TIA-942-A-2014 Telecommunications Infrastructure Standard for Data Centers.pdf

《TIA-942-A-2014 Telecommunications Infrastructure Standard for Data Centers.pdf》由会员分享，可在线阅读，更多相关《TIA-942-A-2014 Telecommunications Infrastructure Standard for Data Centers.pdf（120页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-942-A (Revision of TIA-942) March 2014Telecommunications Infrastructure Standard for Data Centers ANSI/TIA-942-A-2012 APPROVED: AUGUST 2, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers

2、and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-me

3、mber of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA

4、in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety p

5、roblems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document ar

6、e for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. 3-0092-RV1-C-2, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.1 Subcommittee on Commercial Building Tele

7、communications Cabling (568, 942, 862, 1179). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed

8、in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR

9、consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the sco

10、pe or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant

11、or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, developm

12、ent or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search

13、or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (ii

14、i) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify

15、, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPRO

16、PRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE

17、 WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING T

18、O ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING N

19、EGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-942-A i Telecommunications

20、 Infrastructure Standard for Data Centers Table of Contents FOREWORD . VII 1 SCOPE 1 2 NORMATIVE REFERENCES 1 3 DEFINITION OF TERMS, ACRONYMS AND ABBREVIATIONS, AND UNITS OF MEASURE . 2 3.1 General . 2 3.2 Definition of terms 2 3.3 Acronyms and abbreviations 6 3.4 Units of measure . 7 4 DATA CENTER

21、DESIGN OVERVIEW 9 4.1 General . 9 4.2 Relationship of data center spaces to other building spaces . 9 4.3 Availability and Security 10 4.4 Consideration for involvement of professionals . 11 5 DATA CENTER CABLING SYSTEM INFRASTRUCTURE . 12 6 DATA CENTER TELECOMMUNICATIONS SPACES AND RELATED TOPOLOGI

22、ES . 15 6.1 General . 15 6.2 Data center structure . 15 6.2.1 Major elements . 15 6.2.2 Basic data center topology . 16 6.2.3 Reduced data center topologies 17 6.2.4 Distributed data center topologies . 17 6.3 Energy efficient design . 18 6.3.1 General . 18 6.3.2 Energy efficiency recommendations .

23、19 6.3.2.1 General . 19 6.3.2.2 Telecommunications cabling 19 6.3.2.3 Telecommunications pathways 20 6.3.2.4 Telecommunications spaces . 20 6.4 Computer room requirements . 21 6.4.1 General . 21 6.4.2 Location 22 6.4.3 Access . 22 6.4.4 Architectural design . 22 6.4.4.1 Size . 22 6.4.4.2 Guidelines

24、for other equipment 22 6.4.4.3 Ceiling height . 22 6.4.4.4 Lighting 22 6.4.4.5 Doors 23 6.4.4.6 Floor loading 23 6.4.4.7 Uninterruptable power notification 23 6.4.4.8 Signage . 23 ANSI/TIA-942-A ii 6.4.4.9 Seismic considerations . 23 6.4.5 Environmental design . 24 6.4.5.1 Contaminants . 24 6.4.5.2

25、HVAC 24 6.4.5.2.1 Operational parameters . 24 6.4.5.2.2 Continuous operation 24 6.4.5.2.3 Standby operation . 24 6.4.5.3 Radio sources . 24 6.4.5.4 Batteries . 24 6.4.5.5 Vibration 24 6.4.6 Electrical design . 24 6.4.6.1 Power . 24 6.4.6.2 Standby power 25 6.4.6.3 Bonding and grounding (earthing) .

