SANS 1118-3-2008 School clothing Part 3 Trousers and shorts《校服 第3部分 长裤和短裤》.pdf

《SANS 1118-3-2008 School clothing Part 3 Trousers and shorts《校服 第3部分 长裤和短裤》.pdf》由会员分享，可在线阅读，更多相关《SANS 1118-3-2008 School clothing Part 3 Trousers and shorts《校服 第3部分 长裤和短裤》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21147-9 SANS 1118-3:2008Edition 3.3Any reference to SABS 1118-3 is deemedto be a reference to this standard(Government Notice No. 1373 of

4、8 November 2002)SOUTH AFRICAN NATIONAL STANDARD School clothing Part 3: Trousers and shorts Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 1118

5、-3:2008 Edition 3.3 Table of changes Change No. Date Scope 1 2000 Amended to delete a reference and to align this part of SABS 1118 with the latest edition of SABS 1118-1, to include the age of the wearer (in the case of smaller sizes) and the size of the wearer (in the case of older wearers), in th

6、e size designations, and to make provision for three different fits for both younger and older wearers. 2 2001 Amended to accommodate the age of the wearer (on sizes to fit wearers up to twelve) as well as the Imperial sizes (for sizes to fit wearers older than twelve years) under the definition for

7、 Asize designation. 3 2008 Amended to change the designation of SABS standards to SANS standards, and to replace tables 1a) and 1b) with a new size chart. Foreword This South African standard was approved by National Committee StanSA SC 5110.05B, Clothing and made-up articles School clothing, in acc

8、ordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in February 2008. This document supersedes SABS 1118-3:2001 (edition 3.2). A vertical line in the margin shows where the text has been technically modified by amendment

9、 No. 3. Annex A forms an integral part of this document. SANS 1118 consists of the following parts under the general title School clothing: Part 1: General requirements for school clothing. Part 2: Blazers. Part 3: Trousers and shorts. Part 4: Shirts. Part 5: Deleted by amendment No. 1. Part 6: Dres

10、ses, tunics and gyms. Part 7: Girls slacks and skirts. Part 9: Knee-high stockings and ankle socks. Part 10: Jerseys and cardigans. Part 11: Briefs. Part 12: Tracksuits. Part 13: Athletic wear. SANS 1118-3:2008 Edition 3.3 1 Contents Page Foreword 1 Scope . 3 2 Normative references . 3 3 Definitions

11、 3 4 Materials . 3 5 Style, size and make 4 6 Packing, care-labelling and marking 6 7 Inspection . 6 Annex A (normative) Notes to purchasers 7 SANS 1118-3:2008 Edition 3.3 2 This page is intentionally left blank SANS 1118-3:2008 Edition 3.3 3 School clothing Part 3: Trousers and shorts 1 Scope This

12、part of SANS 1118 specifies the materials, cut, make and trim of boys trousers and shorts. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of SANS 1118. All standards are subject to revision and, since any re

13、ference to a standard is deemed to be a reference to the latest edition of that standard, parties to agreements based on this part of SANS 1118 are encouraged to take steps to ensure the use of the most recent editions of the standards indicated below. Information on currently valid national and int

14、ernational standards can be obtained from Standards South Africa. SANS 1118-1, School clothing Part 1: General requirements for school clothing. SANS 10101 (SABS 0101), Standard nomenclature for stitches, seams and stitchings. 3 Definitions For the purposes of this part of SANS 1118, the definitions

15、 given in SANS 1118-1 and the following definition apply. size designation the age (for sizes to fit intended wearers up to twelve years), or the Imperial size (for sizes to fit intended wearers older than twelve years) as well as the numerical value, in centimetres, of the waist girth of the intend

16、ed wearer. Amdt 2 4 Materials 4.1 Outer material The outer material shall be of the required fabric that complies with the relevant requirements given in table 1 of SANS 1118-1. (The note to 4.1 of SANS 1118-1 shall also apply.) The colour(s) of the dyed fabric shall be an acceptable match to the re

17、quired colour(s) as agreed upon between the purchaser and the supplier. Amdt 1 SANS 1118-3:2008 Edition 3.3 4 4.2 Supplementary materials and components The supplementary materials and components shall comply with the relevant requirements laid down in 4.2 of SANS 1118-1. Amdt 1 5 Style, size and ma

18、ke 5.1 Style The trousers or shorts shall have two side pockets and one hip pocket, and may have a fob pocket, if required. The waistband shall have belt-loops or shall be elasticized, the bottoms shall be plain or shall have permanent turn-ups, all as required. The fly shall be slide-fastening. 5.2

