1215.5 Light and water exposure .12MANUFACTURING AND PRODUCT

24、ION TESTS16 General 1217 Production-Line Hydrostatic-Pressure Tests 12MARKING18 General 1319 Pipe .1320 Couplings 1321 Rubber Gaskets 14MAY 24, 2001 UL 1713 3FOREWORDA. This Standard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL)under its Follow-Up Service fo

25、r this category within the limitations given below and in the Scope sectionof this Standard. These requirements are based upon sound engineering principles, research, records oftests and field experience, and an appreciation of the problems of manufacture, installation, and usederived from consultat

26、ion with and information obtained from manufacturers, users, inspection authorities,and others having specialized experience. They are subject to revision as further experience andinvestigation may show is necessary or desirable.B. The observance of the requirements of this Standard by a manufacture

27、r is one of the conditions of thecontinued coverage of the manufacturers product.C. A product which complies with the text of this Standard will not necessarily be judged to comply withthe Standard if, when examined and tested, it is found to have other features which impair the level ofsafety conte

28、mplated by these requirements.D. A product employing materials or having forms of construction which conflict with specific requirementsof the Standard cannot be judged to comply with the Standard. A product employing materials or havingforms of construction not addressed by this Standard may be exa

29、mined and tested according to the intentof the requirements and, if found to meet the intent of this Standard, may be judged to comply with theStandard.E. UL, in performing its functions in accordance with its objectives, does not assume or undertake todischarge any responsibility of the manufacture

30、r or any other party. The opinions and findings of ULrepresent its professional judgment given with due consideration to the necessary limitations of practicaloperation and state of the art at the time the Standard is processed. UL shall not be responsible to anyonefor the use of or reliance upon th

31、is Standard by anyone. UL shall not incur any obligation or liability fordamages, including consequential damages, arising out of or in connection with the use, interpretation of,or reliance upon this Standard.F. Many tests required by the Standards of UL are inherently hazardous and adequate safegu

32、ards forpersonnel and property shall be employed in conducting such tests.MAY 24, 2001UL 17134INTRODUCTION1 Scope1.1 These requirements cover glass-fiber-reinforced, thermosetting-resin pipe (RTRP) andglass-fiber-reinforced, plastic-mortar pipe (RPMP), and their couplings. The pipe is for use in und

33、ergroundfire service systems and connections to such systems.1.2 Pipe covered by these requirements is designated as Class 100, 150, 200, 250, or greater for ratedworking pressures of 100, 150, 200, 250 psig (0.69, 1.03, 1.38, and 1.72 MPa), or higher, respectively,and has a nominal inside diameter

34、of 4 to 60 inches.1.3 Requirements for the installation and use of RTRP and RPMP pressure pipe and couplings arespecified in the Standard for the Installation of Private Fire Service Mains and their Appurtenances,ANSI/NFPA No. 24, and the Standard Practice for Underground Installation of “Fiberglass

35、”(Glass-Fiber-Reinforced Thermosetting-Resin Pipe), ASTM D3839.1.4 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire or of electric shockor injury to persons s

36、hall be evaluated using appropriate additional component and end-productrequirements to maintain the level of safety as originally anticipated by the intent of this standard. Aproduct whose features, characteristics, components, materials, or systems conflict with specificrequirements or provisions

37、of this standard does not comply with this standard. Revision of requirementsshall be proposed and adopted in conformance with the methods employed for development, revision, andimplementation of this standard.2 Units of Measurement2.1 Values stated without parentheses are the requirement. Values in

38、 parentheses are explanatory orapproximate information.3 Undated Reference3.1 Any undated reference to a code or standard appearing in the requirements of this standard shall beinterpreted as referring to the latest edition of that code or standard.MAY 24, 2001 UL 1713 54 Glossary4.1 For the purpose

39、 of this standard, the following definitions apply.4.2 EPOXY RESIN (THERMOSETTING) A polymer containing two or more three-membered ringsconsisting of one oxygen and two carbon atoms, which is cured by cross-linking with an amine oranhydride hardener with or without heat, catalyst, or both.4.3 GLASS

40、FIBERS (STRUCTURAL WALL) A commercial grade of E glass filaments the binder andsizing of which is compatible with the impregnating resin.4.4 LINER A filled or unfilled thermoplastic- or thermosetting-resin layer, nonreinforced or reinforced,forming the interior surface of the pipe.4.5 PRESSURE CLASS

41、 The working pressure of a specified pipe for water service at a specifiedmaximum operating temperature.4.6 POLYESTER RESIN (THERMOSETTING) A polymer with two or more ester groups andcontaining ethylenic unsaturation, dissolved in a reactive diluent with vinyl unsaturation, that is cured bycross-lin

42、king by means of a free-radical initiated curing mechanism, such as peroxide catalyst and heat.4.7 RPMP A tubular product containing glass-fiber reinforcement and aggregate embedded in orsurrounded by cured, thermosetting epoxy or polyester resin. The composite structure may containgranular or plate

43、let fillers, thixotropes, pigments, or dyes. Liner and coating materials includethermoplastic or thermosetting resins.4.8 RTRP A tubular product containing glass-fiber reinforcement embedded in or surrounded bycured, thermosetting epoxy or polyester resin. The composite structure may contain thixotr

44、opes,pigments, or dyes, while it does not include granular or platelet fillers. Liner and coating materialsinclude thermoplastic or thermosetting resins.4.9 RESIN Any of a class of solid or pseudosolid organic materials, often of high molecular weight,with no definite melting point. The term is used

45、 to designate any polymer that is a basic material forplastics.4.10 THERMOPLASTIC RESIN A plastic that is repeatedly softened by heating and hardened bycooling and that in the softened state is fuseible or shaped by flow.4.11 THERMOSETTING RESIN A plastic that, after having been cured by heat or oth

46、er means, issubstantially infusible and insoluble.MAY 24, 2001UL 17136CONSTRUCTION5 Materials5.1 Grade E glass, as specified in the Standard Specification for Glass Fiber Strands, ASTM D578, shallbe used as the glass-fiber reinforcement material in the structural wall of RTRP and RPMP pipe andcoupli

47、ngs.6 Pipe Joints6.1 A joint shall be of the gasketed bell-and-spigot type, adhesive-bonded type, or mechanical type. See6.2 and 15.1.1.6.2 A mechanical joint is not prohibited from being flanged, threaded, compression couplings, orproprietary joints.7 Sealing Gaskets7.1 A sealing gasket shall be ma

48、de of a vulcanized natural rubber or a synthetic-rubber compound andshall have uniform dimensions and sufficient thickness to provide a compression seal. See ElastomericParts Test, Section 9.PERFORMANCE8 General8.1 Representative samples of each class and size of pipe and couplings shall be subjecte

49、d to the testsspecified in Sections915.9 Elastomeric Parts Tests9.1 An elastomeric part used to provide a seal shall have the following properties when tested asspecified in the Standard for Gaskets and Seals, UL 157:a) Minimum tensile strength 2000 pounds per square inch (psi) (13.8 MPa).b) Minimum ultimate elongation 300 percent 1 to 4 inches (25.4 to 102 mm).c) Permanent set of 3/16 inch (4.8 mm) when 1 inch (25.4 mm) marks are stretched to 3inches (76.2 mm), held for 2 minutes and measured 2 minutes after release.d) Those properties relat