26、25 6.4.7 Fire protection 25 6.4.8 Water infiltration 25 6.5 Entrance room requirements . 25 6.5.1 General . 25 6.5.2 Location 25 6.5.3 Quantity 26 6.5.4 Entrance conduit routing under access floor 26 6.5.5 Access provider and service provider spaces . 26 6.5.6 Building entrance terminal . 26 6.5.7 A

27、rchitectural design . 26 6.5.7.1 General . 26 6.5.7.2 Size . 26 6.5.7.3 Plywood backboards 27 6.5.7.4 Ceiling height . 27 6.5.7.5 Lighting 27 6.5.7.6 Doors 27 6.5.7.7 Signage . 27 6.5.7.8 Seismic considerations . 27 6.5.7.9 Environmental design . 27 6.5.7.10 Electrical design . 27 6.5.8 Fire protect

28、ion 28 6.5.9 Water infiltration 28 6.6 Main distribution area . 28 6.6.1 General . 28 6.6.2 Location 28 6.6.3 Facility requirements 28 6.7 Intermediate distribution area . 28 6.7.1 General . 28 6.7.2 Location 28 6.7.3 Facility requirements 29 6.8 Horizontal distribution area 29 6.8.1 General . 29 6.

29、8.2 Location 29 6.8.3 Facility requirements 29 6.9 Zone distribution area . 29 6.10 Equipment distribution areas 29 6.11 Telecommunications room . 30 6.12 Data center support areas 30 6.13 Cabinets and racks 30 6.13.1 General . 30 6.13.2 “Hot“ and “cold“ aisles . 30 6.13.3 Placement relative to floo

30、r tile grid 31 6.13.4 Access floor tile cuts . 31 6.13.5 Installation of racks on access floors . 31 ANSI/TIA-942-A iii 6.13.6 Racks and cabinets in entrance room, MDAs, IDAs and HDAs . 32 7 DATA CENTER CABLING SYSTEMS . 33 7.1 General . 33 7.2 Choosing media 33 7.3 Horizontal Cabling . 33 7.3.1 Gen

31、eral . 33 7.3.2 Topology . 34 7.3.3 Horizontal cabling length . 34 7.3.4 Recognized media . 34 7.3.5 Optical fiber connectors . 35 7.3.6 Coaxial cable connectors . 35 7.4 Backbone cabling . 35 7.4.1 General . 35 7.4.2 Topology . 35 7.4.2.1 Star topology 35 7.4.2.2 Accommodation of non-star configura

32、tions . 36 7.4.3 Redundant cabling topologies 36 7.4.4 Recognized media . 37 7.4.5 Optical fiber connectors . 37 7.4.6 Coaxial cable connectors . 37 7.4.7 Backbone cabling lengths . 37 7.5 Centralized optical fiber cabling . 37 7.5.1 General . 37 7.5.2 Implementation . 37 7.6 Cabling transmission pe

33、rformance and test requirements 38 7.6.1 General . 38 7.6.2 Additional requirements for field testing of 75-ohm coaxial cabling . 38 8 DATA CENTER CABLING PATHWAYS 39 8.1 General . 39 8.2 Security for data center cabling 39 8.3 Separation of power and telecommunications cables . 39 8.3.1 Separation

34、between power or lighting and balanced twisted-pair cables 39 8.3.2 Practices to accommodate power separation requirements . 39 8.3.3 Separation of fiber and balanced twisted-pair cabling 40 8.4 Telecommunications entrance pathways 40 8.4.1 Entrance pathway types 40 8.4.2 Diversity . 40 8.4.3 Sizing

35、 40 8.5 Access floor systems 41 8.5.1 General . 41 8.5.2 Cable trays for telecommunications cabling 41 8.5.3 Access floor performance requirements . 41 8.5.4 Floor tile cut edging . 41 8.5.5 Cable types under access floors . 42 8.6 Overhead cable trays 42 8.6.1 General . 42 8.6.2 Cable tray support

36、42 8.6.3 Coordination of cable tray routes . 42 9 DATA CENTER REDUNDANCY 44 9.1 Introduction 44 9.2 Redundant maintenance holes and entrance pathways . 45 9.3 Redundant access provider services . 45 9.4 Redundant entrance room . 45 ANSI/TIA-942-A iv 9.5 Redundant main distribution area . 45 9.6 Redu

37、ndant backbone cabling 46 9.7 Redundant horizontal cabling . 46 ANNEX A (INFORMATIVE) CABLING DESIGN CONSIDERATIONS 47 A.1 Application cabling lengths 47 A.1.1 T-1, E-1, T-3 and E-3 circuit lengths 47 A.1.2 Baluns E-3 and T-3 circuits 49 A.1.3 TIA-232 and TIA-561 console connections . 50 A.2 Cross-c

38、onnections . 51 A.3 Separation of functions in the main distribution area . 51 A.3.1 Twisted-pair main cross-connect 51 A.3.2 Coaxial main cross-connect . 51 A.3.3 Optical fiber main cross-connect 51 A.4 Separation of functions in the horizontal distribution area . 52 A.5 Cabling to end equipment .