19、 Size The trousers and shorts shall be supplied in one (or more) of the size designations given in column 1 of table 1, as required. Measurements of shorts, determined in accordance with 4.3.4 of SANS 1118-1, shall conform to the appropriate values given in column 2 of table 1. Amdt 1; amdt 3 Measur

20、ements of trousers, determined in accordance with 4.3.4 of SANS 1118-1, shall conform to the appropriate values given in columns 3, 4 and 5 of table 1. Amdt 3 SANS 1118-3:2008 Edition 3.3 5 Table 1 Size range for trousers and shorts (based on size and waist) Dimensions in centimetres 1 2 3 4 5 Finis

21、hed garment measurement Inside leg length (trousers only) Size designation1)Waist Regular regular fit Loose fit Regular long fit Age 4 To fit waist 54 56 43,5 43,5 44 Age 5-6 To fit waist 56 58 46 46 46,5 Age 6-7 To fit waist 58 60 52 52 52,5 Age 7-8 To fit waist 61 63 57,5 57,5 58 Age 8-9 To fit wa

22、ist 63 65 61,5 61,5 62 Age 9-10 To fit waist 65 67 66 66 66,5 Age 11 To fit waist 67 69 69,5 69,5 70 Age 12 To fit waist 68 70 73,5 73,5 74 28 To fit waist 71 73 78,5 73,5 79,5 30 To fit waist 76 78 82 82 83 32 To fit waist 81 83 84 84 85 34 To fit waist 87 89 85 85 86 36 To fit waist 92 94 85 85 86

23、 38 To fit waist 97 99 85 85 86 40 To fit waist 102 104 85 85 86 1) Based on the age and the waist measurements of the intended wearer. Amdt 1; amdt 3 5.3 Make 5.3.1 General The relevant requirements for garments given in 4.3 of SANS 1118-1 shall apply. Amdt 1 5.3.2 Waistband 5.3.2.1 Belt-loops A wa

24、istband with belt-loops shall have at least six belt-loops in the case of size designations 54 to 76 (inclusive) and eight belt-loops in other cases, shall be lined with an acceptable ready-made SANS 1118-3:2008 Edition 3.3 6 band lining, and shall fasten at the top of the fly with a hook and bar (s

25、ee 4.2.6 of SANS 1118-1) or other acceptable fastening. Amdt 1 5.3.2.2 Elasticized waistband An elasticized waistband shall be ruched with elastic webbing over a length of at least 80 mm at each side seam, shall be lined with outer material and interlined with an appropriate fusible interlining (see

26、 4.2.1 of SANS 1118-1), and shall fasten at the front with two hooks and bars on the extension of the band or with an acceptable alternative. The nominal width of the elastic webbing shall be 35 mm. Amdt 1 5.3.3 Fly The fly shall be furnished with an appropriate interlocking slide fastener (see 4.2.

27、4 of SANS 1118-1). It shall be secured with a bar tack at the fork end. Amdt 1 5.3.4 Pockets Pocket bags shall be of pocketing of an appropriate type (see 4.2.2 of SANS 1118-1), and shall be bar-tacked at each end of the pocket mouth. On shorts, the hip pocket shall be of the patch type and shall fa

28、sten with a button or a press-stud. Amdt 1 5.3.5 Bottoms All bottoms shall be blind-felled. 5.3.6 Buttonholes Each buttonhole shall be of such length as to acceptably accommodate the relevant button, and shall preferably be gimped and barred or fishtailed. 5.3.7 Seams Seams shall have a width of at

29、least 9 mm. All exposed edges shall be overlocked, bound, or turned in and stitched down. The seat seam shall be sewn with stitch type 401 (see SANS 10101). Side seams and inside leg seams shall be seam type SSa-1 (see SANS 10101) and pressed open or safety stitched. 5.3.8 Hems The finished width of

30、 trouser hems shall be at least 50 mm. 5.3.9 Allowance for alterations Except in the case of trousers and shorts with an elasticized waistband, an allowance of at least 60 mm shall be provided at the waist on the seat seam, waistband and lining (at least 30 mm on each side of the seat seam). 6 Packi

31、ng, care-labelling and marking The requirements of clause 5 of SANS 1118-1 shall apply. Amdt 1 7 Inspection Inspection shall be done in accordance with clause 6 of SANS 1118-1. Amdt 1 SANS 1118-3:2008 Edition 3.3 7 Annex A (normative) Notes to purchasers The following requirements shall be specified in tender invitations and in each order or contract: a) the type and colour(s) of the outer material (see 4.1); b) when relevant, that a fob pocket is required (see 5.1); c) the style (see 5.1); and d) the size designation(s) required (see 5.2). Standards South Africa