39、52 A.6 Fiber design consideration 52 A.7 Balanced twisted-pair design consideration . 52 ANNEX B (INFORMATIVE) ACCESS PROVIDER INFORMATION . 53 B.1 Access provider coordination . 53 B.1.1 General . 53 B.1.2 Information to provide to access providers 53 B.1.3 Information that the access providers sho

40、uld provide 53 B.2 Access provider demarcation in the entrance room 54 B.2.1 Organization . 54 B.2.2 Demarcation of low-speed circuits . 54 B.2.3 Demarcation of T-1 circuits 57 B.2.4 Demarcation of E-3 advisory requirements are designated by the words “should”, “may”, or “desirable”, which are used

41、interchangeably in this Standard. Mandatory criteria generally apply to protection, performance, administration and compatibility; they specify the absolute minimum acceptable requirements. Advisory or desirable criteria are presented when their attainment will enhance the general performance of the

42、 cabling system in all its contemplated applications. A note in the text, table, or figure is used for emphasis or for offering informative suggestions. Metric equivalents of US customary units The dimensions in this Standard are metric or US customary with soft conversion to the other. Life of this

43、 Standard This Standard is a living document. The criteria contained in this Standard are subject to revisions and updating as warranted by advances in building construction techniques and telecommunications technology. ANSI/TIA-942-A 1 1 SCOPE This Standard specifies the minimum requirements for te

44、lecommunications infrastructure of data centers and computer rooms, including single tenant enterprise data centers and multi-tenant Internet hosting data centers. The topology specified in this document is intended to be applicable to any size data center. 2 NORMATIVE REFERENCES The following stand

45、ard contains provisions that, through references in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility

46、of applying the most recent editions of the standards published by them. a) ANSI/TIA-568-C.0, Generic Telecommunications Cabling for Customer Premises b) ANSI/TIA-568-C.1, Commercial Building Telecommunications Cabling Standard c) ANSI/TIA-568-C.2, Balanced Twisted-Pair Telecommunications Cabling an

47、d Components Standard d) ANSI/TIA-568-C.3, Optical Fiber Cabling Components Standard e) ANSI/TIA-569-C, Telecommunications Pathways and Spaces f) ANSI/TIA-604.5-D, FOCIS 5 Fiber Optic Connector Intermateability Standard, Type MPO g) ANSI/TIA/EIA-604-10-A, FOCIS 10 Fiber Optic Connector Intermateabil

48、ity Standard, Type LC h) ANSI/TIA-606-B, Administration Standard for Telecommunications Infrastructure i) ANSI/TIA-607-B, Telecommunications Bonding and Grounding (Earthing) for Customer Premises j) ANSI/TIA-758-B, Customer-Owned Outside Plant Telecommunications Infrastructure Standard k) ANSI/NFPA

49、70-2011, National Electrical Code l) ANSI/NFPA 75-2009, Standard for the Protection of Information Technology Equipment m) ANSI/ATIS-0600404.2002(R2006), Network and Customer Installation Interfaces DS3 and Metallic Interface Specification n) ASHRAE, Guidelines for Data Processing Environments, Second Edition, 2009 o) ASHRAE 2011 Thermal Guidelines for Data Processing Environments Expanded Data Center Classes and Usage Guidance, 2011 p) OSHA CFR 1926.441, Battery Rooms and Battery Charging q) Telcordia GR-63-CORE, NEBS(TM) Requirements: Physical Protection r) Telcordia GR-139-CO